• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2008.05a
• /
• pp.784-788
• /
• 2008

In this research, we propose a remote speech input unit, a new method of user-friendly speech input in speech recognition system. We focused the user friendliness on hands-free and microphone independence in speech recognition applications. Our module adopts two algorithms, the automatic speech detection and speech enhancement based on the microphone array-based beamforming method. In the performance evaluation of speech detection, within-200msec accuracy with respect to the manually detected positions is about 97percent under the noise environments of 25dB of the SNR. The microphone array-based speech enhancement using the delay-and-sum beamforming algorithm shows about 6dB of maximum SNR gain over a single microphone and more than 12% of error reduction rate in speech recognition.

• Journal of Korean Society on Water Environment
• /
• v.25 no.3
• /
• pp.351-362
• /
• 2009

The Soil and Water Assessment Tool (SWAT) model, semi-distributed model, first divides the watershed into multiple subwatersheds, and then extracts the basic computation element, called the Hydrologic Response Unit (HRU). In the process of HRU generation, the spatial information of land use and soil maps within each subwatershed is lost. The SWAT model estimates the HRU topographic data based on the average slope of each subwatershed, and then use this topographic datum for all HRUs within the subwatershed. To improve the SWAT capabilities for various watershed scenarios, the Spatially Distributed-HRU (SD-HRU) pre-processor module was developed in this study to simulate site-specific topographic data. The SD-HRU was applied to the Hae-an watershed, where field slope lengths and slopes are measured for all agricultural fields. The analysis revealed that the SD-HRU pre-processor module needs to be applied in SWAT sediment simulation for accurate analysis of soil erosion and sediment behaviors. If the SD-HRU pre-processor module is not applied in SWAT runs, the other SWAT factors may be over or under estimated, resulting in errors in physical and empirical computation modules although the SWAT estimated flow and sediment values match the measured data reasonably well.

• Transactions of the Korean hydrogen and new energy society
• /
• v.29 no.2
• /
• pp.212-218
• /
• 2018

Li-ion battery system is regarded as one of the most potent power sources for electrified power-trains. For the Li-ion battery system to be widely adopted in automotive applications, the performance, safety, and cycle life issues need to be properly addressed. These issues are closely related to the thermal management of battery system. Especially, the effective cooling module design is the core part for the novel battery thermal management system development. In this paper, an experimental approach was carried out as a basic part of comprehensive battery thermal management research. The main goal of this paper is to present a comparison of two cooling systems (air cooling and phase change material (PCM) based cooling) of the unit 18650 battery module. The temperature rise with different battery discharge rate (c-rate) was mainly investigated and analyzed for two types of battery cooling systems. It is expected that this study can properly contribute to providing basic insights into the design of robust battery thermal management system for vehicular applications.

• Proceedings of the Korean Institute of IIIuminating and Electrical Installation Engineers Conference
• /
• 2003.11a
• /
• pp.251-257
• /
• 2003

In this paper, a new distributed intelligent control module based on LonWorks fieldbus for air handling unit(AHU) of heating, ventilating and air-conditioning(HVAC) is proposed to replace with a conventional direct digital control(DDC) with 32 bit microprocessor. The proposed control architecture has a excellent features such as highly compact and flexible function design, a low priced smart front-end and reliable performance with various functions. This also addresses issues in control network configuration, logical design of field devices by S/W tool, Internet networking and electronic element installation. Experimental results showing the system performance are also included in this paper.

• Journal of Acupuncture Research
• /
• v.37 no.2
• /
• pp.128-135
• /
• 2020

Background: Classical acupuncture is being used in the treatment of rheumatoid arthritis (RA). To explore the biological response to acupuncture, a network-based analysis was performed on gene expression data collected from an animal model of RA treated with acupuncture. Methods: Gene expression data were obtained from published microarray studies on blood samples from rats with collagen induced arthritis (CIA) and non-CIA rats, both treated with manual acupuncture. The weighted gene co-expression network analysis was performed to identify gene clusters expressed in association with acupuncture treatment time and RA status. Gene ontology and pathway analyses were applied for functional annotation and network visualization. Results: A cluster of 347 genes were identified that differentially downregulated expression in association with acupuncture treatment over time; specifically in rats with CIA with module-RA correlation at 1 hour after acupuncture (-0.27; p < 0.001) and at 34 days after acupuncture (-0.33; p < 0.001). Functional annotation showed highly significant enrichment of porphyrin-containing compound biosynthetic processes (p < 0.001). The network-based analysis also identified a module of 140 genes differentially expressed between CIA and non-CIA in rats (p < 0.001). This cluster of genes was enriched for antigen processing and presentation of exogenous peptide antigen (p < 0.001). Other functional gene clusters previously reported in earlier studies were also observed. Conclusion: The identified gene expression networks and their hub-genes could help with the understanding of mechanisms involved in the pathogenesis of RA, as well understanding the effects of acupuncture treatment of RA.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.16 no.6
• /
• pp.4267-4275
• /
• 2015

