• 제목/요약/키워드: Unit Water Content

검색결과 361건 처리시간 0.023초

실내 다짐시험을 통한 유기물 함량에 따른 저온 다짐 특성 분석 (Evaluation of Low-temperature Compaction Characteristics According to Organic Matter Content through Laboratory Compaction Tests)

  • 최현준;김세원;이승주;박현태;최항석;김영석
    • 한국지반공학회논문집
    • /
    • 제40권3호
    • /
    • pp.93-100
    • /
    • 2024
  • 저온 다짐의 경우 간극수 동결이 발생되어 상온에서의 다짐 특성과 상이한 양상이 발생된다. 특히, 캐나다 알버타주와 같이 유기질토가 많이 분포되어 있는 지역에서는 보수성과 압축성이 크고 동결·융해에 민감한 유기질토의 특성에 따라 유기물 함량이 다짐 성능에 주요한 영향을 미친다. 알버타주는 환경규제로 인하여 굴착토를 활용하여 되메움을 수행해야 하며 고위도에 위치하는 지리적인 특성으로 동절기가 길어 건설공사를 진행하기에 불리한 조건을 가지고 있다. 본 논문에서는 유기질토의 유기질 함량에 따른 저온 다짐 특성을 평가하기 위하여 실내 다짐시험을 수행하였다. 실험 결과, 유기질 함량이 증가할수록 최적함수비가 증가하였고 최대건조단위중량이 최대 21.9% 만큼 감소되었다. 또한, -4℃ 이하의 온도조건에서는 최적함수비가 나타나지 않고 함수비가 증가할수록 건조단위중량이 감소하는 것으로 분석되었다.

ALC 블록성능의 기포콘크리트 배합설계 연구 (Foamed Concrete with a New Mixture Proportioning Method Comparable to the Quality of Conventional ALC Block)

  • 양근혁
    • 한국건축시공학회지
    • /
    • 제15권1호
    • /
    • pp.1-7
    • /
    • 2015
  • 본 연구의 목적은 ALC 블록대체를 위한 고성능 기포콘크리트 배합설계를 개발하는 것이다. 대기양생 하에서 기포콘크리트의 고강도 발현(특히 초기재령에서)을 위하여 결합재 및 혼화제를 사전연구에서 다음과 같이 설계하였다. 규산3칼슘이 60% 이상인 보통포틀랜드시멘트에 무수석고 3%를 첨가하였으며, 폴리카르본산계 감수제에서 폴리알킬에테르 성분을 28%로 조절하였다. 이들 재료를 사용하여 물-결합재비와 단위결합재양을 변수로 기포콘크리트 11배합을 실험하였다. 배합된 기포콘크리트의 품질 및 실용성은 KS 규격의 ALC 블록의 요구조건 및 기존의 일반 기포콘크리트와 비교하였다. 실험결과 본 연구의 고성능 기포콘크리트는 ALC 블록의 요구조건을 만족하면서 높은 실용가능성을 보였다.

롤러 전압 콘크리트 포장의 공기량 및 기포간격계수와 장기 내구성의 상관관계 분석을 위한 실험적 연구 (Experimental Study on Correlation Analysis of Air-void, Air-spacing factor and Long-term Durability for Roller-compacted Concrete pavement)

