• The Journal of Fisheries Business Administration
• /
• v.22 no.2
• /
• pp.75-99
• /
• 1991

A quantitative analysis was carried out to monitor the commercial yield level of walleye pollock Theragra chalcogramma in the east coast of Korea, based on available data on catch and fishing effort, catch per unit of effort including fish prices from 1911 to 1988, using a traditional yield model. The results from the quantitative assessment were based to estimate maximum economic yield (MEY) and optimal fishing effort (E-opt) at MEY. On the other hand, interaction aspects between danish seine fishery and trawl fishery mainly targeting walleye pollock in the east coast of Korea were studied to predict optimal situation in fishing effort level from economic point of view which gives the most benefits to the two fisheries. Total production of walleye pollock in 1911 when its catch record was begun for the first time was about 12, 000 metric tons(M/T), and then the catch trend maintained nearly at the level of 50, 000 M/T per annum, showing a decreasing trend until 1930. The highest production from historical data base on walleye pollock fishery statistics was from the years in 1939 and 1940, about 270, 000 M/T and 26, 000 M/T, respectively. No production of the fish species was recorded during the years from 1943 to 1947, and from 1949 to 1951. From 1952 onwards annual production was only available from the southern part of 38$^{\circ}$N in the east coast. During two decades from 1952 to 1970, the production had sustained about less than 30, 000 M/T every year. Annual production showed an increasing trend from 1971, reaching a maximum level of approximately 162, 000 M/T in 1981. Afterwards, it has deceased sharply year after year and amounted to 180, 000 M/T in 1988. The catch composition of walleye pollock for different fishery segments during 1970~1988 showed that more than 70% of the total catch was from danish seine fishery until 1977 but from 1978 onwards, the catch proportion did not differ from one another, accounting for the nearly same proportion. Catch per unit of effort (CPUE) for both danish seine fishery and trawl fishery maintained a decline tendency after 1977 when the values of CPUE were at level of 800 kg/haul for the former fishery and 1, 300 kg/haul for the latter fishery, respectively. CPUEs of gillnet fishery during 1980~1983 increased to about 3.5 times as high value as in the years, 1970~1979 and during 1987~1988 it decreased again to the level of the years, 1970~1978. The bottom longline fishery's CPUE wa at a very low level (20 kg/basket) through the whole study years, with exception of the value (60 kg/basket) in 1980. Fishing grounds of walleye pollock in the east coast of Korea showed a very limited distribution range. Danish seine fishery concentrated fishing around the coastal areas of Sokcho and Jumunjin during January~February and October~December. Distributions of fishing grounds of trawl fishery were the areas along the coastal regions in the central part of the east coast. Gillnet and bottom longline fisheries fished walleye pollock mainly in the areas of around Sokcho and Jumunjin during January~February and December. Relationship between CPUEs' values from danish seine fishery and trawl fishery was used to standardize fishing effort to apply to surplus production model for estimating maximum sustainable yield (MSY) and optimum fish effort (F-opt) at MSY. The results suggested a MSY of 114, 000 M/T with an estimated F-opt of 173, 000 hauls per year. Based on the estimates of MSY and F-opt, MEY was estimated to be about 94, 000 M/T with a range of 81, 000 to 103, 000 M/T and E-opt 100, 000 hauls per year with a range of 80, 000 to 120, 000 hauls. The estimated values of MEY and E-opt corresponded to 82% of MSY and 58% of F-opt, respectively. An optimal situation in the fishing effort level, which can envisage either simultaneously maximum yield or maximum benefit for both danish seine fishery and trawl fishery, was determined from relationship between revenue and cost of running the fleet : the optimal fishing effort of danish seine fishery was about 52, 000 hauls per year, corresponding to 50 danish seiners and 27, 000 hauls per year which is equal nearly to 36 trawlers, respectively. It was anticipated that the net income from sustainable yield estimated from the respective optimal fishing effort of the two fisheries will be about 3, 800 million won for danish seine fishery and 1, 000 million won for trawl fishery.

