• Journal of the Korean Wood Science and Technology
• /
• 제39권1호
• /
• pp.60-67
• /
• 2011

본 연구에서는 고밀도 우드세라믹을 제조하기 위한 기초 연구로서 수지함침율 및 탄화온도에 따라 제조된 1차 탄화 우드세라믹을 수지 재 함침 후 2차 탄화하여 우드세라믹을 제조하고 밀도경사를 조사하였다. 2차 탄화 후 최소, 평균 및 최고밀도가 1차 탄화 우드세라믹보다 증가하였고, 밀도경사 비율도 증가하였다. 따라서 고밀도와 밀도경사 비율이 작은 균질한 우드세라믹을 제조하기 위해서는 2차 함침과 2차 탄화에 의한 우드세라믹 제조방법도 효과가 있는 것으로 나타났다.

• 수산해양기술연구
• /
• 제22권1호
• /
• pp.29-33
• /
• 1986

This paper aims at finding out the optimum operating condition to reduce fuel consumption for the training ship Pusan 402 with controllable pitch propeller. For this purpose, this paper examints the variation of ship speed and fuel consumption in accordance with the change of engine revolution and propeller pitch. The results obtained are as follows: 1. When engine revolution is constant, the ship speed sluggishly increases according to the increase of propeller pitch but fuel consumption extremely increases. The higher revolution the engine is, the more remarkable this tendency is. 2. As the engine revolution becomes lower, the fuel consumption per mile decreases. Howt.er = the fuel consumption under the same engine revolution differs according to the propeller pitch. 3. Specific fuel consumption is uniformed about 180g/ps.h at any case of load. 4. Among the various operating conditions which yield the same ship speed, fuel consumption lowers in the case of lower engine revolution and larger propeller pitch.

• 한국전기전자재료학회논문지
• /
• 제29권7호
• /
• pp.440-444
• /
• 2016

Titanium oxide ($TiO_2$) thin films were synthesized on polymer insulator and Si substrates by atomic layer deposition (ALD) method. The surface and electrical properties of $TiO_2$ films synthesized at various ALD cycle numbers were investigated. The synthesized $TiO_2$ films exhibited higher contact angle and smooth surface. The contact angle of $TiO_2$ films was increased with the increase of ALD-cycle number. Also, the rms surface roughness of films was slightly rough with the increase of ALD-cycle number. The leakage current on $TiO_2$ film surface synthesized at various conditions were uniformed, and the values were decreased with the increase of ALD-cycle number. In the results, the performance of $TiO_2$ films for self-cleaning critically depended on a number of ALD-cycle.

• 한국컴퓨터산업학회논문지
• /
• 제3권7호
• /
• pp.837-844
• /
• 2002

소프트웨어 개발 과정에서 시스템 내에 잔존하는 결함을 발견하거나 수정하기 위해 테스트를 실시한다. 테스트 단계에서 결함을 발견하고 소프트웨어 신뢰성을 평가할 수 있다. 수리적으로 신뢰성을 평가할 수 있는 모델이 소프트웨어 신뢰도 성장 모델이다. 이 모델의 대부분은 결함의 형태가 하나이고 결함율은 일정하다라는 가정에서 진행되고 있다. 본 연구에서는 테스트 단계에서 발견되는 결함이 일정하지 않다라는 관점에서 새로운 모델을 제안하고 결함 데이터를 적용해보았다. 또한 기존의 모델과 비교 및 분석하여 타당성을 증명하였다.

• 한국생활과학회지
• /
• 제11권3호
• /
• pp.287-299
• /
• 2002

Post-modernism exists with different shapes in overall cultural phenomena. Among the creative methods of composing post-modernism, there are representation, parody, plural coding, trans avant-garde etc. Summing up the influence of creative method of post-modernism on modem fashion led to the following results. 1. The phenomenon appears that value and valuelessness are easily reversed, and things with historical and traditional meanings are being ignored. 2. The boundary between higher culture and public culture is being disorganized, and mixed imitation phenomenon ignoring the differences between male and female is emerging 3. The mental and historial aspects in fashion pattern are highly thought of and the trend to understand human body from the various angles emerges. 4. In the consumer-oriented society, it appears in the form of meanings to achieve the self-achievement in individual life, to express one's idea and desire in the esthetical point of views. 5. It shows that through arranging the striking things and the distorted things, it takes the compromised method of re-appreciating the existing ideas. The phenomena in the post-modernism occurring in fashion design forced the concept of the uniformed existing fashion to be changed, creating a various fashions. That can just be called the dehumanization trend in the era of post-modernism, which is the most important formative feature in modern fashion.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2006년도 전력전자학술대회 논문집
• /
• pp.470-474
• /
• 2006