  • 이준희;이승우
    • 한국도로학회논문집
    • /
    • 제18권1호
    • /
    • pp.63-72
    • /
    • 2016
  • PURPOSES : The use of roller-compacted concrete pavement (RCCP) is an environmentally friendly method of construction that utilizes the aggregate interlock effect by means of a hydration reaction and roller compacting, demonstrating a superb structural performance with a relatively small unit water content and unit cement content. However, even if an excellent structural performance was secured through a previous study, the verification research on the environmental load and long-term durability was conducted under unsatisfactory conditions. In order to secure longterm durability, the construction of an appropriate internal air-void structure is required. In this study, a method of improving the long-term durability of RCCP will be suggested by analyzing the internal air-void structure and relevant durability of roller-compacted concrete. METHODS : The method of improving the long-term durability involves measurements of the air content, air voids, and air-spacing factor in RCCP that experiences a change in terms of the kind of air-entraining agent and chemical admixture proportions. This test should be conducted on the basis of test criteria such as ASTM C 457, 672, and KS F 2456. RESULTS : Freezing, thawing, and scaling resistance tests of roller compacted concrete without a chemical admixture showed that it was weak. However, as a result of conducting air entraining (AE) with an AE agent, a large amount of air was distributed with a range of 2~3%, and an air void spacing factor ranging from 200 to $300{\mu}m$ (close to $250{\mu}m$) coming from PCA was secured. Accordingly, the freezing and thawing resistance was improved, with a relative dynamic elastic modulus of more than 80%, and the scaling resistance was improved under the appropriate AE agent content rate. CONCLUSIONS : The long-term durability of RCCP has a direct relationship with the air-void spacing factor, and it can be secured only by ensuring the air void spacing factor through air entraining with the inclusion of an AE agent.

조강슬래그시멘트를 이용한 콘크리트의 기초물성에 관한 연구 (A fundamental Study on the properties of Concrete by using the Rapid Hardening Blast Furnace Slag Cement)

  • 김진춘;최광일
    • 한국콘크리트학회:학술대회논문집
    • /
    • 한국콘크리트학회 1995년도 봄 학술발표회 논문집
    • /
    • pp.72-77
    • /
    • 1995
  • Blast-furnace slag cement has been used widely as a structural material due to the latent hydraulicity of granulated ground blast furnace slag(GGBS)for a long time as The wall as ordinary portland cement. In this study, based on the fundamental investigation on the high strength and high durable concrete using the high fineness GGBS the following remarks can be made. 1) The average desired strenth of concrete is Or=600~800kg/$\textrm{cm}^2$. 2) The above high strength concrete using the high fineness GGBS is more workable than those using only OPC. 3) The adiabatic temperature and drying shringkage decrease, so the density and resistance to sea water attack increase as results. 4)The unit cement content and unit air entrained admixture at the same desired strength of concrete decrease, so the economical high strength concrete can be manufactured from using the high fineness GGBS.

  • PDF

Efficiency factor of high calcium Class F fly ash in concrete

  • Sata, V.;Khammathit, P.;Chindaprasirt, P.
    • Computers and Concrete
    • /
    • 제8권5호
    • /
    • pp.583-595
    • /
    • 2011
  • This paper studied the cement efficiency factor (k factor) of high calcium Class F fly ash. This k factor represents a unit of fly ash with efficiency equivalent to k unit of cement. The high calcium Class F fly ash was used to replace cement in concrete. The modified Bolomey's law with linear relationship was used for the analysis of the result of compressive strength, cement to water ratio (c/w) and fly ash to water ratio (f/w) by using the multi-linear regression to determine the k factor and other constants in the equations. The results of analysis were compared with the results from other researcher and showed that the k factor of high calcium Class F fly ash depends on the fineness of fly ash, replacement level and curing age. While the amount of CaO content in Class F fly ash not evident. Furthermore, necessary criteria and variables for the determination of the k factor including the use of the k factor in concrete mix design containing fly ash were proposed.

C.S.G 재료의 일축압축강도에 미치는 영향인자 (The Factors Affecting the Unconfined Compressive Strength of C.S.G Materials)

