• 제목/요약/키워드: Uniform quality

검색결과 833건 처리시간 0.026초

Characteristics of $Al_2O_3/TiO_2$ multi-layers as moisture permeation barriers deposited on PES substrates using ECR-ALD

  • 권태석;문연건;김웅선;문대용;김경택;박종완
    • 한국진공학회:학술대회논문집
    • /
    • 한국진공학회 2009년도 제38회 동계학술대회 초록집
    • /
    • pp.457-457
    • /
    • 2010
  • Flexible organic light emitting diodes (F-OLEDs) requires excellent moisture permeation barriers to minimize the degradation of the F-OLEDs device. Specifically, F-OLEDs device need a barrier layer that transmits less than $10^{-6}g/m^2/day$ of water and $10^{-5}g/m^2/day$ of oxygen. To increase the life time of F-OLEDs, therefore, it is indispensable to protect the organic materials from water and oxygen. Severe groups have reported on multi-layerd barriers consisting inorganic thin films deposited by plasma enhenced chemical deposition (PECVD) or sputtering. However, it is difficult to control the formation of granular-type morphology and microscopic pinholes in PECVD and sputtering. On the contrary, atomic layer deoposition (ALD) is free of pinhole, highly uniform, conformal films and show good step coverage. Thus, $Al_2O_3/TiO_2$ multi-layer was deposited onto the polyethersulfon (PES) substrate by electron cyclotron resonance atomic layer deposition (ECR-ALD), and the water vapor transmission rates (WVTR) were measured. WVTR of moisture permeation barriers is dependent upon density of films and initial state of polymer surface. A significant reduction of WVTR was achieved by increasing density of films and by applying low plasma induced interlayer on the PES substrate. In order to minimize damage of polymer surface, a 10 nm thick $TiO_2$ was deposited on PES prior to a $Al_2O_3$ ECR-ALD process. High quality barriers were developed from $Al_2O_3$ barriers on the $TiO_2$ interlayer. WVTR of $Al_2O_3$ by introducing $TiO_2$ interlayer was recorded in the range of $10^{-3}g/m^2.day$ at $38^{\circ}C$ and 100% relative humidity using a MOCON instrument. The WVTR was two orders of magnitude smaller than $Al_2O_3$ barriers directly grown on PES substrate without the $TiO_2$ interlayer. Thus, we can consider that the $Al_2O_3/TiO_2$ multi-layer passivation can be one of the most suitable F-OLEDs passivation films.

  • PDF

고구마 정단분열조직 유래 식물체의 기내 증식에 미치는 배양조건의 영향 (Effects of Cultural Conditions on the In Vitro Propagation of Plantlets derived from Apical Meristem in Ipomoea batatas L.)

  • 은종선;박종숙;김영선
    • Journal of Plant Biotechnology
    • /
    • 제29권1호
    • /
    • pp.37-40
    • /
    • 2002
  • 고구마 품종 '율미'의 정단분열조직을 배양하여 얻은 무병주를 대량증식하여 농가에 보급할 수 있는 고품질 종묘의 생산체계를 확립하기 위해 외마디배양 시 기내증식에 미치는 효과적인 pH 농도, 당의 함량 및 마디의 위치에 따른 생장반응을 조사하였다. 고구마 마디배양에 있어서 pH범위는 비교적 넓은 것으로 보이지만, 유식물체의 생육에 가장 효과적인 pH는 4.8로 나타났다. 당의 함량이 6∼8%인 배지에서 식물체의 초장, 근장, 마디수, 엽면적, 생체중 및 건물중 등 생장반응이 가장 양호하였고 당의 함량이 6∼8%보다 낮거나 높으면 비례적인 감소를 보였다. 정단분열조직을 포함하는 마디의 생장반응만이 다른 마디를 배양한 결과보다 양호하였고 그 외의 마디 배양간에는 큰 차이가 없었으므로 대량생산의 경우 경정조직을 포함한 마디를 제외하고 배양하면 균일한 묘를 동시에 대량으로 확보할 수 있었다. 결론적으로 고구마 외마디 배양을 통한 기내증식에 있어서 배지의 pH 농도는 4.8, sugar 함량은 6∼8%에서 가장 효과적이었고, 마디위치에 따른 배양에서는 생장점을 포함한 첫 번째 마디의 생육이 가장 우수하였으며, 그 외의 마디간에 생장반응은 큰 차이가 없었다.

