• 산업기술연구
• /
• 제24권A호
• /
• pp.119-126
• /
• 2004

BLDC Motor is one of the widely utilizable motors in servo system. The accurate calculation of the power loss for the IGBT and Inverse diode with Bipolar and Unipolar switching modes the driving modes is important for the design of drives for their heat treatment. If it were not for temperature-sensors in devices, it is difficult to get direct power loss, so. Power losses may be modeled by computer modeling to obtain the Calculation of the Power loss for Inverter in BLDC Motor with switching modes which is presented in this paper. The computer modeling is carried out by Matlab simulation. The power loss consists of conduction losses Conduction losses are the source of occurrence due to The IGBT and Inverse diode currents. Switching losses are the source of occurrence due to switching on/off in the devices, and gives the dominant influence to the loss. As a result, the unipolar I mode is best in reducing the heat losses.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2014년도 제46회 동계 정기학술대회 초록집
• /
• pp.368.1-368.1
• /
• 2014

We proposed amorphous GeSe-based ReRAM device of metal-insulator-metal (M-I-M) structure. The operation characteristics of memory device occured unipolar switching characteristics. By introducing the concepts of valance-alternation-pairs (VAPs) and chalcogen vacancies, the unipolar resistive switching operation had been explained. In addition, the current transport behavior were analyzed with space charge effect of VAPs, Schottky emission in metal/GeSe interface and P-F emission by GeSe bulk trap in mind. The GeSe ReRAM device of M-I-M structure indicated the stable memory switching characteristics. Furthermore, excellent stability, endurance and retention characteristics were also verified.

• 한국산학기술학회논문지
• /
• 제4권4호
• /
• pp.361-365
• /
• 2003

Oxide etcher장비에서 실리콘 웨이퍼를 잡고 공정을 수행할 수 있는 단극 (unipolar) 형태의 E-chuck을 제작하였다. 단극 형태의 E-chuck을 개발하기 위하여 핵심기술인 폴리이미드 박막의 코팅기술과 알미늄 표면의 양극처리기술을 개발하였다. E-chutk은 폴리이미드 재료를 표면 물질로 사용하여 플라스마에 의한 표면 손상을 최소화하였다. Oxide etcher 장비에 사용되는 핵심 부품인 E-chuck의 제조 과정을 살펴보고 히터 내장형 E-chuck을 위한 박막형 전열체 기술을 개발하였다.

• 한국결정성장학회지
• /
• 제24권2호
• /
• pp.59-64
• /
• 2014

전해질로 $Na_2SiO_3$을 사용하여 A1050 알루미늄 판재를 pulse 폭 $ 2000{\mu}sec$, impulse 420 V, 400 ${\mu}$sec의 unipolar pulse로 플라즈마 전해 산화 코팅(plasma electrolytic oxidation coating)을 하여 산화 피막을 2, 5, 15, 30분에 따라 형성시킨 다음 산화피막을 분석하였다. 표면에 형성된 산화물의 결정상은 ${\alpha}-alumina$와 ${\gamma}-Alumina$로서 시간에 따른 변화는 없었다. 반응 초반에는 ${\gamma}-Alumina$가 많이 생성되었지만 시간이 갈수록 ${\gamma}-Alumina$의 양에는 변화 없이 ${\alpha}-alumina$가 많이 생겨남을 알 수 있었다. 이런 결과는 micro plasma에 의해서 ${\gamma}-Alumina$가 우선 생성되고, 이후 계속되는 micro plasma의 열에 의해서 ${\alpha}-alumina$로의 전이가 일어나기 때문으로 판단된다.

• 한국정보통신학회논문지
• /
• 제18권5호
• /
• pp.1149-1154
• /
• 2014

본 연구는 산화물반도체트랜지스터의 터널링 현상을 살펴보기 위해서 게이트 절연막으로서 SiOC 박막을 사용하고 채널층으로 IGZO를 이용하여 트랜지스터를 제작 하였다. SiOC 박막은 분극이 작아질수록 비정질특성이 우수해지면서 절연특성이 좋아진다. SiOC 게이트 절연막과 채널 층 사이의 계면에 존재하는 접합특성은 SiOC의 분극특성에 따라서 달려졌다. 드레인소스 전류($I_{DS}$)와 게이트소스 전압($V_{GS}$)의 전달특성은 분극이 낮은 SiOC를 사용할 경우 양방향성 전달특성이 나타나고 분극이 높은 SiOC 게이트 절연막을 사용할 경우 단방향성 전달 특성이 나타났다. 터널링에 의한 양방향성 트랜지스터의 경우 바이어스 인가 전압이 낮은 ${\pm}1V$의 영역에서 쇼키접합을 나타냈었지만 트래핑효과에 의한 단방향성 트랜지스터의 경우 오믹접합 특성을 나타내었다. 특히 양방향성 트랜지스터의 경우 터널링 현상에 의하여 on/off 스위칭 특성이 개선되었다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2001년도 하계학술대회 논문집 B
• /
• pp.672-674
• /
• 2001