  • 김기영
    • 한국지반공학회논문집
    • /
    • 제22권10호
    • /
    • pp.33-45
    • /
    • 2006
  • C.S.G(Cemented Sand and Gravel) 재료는 댐 수몰지로부터 쉽게 얻을 수 있는 굴착토와 하상자갈에 소량의 시멘트와 물을 혼합한 재료를 총칭하는 것으로 최근 댐, 도로, 호안등의 건설재료로 그 활용성이 점차 증가하고 있다. 통상적으로 C.S.G 재료의 강도특성은 입도분포, 단위시멘트량, 재령, 그리고 함수비 등과 같은 여러 가지 요소에 의하여 영향을 받는 것으로 보고되고 있다. 본 연구에서는 화북댐 유역의 하상자갈을 3가지 종류의 입도분포로 재구성하여 재령, 단위시멘트량 그리고 함수비의 혼합 비율에 따른 일축압축강도의 변화를 연구하였다. 실험결과 C.S.G 재료의 일축압축강도는 상기 영향 인자들에 의하여 다양하게 영향을 받았으며, 특히 입도분포와 단위수량은 C.S.G 재료의 강도를 결정하는데 매우 중요한 인자임을 알 수 있었다. 또한 이러한 실험적 결과를 토대로 각 영향인자를 고려한 강도 예측식을 제안함으로써 설계 및 시공에 필요한 기초적인 자료를 제공하고자 한다.

저소성 세립분 함량이 카올리나이트-모래 혼합토의 공학적 특성에 미치는 영향 (Effect of Low-Plastic Fine Content on the Engineering Properties of Kaolinite-Sand Mixture)

  • 판야봇 카오톤;이수형;최영태;윤찬영
    • 한국지반공학회논문집
    • /
    • 제37권7호
    • /
    • pp.35-42
    • /
    • 2021
  • 본 연구에서는 다양한 카올리나이트 혼합비에 따른 카올리나이트-모래 혼합토의 특성을 실험적으로 분석하였다. 이를 위하여 기본물성실험과 다짐시험을 실시하고 그 결과를 분석하였으며, 카올리나이트와 모래입자 간의 상호 구조를 더욱 자세히 분석하기 위하여 현미경 사진을 이용한 관측을 추가적으로 수행하였다. 실험결과, 카올리나이트 혼합비가 증가할수록 비표면적의 증가에 따른 함수비의 증가 및 모래입자와의 강한 결합구조를 형성하는 것으로 나타났으며, 최대 건조밀도는 감소하고 초기간극비는 증가하는 것으로 나타났다. 현미경 사진 분석 결과, 세립분 함량의 증가에 따라 모래의 특성이 지배적인 비율, 중간 비율, 세립분의 특성이 지배적인 비율을 확인할 수 있었으며, 세립분의 함량이 25-40% 정도인 경우에 입자간 상호작용이 잘 이루어지는 것을 관측할 수 있었다.

현장 품질관리를 고려한 경량골재 콘크리트의 시방서 개정안에 대한 고찰 (Proposals for Revision of Lightweight Aggregate Concrete Specifications Based on In-situ Quality Control on Concrete)

  • 이경호;양근혁
    • 한국건축시공학회지
    • /
    • 제18권3호
    • /
    • pp.211-218
    • /
    • 2018
  • 이 연구에서는 국내산 인공 경량골재를 사용한 콘크리트의 실험결과를 바탕으로 콘크리트 표준시방서의 관련내용에 대한 합리성 및 개정의 필요성을 평가하였다. 국내 표준시방서의 내용은 ACI 211.2, ACI 213, ACI 301, JASS 5 및 CEB-FIP 시방내용들과 비교하였다. 국내산 인공 경량 잔골재의 연속적 입도분포를 위해서는 최대직경 2.5mm 이하의 천연모래 혼입이 요구되었다. 경량골재 콘크리트의 재료분리 및 과도한 블리딩을 제어하기 위해서는 현재 시방서에서 제시된 최대 물-결합재비와 단위수량에 대한 수정이 요구되었다. 특히, 배합 목표성능인 초기 슬럼프, 28일 압축강도, 공기량 및 기건 단위용적중량에 대해 경량골재 콘크리트의 합리적인 배합설계 절차의 확립이 요구되었다. 결과적으로 콘크리트 표준시방서는 국내산 인공 경량골재의 특성을 고려하여 전반적이 개정이 요구되었다.

