• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.30 no.5
• /
• pp.467-475
• /
• 2012

In this study, the problems were analyzed that derived a different position evaluation results depending on the unit grid size that are applied to the terrain slope analysis conducted to assess the its position and environmental impacts in the prior environment reviewing process of golf course construction projects. For this purpose, the unit grid size were analyzed that can precisely reflect a actual terrain by analyzing the change of a slope percentage according to the change of unit grid size about 12 golf courses is currently in progress of construction work through the environmental consultation or ongoing consultation. And the consultation availability of environmental assessment was reverified by applying the unit grid size derived through this study about a study golf course. In the result of study, the bigger grid size for slope analysis is set, the greatly gradient is changed and the slope ratio of the higher elevation was lowly evaluated in comparison with actual terrain. The analytical result that most closely match the actual terrain was extracted in the case applied $5m{\times}5m$ of the unit grid sizes setting in this study. So, we proposed this study results to the ministry of environment and could be amended the unit grid size of $5m{\times}5m$ as standard for the analysis of slope. Also, if new grid size for site evaluation is applied to the study sites, 4 sites exceed the standard suggested the existing regulations and they are not proper as golf course site in flank of environment.

• Proceedings of the Zoological Society Korea Conference
• /
• 1997.10a
• /
• pp.42-57
• /
• 1997

The multicriterion matrix technique (MM-technique) was proposed for a method of monitoring and assessment about vegetation naturalness. Four criteria and 10 subcriteria were selected and two evaluation indices such as VN-value and VN-class were used. The criteria were characterized by syntaxonomical informations of hemeroby concept and potential natural vegetation, hierarchical system between criteria, and ordinal scale of VN-values. VN-values were classified into 11 ordinal levels and condensed to five VN-classes for facilitating practical use. A vegetation map of naturalness described by combination o( two indices was proposed as an alternative resolution of the DGN map. We also discuss the organization of the map content which is a matter of grid size (unit-area). In the case study, a grid size proper to show a full account of real information of actual vegetation is less 250-grid (250 $\times$ 250 $m^2$) in a medium size of city area containing relatively fragmented ecosystems. In conclusion, it was recognized that this new assessment technique was useful and vegetation assessment was accomplished with the smaller grid size in Korea.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.12 no.1
• /
• pp.172-182
• /
• 2008

Application Contents of based on a workflow process unit in grid system is a practical work to solve the problem. To construct cooperation environment is very important because the contents are deployed and executed. And the most of cooperation is executed by workflow. Globus toolkit is the middleware for cooperation process in grid environment. However the middleware only provides basic services for constructing grid, not workflow that can provides cooperation, job scheduling, application contents management. Also Globus toolkit is suitable for huge gird community but small size pc based grid community. Therefore, this paper proposes the efficient application contents deployment system for small sizes cooperation. This system supports efficient cooperation environment with Application contents deployment and resource management provided in grid community. Also it presents information and association relation among application contents with association dictionary among application contents based on workflow process unit, and utilizes this as information for application contents deployment.

• 한국전산유체공학회:학술대회논문집
• /
• 2010.05a
• /
• pp.320-325
• /
• 2010

A multiphase CFD analysis is performed to investigate the effect of near-wall grid for simulating a subcooled boiling flow in vertical tube. The multiphase flow model used in this CFD analysis is the two-fluid model in which liquid(water) and vapor(steam) are considered as continuous and dispersed fluids, respectively. A wall boiling model is also used to simulate the subcooled boiling heat transfer at the heated wall boundary. The diameter and heated length of tube are 0.0154 m and 2 m, respectively. The system pressure in tube is 4.5 MPa and the inlet subcooling is 60 K. The near-wall grid size in the non-dimensional wall unit ($y_{w}^{+}$) was examined from 64 to 172 at the outlet boundary. The CFD calculations predicted the void distributions as well as the liquid and wall temperatures in tube. The predicted axial variations of the void fraction and the wall temperature are compared with the measured ones. The CFD prediction of the wall temperature is shown to slightly depend on the near-wall grid size but the axial void prediction has somewhat large dependency. The CFD prediction was found to show a better agreement with the measured one for the large near-wall grid, e.g., $y_{w}^{+}$ > 100.

• Journal of computational fluids engineering
• /
• v.15 no.3
• /
• pp.24-31
• /
• 2010

boiling flow in vertical tube. The multiphase flow model used in this CFD analysis is the two-fluid model in which liquid(water) and gas(vapour) are considered as continuous and dispersed fluids, respectively. A wall boiling model is also used to simulate the subcooled boiling heat transfer at the heated wall boundary. The diameter and heated length of tube are 0.0154 m and 2 m, respectively. The system pressure in tube is 4.5 MPa and the inlet subcooling is 60 K. The near-wall grid size in the non-dimensional wall unit for lqiuid phase ($y^+_{w,l}$) was examined from 101 to 313 at the outlet boundary. The CFD calculations predicted the void distributions as well as the liquid and wall temperatures in tube. The predicted axial variations of the void fraction and the wall temperature are compared with the measured ones. The CFD prediction of the wall temperature is shown to slightly depend on the near-wall grid size but the axial void prediction has somewhat large dependency. The CFD prediction was found to show a better agreement with the measured one for the large near-wall grid, e.g., $y^+_{w,l}$ > 300 at the tube exit.

