• 한국기계가공학회지
• /
• 제14권6호
• /
• pp.129-135
• /
• 2015

This paper shows significant methods that improve the lifespan of LED modules as well as efficiently using an aluminum heat-sink for LED module in high power. It proposes a method that raises stability and lifespan to protect LED modules and the power unit when the LED module has been used for a long hours at high temperatures. During the research, we applied a method of pulse-width modulation (PWM) in order to prevent the phenomenon that the entire power of a system is turned off and the lifespan is reduced when the LED nodule reacts to the high temperatures. To protect the LED module and SMPS based on high efficiency, a temperature sensor is attached underneath the circuit board and the sensor measures the temperature of circuit board when the LED module is powered on. The electrical power connected to SMPS is controlled by PWM when the temperature of the LED module reaches a particular temperature.

• 한국전기전자재료학회논문지
• /
• 제25권12호
• /
• pp.1021-1027
• /
• 2012

In this paper, multi-string power balancing system for streetlight was developed. Accordingly, the components of the system was developed, unit converters, MPPT control unit, a bank of Li-ion battery and controls the charging and discharging. Loss by improving the efficiency of the system through the parallel operation of the unit converter output will be reduced. And by improving the efficiency of the system through the unit converter parallel operation, output losses will be reduced. Charging and discharging efficiency of the device used in a typical solar streetlight is calculated based on the maximum power input. Because of the variation of the input power has a weakness. In this paper, flexible to changes in the input, and a system was developed to minimize the cost per watt. Measure the performance of the unit module from the system, the result was more than 91%. And the charging capacity 12 V/105 Ah, module power 180 W, respectively. Should expect to be able to improve performance through continuous monitoring in the future.

• Nuclear Engineering and Technology
• /
• 제54권8호
• /
• pp.2828-2839
• /
• 2022

This study developed a safety assessment tool for geological disposal systems called APro, a systemically integrated modeling system based on modularizing and coupling the processes which need to be considered in a geological disposal system. Thermal, hydraulic, chemical, canister failure, radionuclide release and transport processes were considered in the current version of APro. Each of the unit processes in APro consists of a single Default Module, and several Alternative Modules which can increase the flexibility of the model. As an initial stage of developing the modularization concept and modeling interface, the Default Modules of each unit process were described, with one Alternative Module of chemical process. The computation part of APro is mainly a MATLAB workspace controlling COMSOL and PHREEQC, which are coupled by an operator splitting scheme. The APro model domain is a stylized geological disposal system employing the Swedish disposal concept (KBS-3 type), but the repository layout can be freely adjusted. In order to show the applicability of APro to the total system performance assessment of geological disposal system, some sample simulations were conducted. From the results, it was confirmed that coupling of the thermal and hydraulic processes and coupling of the canister failure and the radionuclide release processes were well reflected in APro. In addition, the technical connectivity between COMSOL and PHREEQC was also confirmed.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1998년도 춘계학술대회 논문집
• /
• pp.515-520
• /
• 1998

In this paper, we propose a new fault tolerant architecture for high availability systems, where for module internal operations both processor modules perform the same tasks at the same time independently of each other while for module external operations both processor modules act actively. That is, operations of synchronization between dual processor modules except clock synchronization are requested only when module external operations are executed. The architecture can not only improve system availability by reducing system reintegration time but also reduce performance degradation problem due to frequent synchronization between dual processor modules. The clock unit consists of a clock generator and a clock synchronization circuit. This supplies a stable clock signal under clock unit disorder of any processor module or rapid clock signal variation. And this architecture achieves system availability and data credibility by designing as symmetrical form.

• 한국통신학회논문지
• /
• 제33권8B호
• /
• pp.646-656
• /
• 2008

본 논문에서는 혼합형 2단 AWG 기반의 WDM-PON을 위한 MAC 칩을 설계하고 로직 시뮬레이션을 통하여 각 기능을 검증한다. 이 구조에서는 128개의 ONU와 1Gbps 용량의 32개 파장을 고려한다. 하향 전송은 각 ONU에게 할당된 별도의 단일 파장을 통하여 이루어지는 반면 상향 전송은 네 개의 ONU가 동일한 파장을 공유하도록 하였다. 따라서 동일 파장을 공유하는 ONU간 충돌을 회피하고 자원의 효율적 사용을 위하여 MAC 프로토콜이 요구된다. 이를 위해 요청/허가 기반으로 상향 채널을 공유하는 ONU 그룹 단위로 sub-MAC을 정의하여 MAC 프로토콜을 구현한다. sub-MAC은 하나의 제어부, 수신부 그리고 네 개의 송신부로 구성되므로 128개 ONU를 수용하는 가입자망은 32개의 sub-MAC을 필요로 한다. 따라서 본 논문에서는 sub-MAC 칩을 위하여 제어부의 각 기능과 기능 모듈을 정의하고 내부 신호 및 입출력 신호, 신호 간 타이밍에 따른 상태 천이도를 설계한다. 설계된 MAC 칩의 기능 검증을 위하여 ModelSIM 환경에서 로직 시뮬레이션을 수행한다.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1997년도 한국자동제어학술회의논문집; 한국전력공사 서울연수원; 17-18 Oct. 1997
• /
• pp.1428-1431
• /
• 1997

