• Proceedings of the Korea Society of Design Studies Conference
• /
• 2001.05a
• /
• pp.150-151
• /
• 2001

• Proceedings of the Korea Society for Simulation Conference
• /
• 2001.05a
• /
• pp.77-81
• /
• 2001

In this paper, a RAID system is modeled and simulated by using the DEVS formalism. The RA[D system interacts with a host system by using the high-speed Fibre channel protocol and stores input data in an array of IDE disks. The DEVS formalism specifies discrete event systems in a hierarchical, modular manner. The RAID system model is composed of three units: primary-PCI unit, secondary-PCI unit and CPU unit. The primary-PCI unit interfaces with the host system and caches I/O data. The secondary-PCI unit includes disks. The CPU unit controls overall system. The control algorithm of CPU and PCI transactions are analyzed and modeled. From an analysis of simulation events, we can conclude that the proposed model satisfies given requirements.

• Journal of the Korea Society for Simulation
• /
• v.11 no.1
• /
• pp.11-22
• /
• 2002

In this paper, a RAID system is modeled and simulated by using the DEVS formalism. The RAID system interacts with a host system by using the high-speed Fibre channel protocol and stores data in an array of IDE disks. The DAVS formalism specifies discrete event systems in a hierarchical, modular manner. The RAID system model is composed of three units: primary-PCI unit, secondary-PCI unit and MCU unit. The primary-PCI unit interfaces with the host system and I/O data caches. The secondary-PCI unit includes disks. The MCU unit controls overall system. The control algorithm of MCU and PCI transactions are analyzed and modeled, From the analysis of simulation events, we can conclude that the proposed model satisfies given requirements.

• Proceedings of the KIEE Conference
• /
• 1996.07b
• /
• pp.883-886
• /
• 1996

Instead of point-to-point hard wiring between substation yard equipments and SCADA RTU(Remote Terminal Unit), fibre optic cable will be used in the portion between Local Units and Central Unit in the future KEPCO 765kV substation. The connections between substation yard equipments and nearby Local Unit remain the same hard wiring. The new fibre optic system will provide security especially during ground faults and is immune to electrical noise. A prototype system will be manufactured and installed in the existing 154kV Yeosan Substation by the end of July this year and operated for one year. By incorporating the operation experiences acquired in the system, an improved system will be commercially applied to 765kV Shin-An-Seong Substation where 345kV GIS will be installed initially and act as the switching station in the year 1998. The system is composed of one Central Unit and several Local Units. The Central Unit is composed of two workstation level computers, one is in operation and the other backup, and a Communication Control Unit. The Local Unit uses the existing SCADA RTU technology and takes the form of a distributed one. Between the Communication Control Unit and Local Units, the fibre optic system with star-coupler is used.

• Korea Journal of Hospital Management
• /
• v.7 no.2
• /
• pp.124-135
• /
• 2002

The purpose of this study is to analyze a case of unit management system introduced and operated in a university hospital. The system was designed and applied to six clinical departments and centers to help to achieve the medical revenue and profit targets. The case hospital is now in the second year of the system operation. Major findings of the study are as follows; Firstly, the leadership style of the unit manager is the most important factor in management of the unit. The transformational leadership style was more effective than the transactional one. Secondly, unit manager's managerial ability is another key factor to the success or failure in achieving the responsibility targets. Thirdly, the degree of divisionalization and responsibility should be strengthened to activate both unit managers and medical specialists.

• Archives of design research
• /
• v.16 no.2
• /
• pp.111-120
• /
• 2003

This paper shows a study on a design method and its process for personalization of the industrial fabricated products, and a unit construction system design as its result. Hence this study is starting at a point, the meaning of the personalization in the industrial society to make dear, the using process to analysis with a systematic approaching method and the system of the using process to define. The system of the using process is related in the functions of the industrial product. Therefore a unit which makes up the system of the using process is defined with the technical system theory of the industrial product, and then a design of the system that is made of that units is clarified as a open system. And the propriety and the boundary of the unit construction system design is cleared up by its practical experiment with the personal computer.

• 제어로봇시스템학회:학술대회논문집
• /
• 2004.08a
• /
• pp.1264-1268
• /
• 2004

This paper presents a wafer motion modeling of the transfer unit and the control unit in the clean tube system, which was developed as a means for transferring the air-floated wafers inside the closed tube filled with the super clean airs. The motion in the transfer unit is modeled as a mass-spring-damper system where the recovering force by air jets issued from the perforated plate is modeled as a linear spring. The motion in the control unit is also modeled as another mass-spring-damper system, but in two dimensional systems. Experiments with a clean tube system built for 12-inch wafers show the validity of the presented force and motion models.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.22 no.1
• /
• pp.125-130
• /
• 2013

In this paper, in order to overcome shortcomings of manual inspection for the automotive PWM Shaft, we developed an automated inline inspection system. The automated inline inspection system consists of the work feeder unit, conveying unit, outer diameter check unit, run-out and roundness check unit, machine vision, defective separation unit and status alarm unit. We used the machine vision system for automatic inspection process and designed the inline systems for automatic feeding and selecting process. Also the repeated operation test was performed in order to verify the precision and reliability of the proposed automated inline inspection system.

• Journal of Biosystems Engineering
• /
• v.23 no.5
• /
• pp.427-438
• /
• 1998

In Korea, rotary implements are mainly utilized in the tillage operation. The attitude control system for rolling phenominon of tractors, which in caused due to uneven ground surfaces and sinkage of tractor wheels, is one of the most important control systems in agricultural tractors. The attitude control system of a rotary implement, attached on tractors, was designed and fabricated in this study. The control system was largely composed of four main units; a setting unit, a detection unit, a controller and a hydraulic unit. The implement was controlled by control signals from a computer proportional to controlled errors, on/off action of two directional solenoide valve and lift cylinder on the right lift rod. Response characteristic experiments for the control system fabricated in this study were carried out indoors and outdoors. The results of experiments showed the response characteristics sufficient to use as the attitude control system of rotary implements for agricultural tractors.

• Journal of the Korean housing association
• /
• v.17 no.3
• /
• pp.41-49
• /
• 2006

Precast concrete apartments were main stream of domestic industrialized housing around 90's, and Steel Houses applying Steel Stud technique with light weighted steel have been dominant portion since 1995. On the other hand, various building techniques including Steel Stud method and highly prefabricated and industrialized Unit method are prevailing in developed countries like Japan. Steel stud and unit box have their own merits and demerits, but the more crucial aspect is that the constant design standard should be applied in each design procedure. It entails the necessity of industrial housing development on the open system basis. In this study, the design standard for unit house will be established coping with the established preparing standard for design specifications defined by architectural law and promotion law of housing construction. That is for design standard of industrialized private housing on the open system basis. This study attempts to propose the design automation, with the method of unit construction of which the rate of pre-fabrication is the biggest, that can cope with the demand of user on the basis of open-system. Ticky-tacky is the biggest technical problem in suppling industrialization housing. Therefore, we will suggest a basic plan for design automation of unit modular housing which can raise the productivity of industrialization housing by applying open system, utilized by DB of component and unit, and solve the problem concerned about ticky-tacky.