This dissertation discuses about a ferrite core plasma source using low operating frequency without sputtering problem by the stored electric field. Compared with the conventional RF power system with 13.56MHz switching frequency, the proposed plasma power system is only separated at 400kHz, so that it makes possible to use of low cost switching elements, PWM control and soft switching. Moreover, it could improve the coupling efficiency for plasma and antenna by using the ferrite core in order to transfer the energy of the load This dissertation tried to analyze new plasma generation method for the plasma generation system by modeling the plasma load and grafting the concept of impedance matching in order to interpret it with the formula This dissertation verified the ferrite core inductive coupling plasma source authorized for 400kHz of low frequency power by applying to the semi-conductor ash process thru the measurement of ash capacity and uniformed plasma distribution on the actual wafer.

• 한국통신학회논문지
• /
• 제27권11C호
• /
• pp.1132-1138
• /
• 2002

본 논문은 시간 제약 조건하에서의 최적 선택 공급 전압을 위한 전력 감소 스케줄링 알고리듬을 제안한다. 전력감소 스케줄링에서는 전력소비를 줄이기 위해 가변 전압 레벨을 이용해 최적 공급 전압을 선택 휴리스틱 방법으로 연산을 수행하여 제어 스텝을 결정한다. 그리고 최적 선택 공급 전압 바인딩에서는 그래프 컬러링 기법을 이용해 레지스터 상의 전력 소비의 주원인인 스위칭 활동을 최소화한다. 상위 수준 벤치마크 예제를 이용한 실험으로부터 우리는 최적 선택 공급 전압을 이용한 제안한 알고리듬이 획일화된 단일 전압을 이용한 알고리듬보다 전력 소비를 줄이는데 효율적임을 보인다.

• 한국환경복원기술학회지
• /
• 제3권4호
• /
• pp.1-10
• /
• 2000

This study aims at the new design system development of landscape architecture structures, as soundproof wall using reinforced soil block. This structures, that is new soundproof wall system, have to be maintained stability on acting critical wind load, which is combined exist soundproof wall system and soundproof wall system using environmental green stone block. To the harmony of this system, the post block, so-called landscape block or cast block, is manufactured. It's possible to stand of the post bearing system combined with post-pile and post block. Through the comparison with a serious code for the acting wind load on the soundproof wall, the reasonable wind load could be calculated. Also, the mechanical stability on the green stone block was checked by the Lab. tests based on the UBC (Uniformed Building Code). Because the critical height of soundproof wall system using green stone generally was restricted, the new system demands to combination of the exist system and the new system. For the stability analysis of them, the utility program, SAP2000, was used. And, a semi-auto program on the design system of the new soundproof wall using green stone was developed, which can be easily use because of the simplification.

• 디지털융복합연구
• /
• 제12권11호
• /
• pp.281-288
• /
• 2014

본 논문에서는 복잡한 영상에서의 윤곽선 검출을 기존의 방법보다 더 명확하고 효율적으로 나타내기 위해서 K-means 군집화를 이용하였다. 제안하는 방법에는 세 가지 단계를 거친다. 첫 번째는 명암분포를 균일하게 하기 위하여 히스토그램 평활화를 사용한다. 두 번째는 거리에 기반을 둔 클러스터링 기법으로 기준점에서 가까운 곳의 데이터들을 하나의 군집으로 묶는 K-means 군집화를 사용하고 마지막으로 에지검출의 가장 대표적인 1차 미분 연산자인 소벨 마스크를 사용하여 윤곽선을 검출한다. 따라서 기존에 있던 윤곽선 검출보다 더 나은 결과로 명확하게 윤곽선을 검출 할 수 있음을 보인다.

• 한국재료학회지
• /
• 제17권4호
• /
• pp.192-197
• /
• 2007

The effects of immersion time in the liquid nitrogen on the behavior of aluminum alloys used for the hydrogen storage tank of auto-mobile at cryogenic temperature were investigated. With increasing immersion time in the liquid nitrogen, the elongation of AI 5083 alloy at cryogenic temperature decreased because of non-uniform fracture of precipitates on the grain boundary, and the serration also occurred because of discontinuous slip due to rapid decreasing of the specific heat. The mechanical properties of AI 6061 alloy at cryogenic temperature were characterized by uniformed yield strength, tensile strength and elongation regardless of the immersion time in the liquid nitrogen. These mechanical properties of aluminum alloys at cryogenic temperature were interpreted by the strength of grain boundary and the slip deformation behavior.