• Journal of Korean Society of Forest Science
• /
• v.105 no.2
• /
• pp.247-252
• /
• 2016

This study was conducted to evaluate the technical efficiency of Annual Chestnut production in South Korea. In this study, technical efficiency is the maximum possible production for which a certain amount of costs is inputted. For analysis on the technical efficiency we used output-oriented BCC Model, and then we analyzed correlation among input costs, production, gross income, net income, and market price per unit in order to determine the cause of variation in the technical efficiency. As study materials, we used statistics for the forestry production costs for 7 years from 2008 to 2014. The study results showed that the maximum possible production and actual production in 2008, 2009, and 2010 were 1,568 kg, 1,745 kg, and 1,534 kg by hectares in the order which were the same values. Consequently, the technical efficiency of those was all evaluated as 1.00. On the other hand, actual production from 2011 to 2014 was 1,270 kg 1,047 kg, 1,258 kg, and 1,488 kg by hectares in the order and the maximum possible production was 1,524 kg, 1,467 kg, 1,635 kg, and 1,637 kg by hectares in the analysis. From those values, the technical efficiency was evaluated in the following order:0.83, 0.71, 0.75, 0.91. The lowest value of the technical efficiency was 0.71 in 2012, and the values of this increased gradually since 2013. It is indicated that the cause of variation in the technical efficiency was related to the relationship between production and market price, and there was a negative correlation with r = -0.821 (p<0.05). The level of maximum available production per unit area was between 1,488kg in lower limit and 1,745 kg in upper limit, and the average was turned out as 1,548 kg.

