• Journal of the Korean Child Neurology Society
• /
• v.26 no.4
• /
• pp.276-279
• /
• 2018

Klinefelter syndrome a genetic disorder with various clinical manifestations. Neurological symptoms, such as seizures, are rarely reported with Klinefelter syndrome, and it response well to anti-epileptic drugs. A 5-month-old boy visited the Inha university hospital due to jerking movements and hiccups. The patient had been diagnosed with Klinefelter syndrome at birth and had a medical history of admission to the neonatal intensive care unit due to opisthotonus and ocular deviation at 26 days of age. The patient's serum testosterone level was decreased and his anti-$M{\ddot{u}}llerian$ hormone level was increased. The brain image examination was normal and the electoencephalography and other blood test results showed no specific findings. However, after admission, the patient recurred generalized tonic-clonic-seizures recurred intermittently even after the administration of antiepileptic drugs. This paper reports a case of non-febrile seizures in a child with Klinefelter syndrome who presented with a refractory course.

• Solar Energy
• /
• v.15 no.2
• /
• pp.77-90
• /
• 1995

An effective heat transfer during freezing process was proposed in the vertical cylinder to improve the effectiveness of the heat storage. Vertical cylinder was filled with pure water in order to investigate ice-shape, temperature distribution of the liquid, temperature distribution of the cylinder tube wall, total heat storage per unit mass in the test section under the two experimental conditions; inlet temperature of working fluid is constant($-10^{\circ}C$) and inlet direction of working fluid is either upward flow or downward. Both the mean temperature of the liquid and temperature difference of cylinder tube wall in the upward were lower than those in the downward. In case that the initial temperature of water was $7^{\circ}C$ and $4^{\circ}C$, the shape of ice layer in the upward was more uniform than that in the downward. In case of $1^{\circ}C$, the shape of ice layer is formed by inlet direction of working fluid. Finally, time-varying total heat energy stored in the water in the upward was higher than that in the downward.

• Food Science and Preservation
• /
• v.15 no.5
• /
• pp.736-742
• /
• 2008

To evaluate changes in functional characteristics of traditional Doenjang during aging, Doenjang was prepared using an extract of Phellinus linteus (Phellinus extract). Control Doenjang was aged without the extract. The protease activity of Doenjang prepared with Phellinus extract was 3.15 units/mL. Tyrosinase and acetylcholinesterase inhibition activities were 45.78% and 55.18% of control, respectively, in the treated sample. When Salmonella enterica serovar Typhimurium TA100 was used as a reporter strain, antimutagenic activities against the mutagens MNNG and NPD were 90.42% and 82.57% of control values in the treated sample. When S. enterica serovar Typhimurium TA98 was used, antimutagenic activities were 60.28% and 50.33% of control, respectively. Hydrogen-donating activity was 86.65% in the treated sample, which was higher than that of the control (61.69%). Daidzin (an isoflavon glucoside) levels in Doenjang prepared with Phellinus extract were higher, by 35.49 mg/kg, than the control, whereas genistin was not detected in either group. Daidzin and genistin aglycone levels were 263.01 mg/kg and 262.60 mg/kg in the control and test groups, respectively.

• Molecules and Cells
• /
• v.44 no.10
• /
• pp.770-779
• /
• 2021

Transgenic Arabidopsis thaliana expressing an anti-rabies monoclonal antibody (mAb), SO57, was obtained using Agrobacterium-mediated floral dip transformation. The endoplasmic reticulum (ER) retention signal Lys-Asp-Glu-Leu (KDEL) was tagged to the C-terminus of the anti-rabies mAb heavy chain to localize the mAb to the ER and enhance its accumulation. When the inaccurately folded proteins accumulated in the ER exceed its storage capacity, it results in stress that can affect plant development and growth. We generated T₁ transformants and obtained homozygous T₃ seeds from transgenic Arabidopsis to investigate the effect of KDEL on plant growth. The germination rate did not significantly differ between plants expressing mAb SO57 without KDEL (SO plant) and mAb SO57 with KDEL (SOK plant). The primary roots of SOK agar media grown plants were slightly shorter than those of SO plants. Transcriptomic analysis showed that expression of all 11 ER stress-related genes were not significantly changed in SOK plants relative to SO plants. SOK plants showed approximately three-fold higher mAb expression levels than those of SO plants. Consequently, the purified mAb amount per unit of SOK plant biomass was approximately three times higher than that of SO plants. A neutralization assay revealed that both plants exhibited efficient rapid fluorescent focus inhibition test values against the rabies virus relative to commercially available human rabies immunoglobulins. KDEL did not upregulate ER stress-related genes; therefore, the enhanced production of the mAb did not affect plant growth. Thus, KDEL fusion is recommended for enhancing mAb production in plant systems.

