• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 1993.10a
• /
• pp.106-112
• /
• 1993

This paper presents the optimum design of reinforced concrete conical shell which is fixed at the base and free at the top. The calculation of stresses is done using the SMAP(Segmented Matrix Analysis Package)program which uses the simple finite element method of analysis. The objective function contains the ratios of the unit cost of reinforcements and formwork to that of concrete. To Simplify the optimization procedure, the final optimum design of conical shell is obtained by combining the result of each element. The results are presented and discussed.

• Proceedings of the Safety Management and Science Conference
• /
• 2010.04a
• /
• pp.137-140
• /
• 2010

국가 또는 단체가 기후변화에 대응하기 위해서는 온실가스 배출량을 정확하게 파악하고, 실현가능한 감축목표를 설정한 뒤, 각 세부 분야에서 효과적인 감축전략 및 계획을 세워야 한다. 탄소발자국은 인간의 활동이 환경에 어떠한 영향을 미치는가를 나타내는 지표이다. 탄소발자국을 계산하기 위해서는 직접 영역과 간접 영역으로 세분화하여 계산하여야 한다. 본 연구에서는 단위 범위 차원의 탄소발자국 계산 방법을 연구하였다.

• Korean Journal of Crystallography
• /
• v.7 no.2
• /
• pp.196-200
• /
• 1996

The transformation processes from unit cell data, Miller indices and atomic coordinates of non-standard space groups to the ones of the standard space groups in monoclinic system and the calculation processes of their standard deviations have been shown and computerized. The computer programs can be applied to all the seven crystal systems.

• The Mathematical Education
• /
• v.49 no.3
• /
• pp.375-387
• /
• 2010

The focus of this article is the strategies young children use to solve rectangular covering tasks before they have been taught area measurement. seventy nine children from Grade 1 to 4 were observed while they solved various array-based tasks, and their drawing and explanation were collected and analyzed. Children's solution strategies were classified into incomplete covering, inadequate array, array constructed from moveable unit, measurement of one dimension, measurement of two dimension, and calculation. Implications for the learning of area measurement are addressed.

• Proceedings of the Korea Concrete Institute Conference
• /
• 1991.10a
• /
• pp.51-58
• /
• 1991

In staically indeterminate structures torsional stiffness is an important factor for prediction of mechanical behavior at all loading stages in reinfored concrete beams, which also for calculation of torsional moment. This paper proposes equation for postcracking torsional stiffness of reinforced concrete beams under pure torsion, which is derived considering the equilibrium and compatibility condition for shear panel based on the variable angle space truss model. The equation describes well the effect according to the variation of aspect ratio and steel volume ratio per unit concrete volume. It agress with experimental results in this paper as well as available literature.

• IE interfaces
• /
• v.6 no.2
• /
• pp.91-101
• /
• 1993

Developed in this paper is a standard time data for shirt sewing operations in the apparel-making industry. Since this data is made of formula developed for each unit operation and includes the formula for the machine time calculation, users could use it for obtaining the normal or standard time without any special efforts. In addition, this data handles the variations due to the design changes of a shirt through the parameters in the formula. compared with the MTM-1. The standard time data developed is shown to be easier and faster in determining the standard time with acceptable accuracy.

• Bulletin of the Korean Chemical Society
• /
• v.12 no.1
• /
• pp.67-70
• /
• 1991

A hexagonal hexamer of water cluster is optimized by ab initio method using the 4-31G basis set. At this geometry the nonadditive many-body interactions are calculated. The ab initio calculation with large basis set [T. H. Dunning, J. Chem. Phys., 53, 2823 (1970); 54, 3958 (1971)] shows that a pentagonal unit is rather stable among several kinds of clustering units of water molecules.

• Proceedings of the Korean Nuclear Society Conference
• /
• 1997.10a
• /
• pp.58-63
• /
• 1997

This paper is concerned with an algorithm based on neural networks to calculate the axial power distribution using excore defector signals in the nuclear reactor core. The fundamental basis of the algorithm is that the detector response can be fairly accurately estimated using computational codes. In other words, the training set, which represents relationship between detector signals and axial power distributions, for the neural network can be obtained through calculations instead of measurements. Application of the new method to the Yonggwang nuclear power plant unit 3 (YGN-3) shows that it is superior to the current algorithm in place.

• Journal of the Korean Solar Energy Society
• /
• v.34 no.5
• /
• pp.89-99
• /
• 2014

The determination of the solar and thermal performance of fenestration is required for the evaluation of fenestration energy performance, estimating building load. Presently, there exist several methods for determining the thermal transmission(U-value) and solar heat gain coefficient (SHGC) of fenestration system. These method are commonly grouped under calculation or experimental methods. While U-value testing and calculation methods have been long established, SHGC has been evaluated only by the method of calculation under the lack of any established testing method. However, it is difficult to assess the exact SHGC for various types of fenestration with sun-shading or other solar control systems. The purpose of this study was to evaluate the effect of interior venetian blind and roll screen on the SHGC of glazing system. SHGC has been evaluated by the KS L 9107 test method and exiting calculation method for precise comparison of the energy performances of various shading devices. In this research, the test sample consists of three different types of double glazing unit with venetian blind and roll screen. Slat angles of venetian blind were changed to $-45^{\circ}$, $0^{\circ}$, and$-45^{\circ}$. For the roll screen, measurements were taken with the roll screen in the closed position. In result, the venetian blind reduced SHGC by 21.2~28.4% at $45^{\circ}$, when compared to the double glazing unit. The roll screen reduced SHGC by 34.4~41.7% at closed. The differences between the measured and calculated SHGC were found to range between 0.001(0.2%) and 0.047(11.1%) for all test cases. For the cases of venetian blind $-45^{\circ}$, $0^{\circ}$ and $45^{\circ}$, the deviation ratio were 3.6~9.8%, 1.1~2.6%, 4.2~11.1%, respectively. For the case of roll screen, the deviation ratio were 4.1~5.7%.

• Korean Chemical Engineering Research
• /
• v.57 no.5
• /
• pp.628-636
• /
• 2019

In various industrial processes, piping serves as a link between unit processes and is an essential installation for internal flow. Therefore, the optimum design of the piping system is very important in terms of safety and cost, which requires the estimation of the pressure drop, flow rate, pipe size, etc. in the piping system. In this study, we developed a software that determines pressure drop, flow rate, and pipe size when any two of these design variables are known. We categorized the flows into single phase, homogeneous two phase, and separated two phase flows, and applied suitable calculation models accordingly. We also constructed a system library for the calculation of the pipe material, relative roughness, fluid property, and friction coefficients to minimize user input. We further created a costing library according to the piping material for the calculation of the investment cost of the pipe per unit length. We implemented all these functions in an integrated environment using a graphical user interface for user convenience, and C # programming language. Finally, we verified the accuracy of the software using literature data and examples from an industrial process with obtained deviations of 1% and 8.8% for the single phase and two-phase models.