• Journal of the Semiconductor & Display Technology
• /
• v.17 no.1
• /
• pp.45-49
• /
• 2018

Portable microcontroller based measurement unit is demonstrated using digital-to-analog convertor module, analog-to-digital convertor module and additional preamplifier circuit with low-budget but excellent performances. Using the designed measurement unit, the measurement of current below 1 nA with applying voltage up to 5 V is successfully carried out. With the WiFi module in microcontroller, measured data is transferred to the user's computer. To evaluate the performance of the measurement unit, the transfer curve of a commercial N-type field effect transistor was measured with the measurement unit and the results is well consistent with that measured using commercial characterization system.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2014.10a
• /
• pp.791-795
• /
• 2014

In this paper, in order to impart the aging condition of the parts, by configuring the cycle of temperature from low temperature was performed by applying the aging conditions for vehicle cockpit module. The reason for the selected modules of the cockpit vehicle parts, because the joint occurrence typical components of the room component is a first module and ceiling cockpit module. After setting the excitation profile using the BSR exciter only that this is for the module degradation after the initial and grasp the change in the dynamic characteristics of the modules based on the before and after deterioration may be made in the module, grasp the noise generating position I measured the noise and proximity. Was also visualized on the position of the joint is generated using a sound camera to objective results occurring where the joint is selected through subjective evaluation.

• Journal of the Korean housing association
• /
• v.16 no.4
• /
• pp.121-129
• /
• 2005

The major goal of this study is drawing design plan factors considering residents' life cycle and life style when remodeling design is needed. By drawing such design factors, the study will propose an alternative remodeling design plan. Such design method was defined as Multi-Dimensional module design method. And constructing data-system based on Multi-Dimensional module was secondary goal in this study. The details are as follows: Based on analysis of Residents' demand for remodeling and features of emotion-design applied to remodeling, the system which is suitable for application in remodeling design method was conducted. Based on the type of construction materials, the level value was set up according to emotion-factor application. Also, by conducting coding operation according to the distinction of construction materials, this study seeks the unit drawing method of information for constructing emotion-information system.

• School Mathematics
• /
• v.11 no.3
• /
• pp.431-462
• /
• 2009

Introduction of logarithm in mathematics textbook in the 7th national curriculum of mathematics is the inverse of exponent. This introduction is happened that students don't know the necessity for learning logarithm and the meaning of logarithm. Students also have solved many problems of logarithm by rote. Therefore, we try to present teaching unit for the logarithm according to the historico-genetic principle. We developed the learning-teaching module of unit for the logarithm according to historico-genetic principle, especially reinvention for real contexts based RME. Loaming-teaching module is carried out as the performance assessment. As a results, We find out that this module helps students understand concepts of logarithm meaningfully Also, mathematical errors of logarithm is revised after the application of learning-teaching module.

• Journal of The Korean Society of Agricultural Engineers
• /
• v.56 no.6
• /
• pp.103-111
• /
• 2014

This study was to develop the flood analysis module (FAM) for implementation of a web-based real-time agricultural flood management system. The FAM was developed to apply for an individual watershed, including agricultural reservoir. This module calculates the flood inflow hydrograph to the reservoir using effective rainfall by NRCS-CN method and unit hydrograph calculated by Clark, SCS, and Nakayasu synthetic unit hydrograph methods, and then perform the reservoir routing by modified Puls method. It was programmed to consider the automatic reservoir operation method (AutoROM) based on flood control water level of reservoir. For a $15.7km^2$ Gyeryong watershed including $472{\times}10^4m^3$ agricultural reservoir, rainfall loss, rainfall excess, peak inflow, total inflow, maximum discharge, and maximum water level for each duration time were compared between the FAM and HEC-HMS (applied SCS and Clark unit hydrograph methods). The FAM results showed entirely consistent for all components with simulated results by HEC-HMS. It means that the applied methods to the FAM were implemented properly.

