• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2001년도 하계종합학술대회 논문집(2)
• /
• pp.57-60
• /
• 2001

A readout circuit for Dual band IR detector was proposed and designed. Designed circuit provide to detector a stable diode bias and high injection efficiency using Buffered Direct Injection (BDI) input circuit. Then, amplifier in the unit cell is operated when cell is selected in order to minimize the power consumption. We could confirm through the simulation that designed circuit integrate and output simultaneously the signal generating from the dual band IR detector.

• 한국표면공학회지
• /
• 제19권2호
• /
• pp.51-58
• /
• 1986

A theoretical model was proposed to predict the rate of particles impinging on the negatively biased substrate and the total kinetic energy per unit time. The model takes into an account of kinetic theory based on Maxwell statistics and elementary plasma theory, incorporated with Hertz-Knudsen's evaporation theory. It is found that as the bias potential increases the ion flux and kinetic energy increases to a value above which the effect of potential is insignificant.

• Journal of electromagnetic engineering and science
• /
• 제12권2호
• /
• pp.166-170
• /
• 2012

This paper presents a tunable composite right/left-handed (CRLH) delay line for a delay line discriminator that linearizes modulated frequency sweep in a frequency modulated continuous wave (FMCW) radar transmitter. The tunable delay line consists of 8 cascaded unit cells with series varactor diodes and shunt inductors. The reverse bias voltage of the varactor diode controlled the group delay through its junction capacitance. The measured results demonstrate a group delay of 8.12 ns and an insertion loss of 4.5 dB at 250 MHz, while a control voltage can be used to adjust the group delay by approximately 15 ns. A group delay per unit cell of approximately 1 ns was obtained, which is very large when compared with previously published results. This group delay can be used effectively in FMCW radar transmitters.

• 한국항해항만학회지
• /
• 제26권2호
• /
• pp.215-220
• /
• 2002

본 논문에서는 DTV 중계기용 Temperature Independent Biasing을 이용한 100 watt급 단위 전력증폭기를 설계한 후, 제작하였다. $20^{\circ}C$에서 $100^{\circ}C$까지의 온도변화에 대하여 단위 전력증폭기의 DC 동작점은 능동 바이어스에 의해서 고정되며, 증폭기의 소모전류의 변화량이 0.6A 이하의 우수한 특성을 얻었다. 제작된 단위 전력증폭기는 12dB 이상의 이득, $\pm$0.5dB 이하의 이득 평탄도, DTV 중계 주파수범위(470-806 MHz)에 걸쳐 15dB 이하의 입.출력 반사손실을 나타내었다. 100 Watt 단위 전력증폭기는 출력 전력이 100 watt일 때 2MHz의 오프셋에서 32dBc 이상의 상호 변조 왜곡(IMD)을 나타내었다.

• 한국소음진동공학회논문집
• /
• 제22권10호
• /
• pp.959-967
• /
• 2012

The theory for a new electromagnetically biased diskless combined radial and axial magnetic bearing is developed. A typical magnetic bearing system is composed of two radial magnetic bearings and an axial magnetic bearing. The axial magnetic bearing with a large axial disk usually limits rotor dynamic performance and makes assembling and disassembling difficult for maintenance work. This paper proposes a novel electromagnet biased integrated radial-axial magnetic bearing without axial disk. This integrated magnetic bearing uses two axial coils to provide the bias flux to the radial and axial air gaps of the combined bearing. The axial magnetic bearing unit in this combined magnetic bearing utilizes reluctance forces developed in the non-uniform air gaps such that the axial disk can be removed from the bearing unit. The 4-pole homopolar type radial magnetic bearing unit is also designed and analyzed. Three dimensional finite element model for the bearing is also developed and analyzed to illustrate the diskless combined magnetic bearing.

• Journal of Positioning, Navigation, and Timing
• /
• 제9권3호
• /
• pp.175-182
• /
• 2020

This paper introduces a study to estimate the user altitude in need of rescue in an emergency. The altitude is estimated by using the barometric pressure sensor embedded in the smartphone. Compared to GPS, which is degraded in urban or indoor environments, it has the advantage of not having spatial restrictions. With the endless development of smartphone hardware, it is possible to estimate the absolute altitude using the measured value if only the bias of the embedded barometric pressure sensor is applied. The altitude information of the person in need of rescue in an emergency is a great help in reducing rescue time. Since time is tight, we propose online calibration that provides the barometric pressure sensor bias used for altitude estimation through database. Furthermore, experiments were conducted to understand the characteristics of the barometric pressure sensor, which is greatly affected by wind. At the end, the altitude estimation performance was confirmed through an actual field tests in various floors in the building.