• Korean small business review
• /
• v.31 no.2
• /
• pp.85-102
• /
• 2009

With the continued globalization of world markets, transfer pricing has become one of the dominant sources of controversy in international taxation. Transfer pricing is the process by which a multinational corporation calculates a price for goods and services that are transferred to affiliated entities. Consider a Korean electronic enterprise that buys supplies from its own subsidiary located in China. How much the Korean parent company pays its subsidiary will determine how much profit the Chinese unit reports in local taxes. If the parent company pays above normal market prices, it may appear to have a poor profit, even if the group as a whole shows a respectable profit margin. In this way, transfer prices impact the taxable income reported in each country in which the multinational enterprise operates. It's importance lies in that around 60% of international trade involves transactions between two related parts of multinationals, according to the OECD. Multinational enterprises (hereafter MEs) exert much effort into utilizing organizational advantages to make global investments. MEs wish to minimize their tax burden. So MEs spend a fortune on economists and accountants to justify transfer prices that suit their tax needs. On the contrary, local governments are not prepared to cope with MEs' powerful financial instruments. Tax authorities in each country wish to ensure that the tax base of any ME is divided fairly. Thus, both tax authorities and MEs have a vested interest in the way in which a transfer price is determined, and this is why MEs' international transfer prices are at the center of disputes concerned with taxation. Transfer pricing issues and practices are sometimes difficult to control for regulators because the tax administration does not have enough staffs with the knowledge and resources necessary to understand them. The authors examine transfer pricing practices to provide relevant resources useful in designing tax incentives and regulation schemes for policy makers. This study focuses on identifying the relevant business and environmental factors that could influence the international transfer pricing of MEs. In this perspective, we empirically investigate how the management perception of related variables influences their choice of international transfer pricing methods. We believe that this research is particularly useful in the design of tax policy. Because it can concentrate on a few selected factors in consideration of the limited budget of the tax administration with assistance of this research. Data is composed of questionnaire responses from foreign firms in Korea with investment balances exceeding one million dollars in the end of 2004. We mailed questionnaires to 861 managers in charge of the accounting departments of each company, resulting in 121 valid responses. Seventy six percent of the sample firms are classified as small and medium sized enterprises with assets below 100 billion Korean won. Reviewing transfer pricing methods, cost-based transfer pricing is most popular showing that 60 firms have adopted it. The market-based method is used by 31 firms, and 13 firms have reported the resale-pricing method. Regarding the nationalities of foreign investors, the Japanese and the Americans constitute most of the sample. Logistic regressions have been performed for statistical analysis. The dependent variable is binary in that whether the method of international transfer pricing is a market-based method or a cost-based method. This type of binary classification is founded on the belief that the market-based method is evaluated as the relatively objective way of pricing compared with the cost-based methods. Cost-based pricing is assumed to give mangers flexibility in transfer pricing decisions. Therefore, local regulatory agencies are thought to prefer market-based pricing over cost-based pricing. Independent variables are composed of eight factors such as corporate tax rate, tariffs, relations with local tax authorities, tax audit, equity ratios of local investors, volume of internal trade, sales volume, and product life cycle. The first four variables are included in the model because taxation lies in the center of transfer pricing disputes. So identifying the impact of these variables in Korean business environments is much needed. Equity ratio is included to represent the interest of local partners. Volume of internal trade was sometimes employed in previous research to check the pricing behavior of managers, so we have followed these footsteps in this paper. Product life cycle is used as a surrogate of competition in local markets. Control variables are firm size and nationality of foreign investors. Firm size is controlled using dummy variables in that whether or not the specific firm is small and medium sized. This is because some researchers report that big firms show different behaviors compared with small and medium sized firms in transfer pricing. The other control variable is also expressed in dummy variable showing if the entrepreneur is the American or not. That's because some prior studies conclude that the American management style is different in that they limit branch manger's freedom of decision. Reviewing the statistical results, we have found that managers prefer the cost-based method over the market-based method as the importance of corporate taxes and tariffs increase. This result means that managers need flexibility to lessen the tax burden when they feel taxes are important. They also prefer the cost-based method as the product life cycle matures, which means that they support subsidiaries in local market competition using cost-based transfer pricing. On the contrary, as the relationship with local tax authorities becomes more important, managers prefer the market-based method. That is because market-based pricing is a better way to maintain good relations with the tax officials. Other variables like tax audit, volume of internal transactions, sales volume, and local equity ratio have shown only insignificant influence. Additionally, we have replaced two tax variables(corporate taxes and tariffs) with the data showing top marginal tax rate and mean tariff rates of each country, and have performed another regression to find if we could get different results compared with the former one. As a consequence, we have found something different on the part of mean tariffs, that shows only an insignificant influence on the dependent variable. We guess that each company in the sample pays tariffs with a specific rate applied only for one's own company, which could be located far from mean tariff rates. Therefore we have concluded we need a more detailed data that shows the tariffs of each company if we want to check the role of this variable. Considering that the present paper has heavily relied on questionnaires, an effort to build a reliable data base is needed for enhancing the research reliability.

• Journal of Internet Computing and Services
• /
• v.18 no.4
• /
• pp.109-119
• /
• 2017

This paper is to analyse empirically using the data collected from Korea portal Naver's ad management system and show online ad platform may not be two-sided market. It is aim of this study to propose the appropriate approach to define the market, based on the empirical result. Here are two research questions to be reviewed. First, is there any consistency between business model of search advertising and definition of two-sided market which Rochet-Tirole proposed in 2006? Second, do indirect network externalities exist significantly in search advertising market? if so, this study is going to estimate the level of it through empirical measurement. Based on Luchetta's paper which suggested that google may be one-sided market, it performed the correlation & regression analysis to prove his suggestion. The result is that online search advertising costs increased by more than 50 won when advertisers increased by one unit. However, there was no significant correlation and regression between the search frequency and online search advertising cost. It means that there is little possibility to identify two-sidedness in online search advertising service(market) because of no(or little) indirect network externalities which are a necessary condition for two-sided market. This result has three implications, such as the availability to adapt traditional market definition tools to online search advertising market, the possibility enhancement to find the fundamental competition elements in defined market and promotion of the powers of persuasion in competitive market reality. It is significant that the gap between legal scholars including regulatory practitioners and economists can be overcome to some extent. who have shown the different perspective on the two-sided market.