• Journal of the Korea Society of Computer and Information
• /
• v.26 no.11
• /
• pp.1-9
• /
• 2021

3D-NAND flash memory provides high capacity per unit area by stacking 2D-NAND cells having a planar structure. However, due to the nature of the lamination process, there is a problem that the frequency of error occurrence may vary depending on each layer or physical cell location. This phenomenon becomes more pronounced as the number of write/erase(P/E) operations of the flash memory increases. Most flash-based storage devices such as SSDs use ECC for error correction. Since this method provides a fixed strength of data protection for all flash memory pages, it has limitations in 3D NAND flash memory, where the error rate varies depending on the physical location. Therefore, in this paper, pages and layers with different error rates are classified into clusters through the K-means machine learning algorithm, and differentiated data protection strength is applied to each cluster. We classify pages and layers based on the number of errors measured after endurance test, where the error rate varies significantly for each page and layer, and add parity data to stripes for areas vulnerable to errors to provides differentiate data protection strength. We show the possibility that this differentiated data protection policy can contribute to the improvement of reliability and lifespan of 3D NAND flash memory compared to the protection techniques using RAID-like or ECC alone.

• Ecology and Resilient Infrastructure
• /
• v.8 no.4
• /
• pp.194-203
• /
• 2021

With the recent increase in maintenance works on water and sewer pipes as well as district heating supply pipes, pavement cutting work using pavement cutter is on the rise. The pavement cutting operation generates considerable dust (cutting sludge) as well as noise; therefore, it is necessary to apply eco-friendly technologies that have low noise and dust recovery capability. Thus far, various equipment for recovering dust have been developed; however, there is a limitation in that the environmental friendliness is not quantified. Therefore, in this study, we developed a low-noise, dust-recovery type pavement cutter that can fundamentally remove the causes of environmental hazards such as noise and dust and evaluated the eco-friendliness of the pavement cutting process performed by this cutter. To this end, an integrated water cooling-sludge recovery system composed of a vacuum device and a sludge suction unit was developed, and the developed system was applied to a pavement cutter. Subsequently, the developed equipment was applied to the test bed, and data related to its eco-friendliness were collected and evaluated. The results showed that the cutting sludge recovery rate of the developed equipment was greater than 83%, the noise level was approximately 82 - 83 dB, and the sound power level was 115 dB. The results of this study will be used as basic data to develop improved pavement cutters in the future with improved cutting sludge recovery performance and lower noise.

• Journal of Hospice and Palliative Care
• /
• v.22 no.3
• /
• pp.134-143
• /
• 2019

Purpose: This methodological study was conducted to test the reliability and validity of an instrument that measures attitudes of advance directives (ADs) among nurses. Methods: 1) Sixteen items related to attitudes in the English version of the Knowledge, Attitudinal, and Experiential Survey on Advance Directives (KAESAD) were forward/backward translated into Korean. 2) The content was validated by an expert panel (three nursing professors and eight hospice nursing specialists). 3) The preliminary 12 items were selected as a tool to assess the Korean version of Nurses' Attitudes towards Advance Directives (NAAD-K). 4) The instrument was validated by a survey (n=216). 5) It was confirmed to use the 12 items for the final version of the instrument. Results: NAAD-K was shown to be valid in terms of factors, items and content. The three factors extracted from the factor analysis were named as follows: Caring for patients with an AD (factor 1), nurses' role in informing patients (factor 2) and patient right (factor 3). The three factors explained total variance 57.796%. Factor loadings of the 12 items ranged from 0.47 to 0.93. For the 12 items, Cronbach's alpha was 0.81, and Guttman split-half coefficient was 0.78. Conclusion: This instrument was identified to be applicable with satisfactory reliability and validity for further use in measuring nurses' attitudes towards ADs in hospice and palliative care.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.12 no.3
• /
• pp.242-250
• /
• 2019