Prefabricated houses are fabricated at the factory for approximately 60 to 80% of the entire construction process, and assembled in the field. In the process of transporting and lifting, internal and external finishes of the unit module are concerned about damages. The purpose of this study is to improve the fixing equipment by analyzing load behavior. The improved fixing equipment would minimize the deformation of internal and external finishes. In order to develop the improved fixing equipment, transporting load on the fixing equipment is analyzed using Monte Carlo simulations, and structural performance is verified by the non-linear finite element analysis. Statistical analysis shows load distribution of unit module is similar with extreme value distribution. Based on the statistical analysis and Monte Carlo simulation, the maximum transporting load is 28.9kN and 95% confidence interval of transporting load is -1.22kN to 9.5kN. The nonlinear structural analysis shows improved fixing equipment is not destructed to the limit load of 35.3kN and withstands the load-bearing in the 95% confidence interval of transporting load.

• Journal of the Korean Society for Precision Engineering
• /
• v.21 no.10
• /
• pp.86-93
• /
• 2004

This paper presents the remote measurement of the ECU signals adopted with KWP 2000 protocol using the wireless communication technique of bluetooth. The bluetooth technology will be the most promising network paradigm which can open the new area in the information technology. Especially, bluetooth module is able to link all the electrical products and personal computers to cellular phone or PDA. This research has a try to design a wireless measurement model of ECU signal based on the car telemery system using bluetooth device. In order to measure the ECU signals, we designed the interface circuits which is able to communicate between the ECU system and the terminal circuits according to the ISO, SAE regulation of communication protocol standard. A microprocessor S3c341 OX is used for the system control and communication of ECU signals. The embedded system software is programmed to measure the ECU signals using the ARM compiler and ANCI C based on Micro/OS-II kernel to communicate between two bluetooth modules using bluetooth stack. The remote measurement of ECU signals using the bluetooth was designed and implemented to evaluate the performance of wireless network to the transmit measurement data. The possibility for the remote measurement of the self diagnosis signals of ECU adopted with KWP2000 protocol verified through the developed systems and algorithms in embedded system.

• Journal of The Korean Association For Science Education
• /
• v.21 no.2
• /
• pp.264-278
• /
• 2001

The purpose of this study was to develop the web based instruction(WBI) program, to examine its effects on the science achievement, the attitude toward science, and students' perceptions on the WBI learning. The WBI program on the content of oceanography unit in Earth Science for high schools was developed using Namo 4.0, JAVA-script, Flash 4, Video Capture of SnagIt, Animation Shop graphic tools. The treatment group consisted of students who participated in the WBI program developed in this study, and the control group consisted of students who participated in the module instruction using self-learning materials. The results from this study were as follows: First, the scores of science achievement of WBI group were significantly higher than those of module group. There was not interaction effect of treatment and students' learning ability. Second, there were no significant difference in the scores of the attitude towards science learning between WBI group and module group, and there was not interaction effect of treatment and students' learning ability. Third, in the perception questionnaire of WBI learning, many students showed the WBI learning were good in terms of causing interaction between learners and web based learning materials including various images and animations. However there are several students who showed learning difficulties. For example they wonder which part is more important and what order is proper to study in hypertext environment.

• Korean Journal of Optics and Photonics
• /
• v.10 no.1
• /
• pp.15-20
• /
• 1999

Laser Scanning Unit (LSU), which is one of the core parts of laser printer, consists of LD Module, cylinder lens, polygon mirror and f$\theta$ lens. After making an initial design on each part, we optimized the one which satisfies the user specification. The optimized optical system has diffraction limited performance for the slit size of 2.7 mm$\times$1.6 mm, f$\theta$ characteristics less than 0.3% and field curvature less 1.2 mm. We also calcurate tolerance of each part based on RSS(Root Sum Square) method to manufacture LSU for mass production.

• Proceedings of the Korean Society for Bioinformatics Conference
• /
• 2003.10a
• /
• pp.236-244
• /
• 2003

Summary: The analysis of human genetic variation is one of the key issues far the understanding of the different drug response among individuals and many programs are developed for this purpose. However, current publicly available programs have so many limitations such as time complexity problem for the analysis of large amount of alleles or SNPs, difficult manipulation for installation, data import, and usage, and low-quality visual output. Here we present workbench for SNP anlaysis, SNPAnalyzer. SNPAnalyzer consists of 3 main modules: 1)Hardy-Weinberg Equilibrium ,2) Haplotype Estimation, and 3) Linkage Disequilibrium. Each module has several different widely-used algorithms for the extensive analysis and can handle large amount of alleles and SNPs with simple format. Analysis results are displayed in user-friendly formats such as table, graph and map. SNPAnalyzer is developed using C and C$^{++}$ and users can easily access through web-interftce. Availability: SNPAnalyzer can be freely implemented at http://www.istech.info/istech/board/login_form.jsp