Axial magnetic field(AMF) type electrode can increase the interrupting capability of vacuum interrupters. But, this interrupting capability vary with design parameters such as shape of electrode, slits of contact, material of contact and so on. In this paper, shown arc characteristics of unipolar axial magnetic field type electrode for vacuum interrupter by design parameters such as shape of contact slits and diameter of contact. And, confirmed vacuum arc configuration by individual design parameter using high speed camera.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1998년도 추계학술대회 논문집 학회본부A
• /
• pp.82-84
• /
• 1998

LDM(Linear DC Motor) are used in high speed, high-precision position control system. Because of these advatages, LDM has already used in the motor of pen-recorder, magnetic-disk devices. Under the limited dimension, we propose the design method of LDM by magnetic circuit. In this paper, a relation between the thrust constant and size of a LDM that is moving coil type with unipolar is described, which is defined as a simple relational equation. To maximize the rate of thrust to the volume of LDM, the magnetic flux density in the yoke is adjusted to the value of magnetic equation By the magnetic field analysis(FEM), the validity of the equation is confirmed.

• 전력전자학회논문지
• /
• 제27권1호
• /
• pp.56-62
• /
• 2022

In this paper, the effect of pulse width modulation methods on thermal loadings and power losses of single-phase five-level NPC inverters for photovoltaic systems are analyzed. The pulse width modulation methods affect the power losses of the NPC inverters and thus lead to different thermal loadings of NPC inverters. To identify the reliability-critical power device with respect to thermal stress, the thermal loadings of I- and T-type NPC inverters are analyzed by applying the unipolar pulse modulation method. Then, the effect of the discontinuous pulse width modulation method on power losses and thermal loadings of power devices of I- and T-type NPC inverters are analyzed. Finally, the operation of NPC inverters applying the discontinuous pulse modulation method is confirmed by experiments. The results show that the discontinuous pulse modulation method is able to improve the reliability of NPC inverters by reducing thermal loadings of reliability-critical power devices and it is more effective for T-type NPC inverters than I-type NPC inverters.

• KIEE International Transactions on Electrophysics and Applications
• /
• 제5C권5호
• /
• pp.196-203
• /
• 2005

A semi-empirical method to determine the electrostatic characteristics of a diode type corona aerosol charger based on ion current measurement and electrostatic charging theory was presented. Results from mathematical model were in agreement with those from experimental investigation of the charger. Current-voltage characteristics, $N_{i}t$ product and charge distribution against aerosol size were obtained. It was shown that the space charge was significant and must be taken into account at high ion number concentration and low flow rate. Additionally, significant particle loss was evident for particles smaller than 20 nm in diameter where their electrical mobility was high. Increase in charging efficiency may be achieved by introducing surrounding sheath flow and applying AC high voltage. Overall, the approach was found to be useful in characterizing the aerosol charger.

• Nuclear Engineering and Technology
• /
• 제53권7호
• /
• pp.2289-2294
• /
• 2021

In the present study, an original spark plasma sintering-reactive synthesis (SPS-RS) method for minerallike ceramic materials based on SrAl₂Si₂O₈ feldspar-like skeleton structure was used for the first time, promising solid-state matrices for reliable immobilization of high-energy ⁹⁰Sr. The method is based on the "in-situ" reaction of a mixture of SrO, Al₂O₃ and SiO₂ oxides when heated by a unipolar pulsed current under compacting pressure. The phase and elemental composition structure were studied. The dynamics of the consolidation of the reaction mixture of oxides was studied in the range of 900-1200 ℃. The study found the temperature of the high-speed (minutes) SPS-RS formation of single-phase SrAl₂Si₂O₈ composition ceramic in the absence of intermediate reaction products with a relative density of up to 99.2% and compressive strength up to 145 MPa and a strontium leaching rate of 10^-4g/cm²·day.