Qualitative Content Analysis of Forest Healing Experience in Forest Life

  • Kang, Hee Won;Lee, Geo Lyong
    • 인간식물환경학회지
    • /
    • 제24권3호
    • /
    • pp.301-309
    • /
    • 2021
  • Background and objective: The purpose of this study is to analyze the case of healing experience for lifestyle and environmental diseases through life and activities in the forest from the perspecitive of critical realism, and how the causal power and mechanism of the healing experience relate to forest healing factors and programs. Methods: 93 video data of people who started living in the forest for disease treatment were analyzed using a qualitative content analysis method from the perspective of critical realism. Categories for analysis include general categories (age, duration, occupation, disease name), forest therapy categories (climate therapy, plant therapy, water therapy, diet therapy, kinesiotherapy, psychotherapy), and other categories (ecology, learning and management, life tools), etc., and the unit of analysis is the context unit. Results: 1) The diseases that motivated life in the forest were digestive system diseases, lung diseases, cardiovascular diseases, endocrine system diseases, and various lifestyle-related diseases and environmental diseases in similar proportions. This indicates that forest life does not have specificity to respond to specific diseases, but provides treatment and recovery for all lifestyle and environmental diseases. 2) Among the forest therapies, climate therapy and plant therapy are related to the climatic and residential environment in the forest where 'natural persons' live. And others such as water therapy, diet therapy, kinesiotherapy, psychotherapy indicate the change from the lifestyle that caused the disease to the lifestyle for treatment and recovery. Conclusion: Life and activities in the forest provide an environment for treatment and recovery in which the healing principles such as aromatherapy, nutritional and dietary therapy, kinesiotherapy, and emotional psychotherapy are integrated in the 'real world'.

배합 및 재료요인에 따른 저수축 고성능 콘크리트의 품질 특성 (Property of tow Shrinkage High Performance Concrete depending on Mixture Proportions and Material Characteristics)

  • 한천구;김성욱;고경택;한민철
    • 콘크리트학회논문집
    • /
    • 제16권6호
    • /
    • pp.805-811
    • /
    • 2004
  • 본 연구는 배합 및 재료요인에 따른 저수축 고성능 콘크리트의 기초적 특성 및 건조 자기수축 등 품질 특성에 대하여 검토한 것이다. 실험결과 고성능 콘크리트의 기초적 물성으로 배합요인에 따른 유동성은 W/B 및 단위수량이 작을수록 크게 감소하였고, 공기량은 W/B 변화에 따라 큰 차이가 없었으나, 단위수량 증가에 따라서는 증가하였다. 또한, 압축강도는 W/B가 클수록 크게 나타났고, 단위수량 변화에 따라서는 큰 차이가 없는 것으로 나타났다. 재료요인에 따른 유동성은 시멘트의 경우 LPC가 OPC보다 작게 나타났고 SP제는 PS, NS, MS의 순으로 크게 나타났으며, 공기량은 OPC가 LPC보다 많게 나타났고, SP제는 MS PS NS의 순으로 크게 나타났다. 또한, 압축강도는 LPC가 OPC보다 초기재령에서는 작게 나타났지만, 91일 이후에는 유사하게 나타났고, SP제 종류에 따라서는 큰 차이가 없는 것으로 나타났다. 건조 및 자기수축은 배합요인에서 W/B가 클수록 단위수량이 작을수록 작게 나타났다. 단, W/B $35\%$ 및 단위수량 $145 kg/m^3$에서는 재령 49일까지 자기수축이 발생하지 않았는데, 이는 팽창재와 수축저감제의 중첩효과에 의해 자기수축이 상쇄된 것으로 분석된다. 재료요인에서 시멘트는 LPC가 OPC보다 작게 나타났고 SP제의 종류는 큰 차이가 없는 것으로 나타났다. 따라서, FA, SF, EA, SR를 혼입한 저수축 고성능 콘크리트에서 W/B는 가능한 범위내에서 크게, 단위수량은 적게 되도록 배합설계 하곤 시멘트는 IPC, SP제는 MS를 사용할 때 수축특성이 우수해짐을 알 수 있었다.