Stage specific transcriptome analysis of liver tissue from a crossbred Korean Native Pig (KNP × Yorkshire)

  • Kumar, Himansu;Srikanth, Krishnamoorthy;Park, Woncheol;Lee, Kyung-Tai;Choi, Bong-Hwan;Kim, Jun-Mo;Lim, Dajeong;Park, Jong-Eun
    • Journal of Biomedical and Translational Research
    • /
    • 제19권4호
    • /
    • pp.116-124
    • /
    • 2018
  • Korean Native Pig (KNP) has a uniform black coat color, excellent meat quality, white colored fat, solid fat structure and good marbling. However, its growth performance is low, while the western origin Yorkshire pig has high growth performance. To take advantage of the unique performance of the two pig breeds, we raised crossbreeds (KNP ${\times}$ Yorkshire to make use of the heterotic effect. We then analyzed the liver transcriptome as it plays an important role in fat metabolism. We sampled at two stages: 10 weeks and at 26 weeks. The stages were chosen to correspond to the change in feeding system. A total of 16 pigs (8 from each stage) were sampled and RNA sequencing was performed. The reads were mapped to the reference genome and differential expression analysis was performed with edgeR package. A total of 324 genes were found to be significantly differentially expressed (${\left|log2FC\right|}$ > 1 & q < 0.01), out of which 180 genes were up-regulated and 144 genes were down-regulated. Principal Component Analysis (PCA) showed that the samples clustered according to stages. Functional annotation of significant DEGs (differentially expressed genes) showed that GO terms such as DNA replication, cell division, protein phosphorylation, regulation of signal transduction by p53 class mediator, ribosome, focal adhesion, DNA helicase activity, protein kinase activity etc. were enriched. KEGG pathway analysis showed that the DEGs functioned in cell cycle, Ras signaling pathway, p53 signaling pathway, MAPK signaling pathway etc. Twenty-nine transcripts were also part of the DEGs, these were predominantly Cys2His2-like fold group (C2H2) family of zinc fingers. A protein-protein interaction (PPI) network analysis showed that there were three highly interconnected clusters, suggesting an enrichment of genes with similar biological function. This study presents the first report of liver tissue specific gene regulation in a cross-bred Korean pig.

상품성 제고를 위한 고구마 수확 후 관리 및 출하기술 (Postharvest Handling and Marketing Management for Making High Salability of Sweetpotatoes)

  • Jeong, Byeong-Choon
    • 한국식품저장유통학회:학술대회논문집
    • /
    • 한국식품저장유통학회 2001년도 임시총회 및 제18차 학술발표회 발표논문초록집
    • /
    • pp.51-64
    • /
    • 2001
  • The qualities including taste of sweetpotato stored during the winter which can display in the spring market in Korea are affected by availability of storage for the roots. In order to make high storage availability of sweetpotato, the postharvest handlings should be done thoroughly from the moment of harvest until shipping them to the market. A lot of procedures that must be handled carefully for improving postharvest management are as follows; digging, trimming, gathering, putting in storage containers, carrying them from field to house, curing, storing, washing, drying, selecting marketable roots, packing and shipping to the market, etc.. Sweetpotatoes have a high moisture content, and a relatively thin and delicate skin, and are sensitive to chilling, so careless postharvest handling can lead to both quantitative and qualitative losses which may be extremely high in some circumstances. From now on research has concentrated on the improvement of postharvest conditions to increase yield and lower disease rates. Storage, which makes sweetpotatoes available through out the year, benefits both the producer and the consumer. Seven very important points must be needed in order to get the best quality marketable roots in the storing of sweetpotatos : $\circled1$The storage house must be clean and sanitary, $\circled2$The crop must be harvested before the first frost to avoid low-temperature injury, $\circled3$Particular care must be taken to avoid cutting, bruising, or other injuries of the sweetpotatoes during digging, picking up, grading, placing in containers, and moving to the storage house, $\circled4$Select sound, disease-free roots for storage $\circled5$Sweetpotatoes should be stored in properly stacked containers $\circled6$Cure immediately after harvest, preferably at 32∼33$^{\circ}C$ and 90 to 95 percent relative humidity for 4 to 7 days, After curing the temperature should be reduced to 13$^{\circ}C$ to 16$^{\circ}C$ by ventilating the storage with outside air. $\circled7$Store at 12$^{\circ}C$ to 14$^{\circ}C$ and a relative humidity of 80 to 85 percent. Storage houses should be located on suitable sites and should be tightly constructed and insulated so that temperature and humidity will be uniform. Sweetpotatoes are usually not washed and graded, and lately sometimes washed, graded, waxed, before being shipped to market. Consumer packaging of sweetpotatoes in paper boxes(10-15kg) or film bags is done mainly to aid marketing. The shelf life of washed roots in consumer packs in only 1 to 2 weeks. Weight loss of roots during marketing is much less in perforated film bags than in mesh and paper bags. Perforation of 0.8 to 1kg polyethylene bags with about six 6mm holes is essential ; to lower the internal relative humidity and avoid excessive sprouting, rooting, and dampness. Development and use of better postharvest handling with good storage facilities or marketing methods can minimize sweetpotate losses and has an effect of indirectly increasing productivity and farmer’s income.