• 한국의류산업학회지
• /
• 제10권6호
• /
• pp.989-996
• /
• 2008

The purpose of this study is to provide the basic knowledge for the pattern development of a flared skirt. Two flat pattern (FP) methods, the concentric circle method and the corrected concentric circle method, and a draping were used for pattern making. Using these patterns, skirts were made with lengthwise grain in the centerline. The influence of pattern making method on the silhouette of the flared skirt was evaluated by the hemlines formed at the skirt worn in a dress form. Moreover, the combined influence of pattern making method and cutting direction on the silhouette of the flared skirt was examined with the draping pattern (DP) skirt and a FP skirt with $45^{\circ}$ bias grain in the centerline. The DP skirt had more uniform nodes and formed a stable wave form than the FP skirts throughout the whole hemlines. The number of nodes was reduced with lining in the two FP skirts, whereas the number of nodes was not changed in the DP skirt. The unit wave form of all the skirts by three patterns showed long loop form, and the slope angles of the unit wave form of the two FP skirts were higher than that of the DP skirt. The silhouette of the flared skirt was highly influenced by the shape of the waist circumference line in patterns. The DP skirt with lengthwise grain in the centerline showed good silhouette with uniform nodes and high marking efficiency, compared to the FP skirt with $45^{\circ}$ bias grain in the centerline.

• 한국해양공학회:학술대회논문집
• /
• 한국해양공학회 2003년도 춘계학술대회 논문집
• /
• pp.149-156
• /
• 2003

This paper presents an underwater hybrid navigation system for a semi-autonomous underwater vehicle (SAUV). The navigation system consists of an inertial measurement unit (IMU), an ultra-short baseline (USBL) acoustic navigation sensor and a doppler velocity log (DVL) accompanying a magnetic compass. The errors of inertial measurement units increase with time due to the bias errors of gyros and accelerometers. A navigational system model is derived to include the error model of the USBL acoustic navigation sensor and the scale effect and bias errors of the DVL, of which the state equation composed of the navigation states and sensor parameters is 25 in the order. The conventional extended Kalman filter was used to propagate the error covariance, update the measurement errors and correct the state equation when the measurements are available. Simulation was performed with the 6-d.o.f. equations of motion of SAUV in a lawn-mowing survey mode. The hybrid underwater navigation system shows good tracking performance by updating the error covariance and correcting the system's states with the measurement errors from a DVL, a magnetic compass and a depth senor. The error of the estimated position still slowly drifts in horizontal plane about 3.5m for 500 seconds, which could be eliminated with the help of additional USBL information.

• Journal of Periodontal and Implant Science
• /
• 제51권1호
• /
• pp.3-17
• /
• 2021

Purpose: The pathology of peri-implantitis is still not fully understood and there have been recent challenges to the consensus on its aetiology and pathology, especially in comparison with periodontitis. The assessment of biomarkers allows a comparison of the pathology of these diseases. The aim of this systematic review was to answer the research question: "Is there a difference in the biomarkers associated with peri-implantitis compared with periodontitis in adult humans?" Methods: Electronic databases were searched and screened, and a manual search was also undertaken. The inclusion criteria were adults with peri-implantitis who had been compared to adults with periodontitis with the outcome of biomarkers assessed via biopsies or crevicular fluid samples in primary or secondary care settings, as recorded in case-control, case series and retrospective, prospective and cross-sectional observational studies. Two reviewers independently screened titles and abstracts and assessed full text articles for eligibility and inclusion. Both reviewers independently extracted data and assessed risk of bias. Differences in biomarker levels were the primary outcome and a narrative review was undertaken due to the heterogeneity of studies. Results: In total, 2,374 articles were identified in the search, of which 111 full-text articles were assessed for eligibility and 13 were included in the qualitative synthesis. Five of the 13 included studies were deemed to be at high risk of bias, with the others having moderate risk. All studies were cross-sectional and performed at university hospitals. Nine of the 13 included studies found significant differences in the levels of biomarkers or their ratios between periimplantitis and periodontitis. Four of the studies found no significant differences. Conclusions: Within the limitations of the included studies, it appears that there may be a difference in biomarker levels and ratios between peri-implantitis and periodontitis, suggesting that these disease processes are somewhat distinct.

• 한국정보통신학회논문지
• /
• 제3권2호
• /
• pp.339-346
• /
• 1999

본 논문에서는 INMARSAT-C형 위성통신단발기의 수신단의 회로설계, 제작 및 특성측정을 수행하였다. INA-03184를 이용한 고이득증폭단은 양단 정합된 단일 증폭기 형태로 제작하였으며, 바이어스 안정화 저항을 사용하여 회로의 전압강하 및 전력손실을 가능한 줄이고 온도 안정성을 고려하여 Active 바이어스회로를 사용하였으며, 스퓨리어스를 감쇄시키기 위해서 저잡음증폭기와 고이득증폭단 사이에 대역통과 필터를 사용하였다 측정 결과, 사용 주파수 대역내에서 60 dB 이상의 이득, 44.83 dBc의 스퓨리어스 특성 및 1.8:1 이하의 입ㆍ출력 정재파비를 나타냄으로써 설계시 목표로 했던 사양을 만족시켰다.