In this paper, we propose a method to predict the failure of industrial robot using Seq2Seq (Sequence to Sequence) model, which is a model for transforming time series data among Artificial Neural Network models. The proposed method uses the data of the joint current and angular value, which can be measured by the robot itself, without additional sensor for fault diagnosis. After preprocessing the measured data for the model to learn, the Seq2Seq model was trained to convert the current to angle. Abnormal degree for fault diagnosis uses RMSE (Root Mean Squared Error) during unit time between predicted angle and actual angle. The performance evaluation of the proposed method was performed using the test data measured under different conditions of normal and defective condition of the robot. When the Abnormal degree exceed the threshold, it was classified as a fault, and the accuracy of the fault diagnosis was 96.67% from the experiment. The proposed method has the merit that it can perform fault prediction without additional sensor, and it has been confirmed from the experiment that high diagnostic performance and efficiency are available without requiring deep expert knowledge of the robot.

• Journal of the Korea Society for Simulation
• /
• v.28 no.2
• /
• pp.1-14
• /
• 2019

A full scale hydrodynamic simulation that requires an accurate reproduction of shock-induced detonation was conducted for design of an energetic component system. A detailed hydrodynamic analysis SW was developed to validate the reactive flow model for predicting the shock propagation in a train configuration and to quantify the shock sensitivity of the energetic materials. The pyrotechnic device is composed of four main components, namely a donor unit (HNS+HMX), a bulkhead (STS), an acceptor explosive (RDX), and a propellant (BPN) for gas generation. The pressurized gases generated from the burning propellant were purged into a 10 cc release chamber for study of the inherent oscillatory flow induced by the interferences between shock and rarefaction waves. The pressure fluctuations measured from experiment and calculation were investigated to further validate the peculiar peak at specific characteristic frequency (${\omega}_c=8.3kHz$). In this paper, a step-by-step numerical description of detonation of high explosive components, deflagration of propellant component, and deformation of metal component is given in order to facilitate the proper implementation of the outlined formulation into a shock physics code for a full scale hydrodynamic simulation of the energetic component system.

• Communications of Mathematical Education
• /
• v.33 no.1
• /
• pp.21-34
• /
• 2019

The purpose of this paper is to investigate the differences of the mathematics anxiety and mathematical achievement of high school students according to math socialization, and to find out which mathematics anxiety causes have more influence on mathematical achievement and how much it is. For this purposes, the problem of this study as follows: firstly, are there any relationship among mathematical grades, mathematics anxiety, interest and math socialization? secondly, are there any math socialization mathematics predict to mathematical grades, mathematics anxiety, interest? lastly, are there any differences in the mathematical grades, mathematics anxiety, interest according to math socialization level? The subjects of this study consist of 479 students selected for a class of unit, in high schools located in Seoul and metropolitan area, Korea. In this study, for students math socialization, Jung(2002)'s scale was used. Mathematical anxiety & interest, Huh(1996)'s Mathematics Anxiety Scale was used. The collected data were analyzed by using the 24.0 SPSS program. The data were also tested by using the t-test, pearson correlation and multiple regression. The major results of this study were as follows: firstly, math socialization, mathematics anxiety, interest and mathematical grades have significantly related each other, secondly, the multiple regression analyses demonstrated that sub factors of math socialization were the significant predictors of mathematical grades, mathematics anxiety and interest, lastly, mathematics grades, and mathematical anxiety and interest have significant differences depending on math socialization.