• Korea Journal of Hospital Management
• /
• v.25 no.2
• /
• pp.45-56
• /
• 2020

Purpose: The purpose of this study is to investigate medical care behaviors influencing accuracy of the payment based New diagnosis-related groups (DRG) compared to fee for service (FFS) in hospitalized patients with medical illness. Methodology: In order to estimate the difference in medical costs between New DRG and FFS depending on medical care behaviors, medical records and hospital claims data (n=4,232) were utilized, which were collected from a single public hospital during the first-half of 2018. Data were analyzed by descriptive statistics, t-test, chi-square test, and multivariate binary logistic regression. Findings: The average difference in medical costs between New DRG and FFS were KRW 506,711±13,945 with incentives and KRW -51,506±12,979 without incentives, respectively. Forty-four point two percent (44.2%, n=1,872) of total subjects were shown to have negative compensation in overall medical costs with New DRG compared to the costs with FFS. Medical care behaviors that affected on the negative compensation were the presence of severe bed sores on admission, medical consultations, death, operations, medications and laboratory or imaging tests with unit price over KRW 100,000, hospital-acquired complications or underlying comorbidities, elderly patients (≧65 years), and hospitalized for more than average inpatient days defined by New DRG (p<0.001). The difference in average medical cost between New DRG and FFS for a group with mild illness was KRW -11,900±10,544, whereas it was KRW -196,800±46,364 for a group with severe illness (p<0.0001). Practical Implications: These findings suggest that New DRG payment model without incentives may incompletely cover the variation of medical costs in real clinical practice. Therefore, policy makers need to consider that the current New DRG reimbursement should be focused and refined to improve accuracy of payment on medical care resources utilized in severe and complex medical conditions.

• Journal of Korean Society of Forest Science
• /
• v.103 no.4
• /
• pp.639-645
• /
• 2014

This study was conducted to evaluate the management efficiency of oak mushroom farms in Korea using the Data Envelopment Analysis (DEA), which is one of the non-parametric estimation methods. The data that was analyzed in this study was from the result of 2013 survey entitled "Standard Diagnostic Table for Oak Mushroom Management", which was conducted from March 2012 to October 2012. This survey was based on the inputs and outputs of 20 oak mushroom farms. Specifically, this study analyzed the technical efficiency, pure-technical efficiency and scale efficiency using CCR and BCC model of the DEA methods. Furthermore, this study compares the management efficiency between the full time oak mushroom production farms and part time oak mushroom production farms. Results showed that mean value for the technical efficiency was 0.655 which is considered as inefficient in general. For the pure-technical efficiency and scale efficiency, the mean values were 0.830 and 0.747, respectively which showed that inefficiency in the management was observed in the mushroom farms. Results also showed that there were seven farms with a total efficiency of 1, namely Decision Making Unit(DMU)2, DMU5, DMU6, DMU8, DMU10, DMU15 and DMU20. The management efficiency of DMU7 specifically the inputs for production was analyzed and compared to DMU5 and DMU6 and results showed that the DMU7 had an excessive inoculation and site development cost. Lastly, it was also observed that the full time mushroom production farms were more efficient as compared to the part time mushroom farms because of the lower scale efficiency value or smaller area for mushroom production allotted in the part time farms.

• Journal of Power Electronics
• /
• v.11 no.4
• /
• pp.408-417
• /
• 2011

The plug-in hybrid electric vehicles (PHEVs) are specialized hybrid electric vehicles that have the potential to obtain enough energy for average daily commuting from batteries. The PHEV battery would be recharged from the power grid at home or at work and would thus allow for a reduction in the overall fuel consumption. This paper proposes an integrated power electronics interface for PHEVs, which consists of a novel Eight-Switch Inverter (ESI) and an interleaved DC/DC converter, in order to reduce the cost, the mass and the size of the power electronics unit (PEU) with high performance at any operating mode. In the proposed configuration, a novel Eight-Switch Inverter (ESI) is able to function as a bidirectional single-phase AC/DC battery charger/ vehicle to grid (V2G) and to transfer electrical energy between the DC-link (connected to the battery) and the electric traction system as DC/AC inverter. In addition, a bidirectional-interleaved DC/DC converter with dual-loop controller is proposed for interfacing the ESI to a low-voltage battery pack in order to minimize the ripple of the battery current and to improve the efficiency of the DC system with lower inductor size. To validate the performance of the proposed configuration, the indirect field-oriented control (IFOC) based on particle swarm optimization (PSO) is proposed to optimize the efficiency of the AC drive system in PHEVs. The maximum efficiency of the motor is obtained by the evaluation of optimal rotor flux at any operating point, where the PSO is applied to evaluate the optimal flux. Moreover, an improved AC/DC controller based Proportional-Resonant Control (PRC) is proposed in order to reduce the THD of the input current in charger/V2G modes. The proposed configuration is analyzed and its performance is validated using simulated results obtained in MATLAB/ SIMULINK. Furthermore, it is experimentally validated with results obtained from the prototypes that have been developed and built in the laboratory based on TMS320F2808 DSP.