• Journal of Soil and Groundwater Environment
• /
• v.19 no.1
• /
• pp.26-33
• /
• 2014

Uncertainty associated with a sampling method is very high in evaluating the degree of site contamination; therefore, such uncertainty affects the reliability of precise investigation and remediation verification. In particular, in evaluating a site for a small-sized filling station, underground utilities, such as connection pipes and oil storage tanks, make grid-unit sampling impossible and the resulting increase in uncertainty is inevitable. Accordingly, this study quantified the uncertainty related to the evaluation of the degree of contamination by total petroleum hydrocarbon and by benzene, toluene, ethylene, and xylene. When planning a grid aimed at detecting a hot spot, major factors that influence the increase in uncertainty include grid interval and the size and shape of the hot spot. The current guideline for soil sampling prescribes that the grid interval increase in proportion to the area of the evaluated site, but this heightens the possibility that a hot spot will not be detected. In evaluating a site, therefore, it is crucial to estimate the size and shape of the hot spot in advance and to establish a sampling plan considering a diversity of scenarios.

• Magazine of the Korean Society of Agricultural Engineers
• /
• v.44 no.6
• /
• pp.61-70
• /
• 2002

This study was performed to analyze the river fractal characteristics using GIS (Geographic Information System). In this study, topographical factors in river basin were grid-analyzed for each cell size and scale using GIS and regression formula was derived by analyzing correlation among topographical factors and cell size which were calculated here. And, a new rainfall-runoff model which is considering the calculated fractal dimension was developed to apply fur a river basin.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.28 no.6
• /
• pp.890-898
• /
• 2022

Dispersion of suspended sediment, caused by coastal and marine development, is a key item in assessing marine environmental impact as it adversely affects marine life by increasing the level of turbidity and decreasing the amount of sunlight in seawater. However, its estimation has not been reliable because of the absence of a standard for the data measurement and divergent approaches to the impact assessment. In this study, we examined the estimation models from 58 Marine Environmental Impact Statements (MEISs, 2012-2014) to identify the gaps in the assessment and devise ways of improving the estimation. We developed four index items-grid system; unit load, particle size, and settling velocit-to evaluate their reliability in the estimation. The mean reliability score of each index was overall low-25 for grid system, 60 for unit load, 34 for particle size, and 17 for settling velocity. To ensure high reliability, it is important to develop a standard guideline that defines precise measurement of suspended sediment for unit load and settling velocity by particle size, followed by a grid system with compatible size for modelling. This can improve the estimation and thus underlie coherent impact assessment of suspended sediment dispersion on marine environment.

• Journal of the Korean Society of Safety
• /
• v.39 no.1
• /
• pp.96-103
• /
• 2024

The demand for mass calculation of offsite consequence analysis to conduct exhaustive single-unit or multi-unit Level 3 PSA is increasing. In order to perform efficient offsite consequence analyses, the Korea Atomic Energy Research Institute is conducting model optimization studies to minimize the analysis time while maintaining the accuracy of the results. A previous study developed a model optimization method using efficient plume segmentation and verified its effectiveness. In this study, we investigated the possibility of optimizing the model through particle size distribution setting by checking the reduction in analysis time and deviation of the results. Our findings indicate that particle size distribution setting affects the results, but its effect on analysis time is insignificant. Therefore, it is advantageous to set the particle size distribution as fine as possible. Furthermore, we evaluated the effect of multithreading and confirmed its efficiency. Future optimization studies should be conducted on various input factors of offsite consequence analysis, such as spatial grid settings.

• Spatial Information Research
• /
• v.23 no.5
• /
• pp.31-40
• /
• 2015

The purpose of this paper is to propose a data transformation method for visualizing the statistical information based on the grid system which has regular shape and size. Grid is better solution than administrator boundary or census block to check the distribution of the statistical information and be able to use as a spatial unit on the map flexibly. On the other hand, we need the additional process to convert the various statistical information to grid if we use the current method which is areal interpolation. Therefore, this paper proposes the 3 steps to convert the various statistical information to grid. 1)Geocoding the statistical information, 2)Converting the spatial information through the defining the spatial relationship, 3)Attribute transformation considering the data scale measurement. This method applies to the population density of Seoul to convert to the grid. Especially, spatial autocorrelation is performed to check the consistency of grid display if the reference data is different for same statistic information. As a result, both distribution of grid are similar to each other when the population density data which is represented by census block and building is converted to grid. Through the result of implementation, it is demonstrated to be able to perform the consistent data conversion based on the proposed method.