This paper presents an efficient fault diagnosis methodology for lare chemical processes. The methodology is based on a two-tier strategy, When a falt occurs in a process, a top tier identifies the sector (process part or unit) that may contain the fault(s). Afterwards, a bottom tier or lower level evaluates the suspicious sector. The process modeling methodology based on functionality-behavior relations of process units, is proposed and utilized in the top-tier. This methodology models a target process as sequences of functions and variables and their relations. In the bottom tier, each sector has a dedicated diagostic module, which is tailored to the available information or models of the sector. For the sectors selected in the top-tier diagnosis, each diagnostic module is executed to identify the actual faults within the sector. Teh utility of the methodology is illustrated in the diagnosis of the CSTR with heat exchanger.

• 대한임베디드공학회논문지
• /
• 제6권2호
• /
• pp.62-67
• /
• 2011

In this paper, Multi Mode Receiver Module is designed in one H/W module for Multi-mode Digital Broadcasting. Multi mode means Digital TV, Mobile TV and Digital Radio on the Broadcasting. and T-DMB, DAB(+), ISDB-T and DVB-T standard. Our Module can receive various broadcasting signal such as ISDB-T, DVB-T and DAB. The Multi mode Receiver Module & demuxer was implemented using the one SoC Chip has good performances to receive the multi mode signals as well as standard interface such as SPI, to connect the main CPU Unit.

• 한국지구과학회:학술대회논문집
• /
• 한국지구과학회 2005년도 추계학술발표회 논문집
• /
• pp.304-314
• /
• 2005

The present study aims to develop animation module-based teaching-learning materials for a unit of middle school 3rd grade science, which contains the movement of the solar system, through the utilization of various forms of multimedia elements. The developed materials consist of 12 in total flash animation modules covering ‘movement of the Earth,’ ‘movement of the Moon,’ movement of the Planets,‘ etc. To analyze the student responses to the science classes to which the developed animation modules were to be applied, the researcher selected for subjects two third-grade classes that were made up of 60 students and later divided for an experimental group and a control group in a middle school located in Jeonju. The experimental group was treated with the animation module-based lessons developed in the present study while the control group was taught in the traditional teacher-centered ways. Tests for the science-related attitudes of the two groups were administered and the results showed that the mean score of the experimental group was significantly higher than the mean score of the control group (p<0.05) in the categories of ‘interest’ and ‘scientific attitude’. It was thus believed that the animation module-based teaching has a positive effect on the categories of ‘interest’ and ‘scientific attitude’. To assess the qualitative dimension of the developed materials, the researcher subjected them to the utilization of the 30 local science teachers and afterwards a survey was done with the 8 crucial items taken from the WBI evaluation test developed by Multimedia Education Support Center in 1998. The result was broadly positive in terms of lesson design and from a technological point of view.

• 로봇학회논문지
• /
• 제5권4호
• /
• pp.294-301
• /
• 2010

In order to produce a convenient robot for the aged and the lower limb disabled, it is needed for the research detecting implicit walking intention and controlling robot by a user's intention. In this study, we developed sensor module system to control the walking- assist robot using FSR sensor and tilt sensor, and analyzed the signals being acquired from two sensors. The sensor module system consisted of the assist device control unit, communication unit by wire/wireless, information collection unit, information operation unit, and information processing PC which handles integrated processing of assist device control. The FSR sensors attached user's the palm and the soles of foot are sensing force/pressure signals from these areas and are used for detecting the walking intention and states. The tilt sensor acquires roll and pitch signal from area of vertebrae lumbales and reflects the pose of the upper limb. We could recognize the more detailed user's walking intention such as 'start walking', 'start of right or left foot forward', and 'stop walking' by the combination of FSR and tilt signals can recognize.

• 대한공업교육학회지
• /
• 제30권2호
• /
• pp.33-44
• /
• 2005

The purpose of this study is to suggest plans to improve the industrial high school through the inquiry of Competency-Based Education(CBE). The suggestions are as followings: (1) Selection and organization of the educational contents of industrial high school must be based on job analysis. (2) Instructional objectives must be defined as a performance objective and enabling objectives. (3) Instruction must be individualized in method, the instructional contents must be organized in the unit of module. (4) Evaluation system must be not knowledge based but performance-based. (5) Physical Environment of work shop must be organized based on facilities, equipments and machines abstracted by job analysis. (6) Competency-Based Teacher Education(CBTE) program is required to train competent teachers in practice.