• Journal of Korean Society of Environmental Engineers
• /
• v.37 no.4
• /
• pp.210-217
• /
• 2015

Fluoride removal by acid and heat treated red mud were studied in batch and column system regarding contact time, initial concentration, pH, adsorbent dose, and filter depth. The results showed that acid treated with 0.8 M HCl, had highest adsorption capacity of fluoride and adsorption capacity decreased as heat treatment temperature increased. Sorption equilibrium reached in 30 min at a initial concentration of 50 mg-F/L but 1 h was required to reach the sorption equilibrium at the initial concentration of 500 mg-F/L by 0.8 M acid treated red mud (0.8 M-ATRM). Equilibrium adsorption data were fitted well to Langmuir isotherm model with maximum fluoride adsorption capacity of 23.162 mg/g. The fluoride adsorption decreased as pH increased due to the fluoride competition for favorable adsorption site with $OH^-$ at higher pH. Removal percentage was increased but the amount of adsorption per unit mass decreased by adding the amount of 0.8 M-ATRM. It was concluded that the 0.8 M-ATRM could be used as a potential adsorbent for the fluoride removal from aqueous solutions because of its high fluoride adsorption capacity and low cost.

• Tunnel and Underground Space
• /
• v.23 no.6
• /
• pp.480-492
• /
• 2013

After the introduction of geothermal power generation technology based on engineering reservoir creation that can be applied on non-volcanic region, industrial need for studies on the efficient and economic execution of costly deep-depth drilling work becomes manifest increasingly. However, since it is very difficult to predict duration and cost of boring work with acceptable reliability because of many uncertain events during the execution, efficient and organized work management for drilling is not easily achievable. Especially, the round trip that discretely occurs because of the abrasion of bit takes more time as the depth goes deeper and it has a great impact on the work performance. Therefore, a technology that can simulate the occurrence timing and depth of round trip in advance and therefore optimize them is essentially required. This study divided the abrasion state of bit into eight steps for simulation cases and developed a forecast algorithm, i.e., TOSA which can analyze the depth and timing of round trip occurrence. A methodology that can divide a unit section for simulation has been suggested; while the Bourgoyne and Young model has been used for the forecast of drilling rates and bit abrasion extent by section. Lastly, the designed algorithm has been systemized for the convenience of the user.

• Korean Journal of Food Science and Technology
• /
• v.27 no.6
• /
• pp.958-963
• /
• 1995

The hydrolysis of pen shell by-product by the APL $440^{TM}$, selected as the suitable alkaline protease on the basis of cost per unit enzyme activity, was optimized using response surface methodology(RSM). A model equation obtained from the results of RSM could be used for the prediction of degree of hydrolysis(DH) as follows: $%DH=51.126+2.419\;pH+2.415T-2.426S-2.846pH^2-4.211T^2-3.014t^2+2.419S^2$. From the ridge analysis, the conditions favoring the highest degree of hydrolysis were pH 10.2, $61.4^{\circ}C$, 2.58 hrs reaction time, 30.9% substrate concentration, and 0.32% enzyme/substrate ratio. The effect of autolysis affecting degree of hydrolysis in pen shell by-product was negligible. Hydrolysate produced under the optimal condition increased 3.5 times and 7.7 times in amino nitrogen and salinity, respectively, comparing with raw pen shell by-product.