• Journal of the Korean Society for Railway
• /
• v.11 no.6
• /
• pp.562-568
• /
• 2008

The modern logistics has tried not only to convert the conventional packing system into unit load system using pallet but also to enhance the fitness between packing facilities and transport modes. This is based on the goal to reduce total logistics cost by improving logistics efficiency. Since the packing unit can affect both loading rate and loading facilities, basic form of packing unit is very important to unit load system. The object of this study is to develop a new method for evaluating the effectiveness of standardized packing module. The new method is based on measure of effectiveness (MOE) which are identified by expert survey. This study has originality in that the collecting method for effectiveness of standardized packing module has not been developed up to now.

• ETRI Journal
• /
• v.19 no.3
• /
• pp.141-168
• /
• 1997

The base station (BS) in the CDMA Mobile System (CMS) connects calls through the radio interface and is designed to provide mobile subscribers with high quality service in spite of mobile subscribers motions. The BS consists of multiple base station transceiver subsystems (BTSs), a base station controller (BSC) and a base station manager (BSM). This paper is concerned with the BSC and the BSM. The BSC is located between the BTSs and the mobile switching center (MSC) connected with the public network, and to mobile subscribers via the BTSs. The BSM provides operator-interfaces per the BS and takes responsibility of operation and maintenance (OAM) of the BS. Design of the BSC is based on two module types: functional module and unit module. The functional module is used to support new services easily and the unit module to increase the system capacity economically. Both modular types are easily achieved by inserting the corresponding modules to the system. Particularly, in order to efficiently support the soft handover which is one of CDMA superior advantages, the BSC adopts a large high-speed Packet switch connecting up to 512 BTSs, and thus mobile subscribers can be provided with soft handover in high probability. The BSM is based on a commercial workstation to support OAM functions efficiently and guarantee high reliability of the functions. The BSM uses graphical user interface (GUI) for efficient OAM functions of the BS.

• Journal of The Korea Institute of Healthcare Architecture
• /
• v.29 no.2
• /
• pp.49-60
• /
• 2023

Purpose: This study aims to establish detailed spatial planning by identifying the needs for a seclusion module for emergency psychiatric patients. Methods: The necessity of medical space with seclusion function was analyzed from spatial, medical, and social perspectives. The needs for a space capable of performing three medical functions: protection, isolation, and treatment, was analyzed. Among various types of mobile medical facilities, seclusion space was considered suitable for utilizing modular construction methods, as it is the most rational method that can satisfy the environmental level of fixed healthcare facilities' space. Therefore, seclusion modules based on modular construction were planned, consisting of two protective units for stabilizing patients with psychiatric illness, one for treatment unit that can accommodate both internal and external treatment, and another one for an infectious disease isolation unit equipped with negative pressure equipment. Implications: This study analyzed the necessary medical functions of the interior space of the mobile stabilization module based on the spatial analysis of existing medical facilities, and proposed alternative spatial configurations according to treatment, seclusion, isolation functions.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.30 no.3A
• /
• pp.226-232
• /
• 2005

An on-chip debugging unit is proposed aiming performance enhancement of JTAG-based SoC systems. The proposed unit comprises a JTAG module and a core breaker. The IEEE 1149.1 standard has been modified and applied to the new JTAG module. The proposed unit eliminates redundant clock cycles included in the TAP command execution stage. TAP execution commands are repeatedly issued to perform debugging of complicated SoC systems. Simulation on the proposed unit shows some 14% performance enhancement and 50% gate count reduction compared to the conventional ones.

• KIEE International Transactions on Electrophysics and Applications
• /
• v.4C no.6
• /
• pp.295-299
• /
• 2004

A new design technique of fabricating 40 GHz up-converter modules for digital microwave radios has been developed. The design of the up-converter module is based on unit circuit blocks, which are to be characterized using a special test fixture. The complete module design may be as simple as a cascade layout of these unit circuit blocks. Also, the 40 GHz up-converter module employs a new microstrip-to-waveguide transition and a tapped edge-coupled filter, which are less sensitive to fabrication tolerances.