빅데이터 분석 방법론을 활용한 지방자치단체 단위과제 운영 지원도구 개발 연구 (Research on Development of Support Tools for Local Government Business Transaction Operation Using Big Data Analysis Methodology)

  • 김다빈;이은정;류한조
    • 기록학연구
    • /
    • 제70호
    • /
    • pp.85-117
    • /
    • 2021
  • 이 연구의 목적은 지방자치단체에서 사용하고 있는 단위과제 현황, 단위과제 운영 및 기록관리 관점의 문제점을 조사 및 분석하여 그 과정에서 도출된 시사점들을 기반으로 텍스트 기반 빅데이터 기술을 활용하여 문제점에 대한 개선방안을 제시하는 것이다. 지방자치단체는 단위과제의 오분류로 인한 보존기간 책정 오류, 과공통사무와 기관공통사무의 유형식별 불가, 단위과제의 과대·과소·중복생성의 오류, 단위과제 명칭의 오류, 참고 가능한 표준의 부재, 통제 가능한 시스템 또는 도구의 부재 등으로 인해 기록관리 운영상 심각한 상태에 놓여 있다. 그러나 단위과제의 수가 약 72만개로 지나치게 많은 수량 때문에 효과적으로 통제할 수 없는 실정이며, 따라서 엄밀하고 통제할 수 있는 도구 및 표준이 필요하다. 본 연구에서는 이와 같은 문제점을 해결하기 위하여 빅데이터 분석 기술 중 텍스트기반 분석 도구인 코퍼스와 토큰화 기술을 적용한 시스템을 개발하고, 이를 기록관리기준표를 구성하고 있는 명칭 및 구성용어에 적용하였다. 이러한 단위과제 운영 지원도구는 통일성 있는 보존 기간 책정, 위임사무 기록물 식별, 중복·유사단위과제 생성 통제, 공통 과제의 표준적인 운영 등을 지원할 수 있는 도구가 될 수 있어 기록관리 업무에 상당한 기여를 할 수 있을 것으로 예상된다. 따라서 향후 빅데이터 분석 방법론을 활용한 지원도구가 BRM 및 RMS 등과 연계할 수 있다면 기록관리기준표 관리 업무의 품질이 높아질 수 있을 것으로 보인다.

단일조사 whole spine Lateral 검사에서 3D 프린터로 제작한 구리 필터 유용성 연구 (A Study on the Usefulness of Copper Filter in Single X-ray Whole Spine Lateral using 3D Printer)

  • 권경태;윤다연;신래운;한봉주;윤명성
    • 한국방사선학회논문지
    • /
    • 제14권7호
    • /
    • pp.899-906
    • /
    • 2020
  • WSS 측면 검사는 척추의 질환을 진단하기 위해 매우 중요한 검사이다. 최근 대면적의 Long Length Detector가 보급되고 있어 피폭선량과 검사 시간을 효율적으로 줄일 수 있으며, 낙상 고위험군 환자 및 소아, 청소년기 환자의 검사에 매우 효율적으로 적용할 수 있다. 하지만 1회 조사로 영상을 얻기 때문에 기하학적인 척추의 해부학적 구조상 허리뼈 보다 목뼈 부근이 상대적으로 체적이 적어 목뼈 부위의 영상 품질은 진단 가치가 매우 하락한다는 단점이 있다. 이에 본 연구는 WSS 측면 검사에서 균일한 영상품질을 얻기 위해 3D 프린팅 기술과 구리 필라멘트를 이용하여 부가 필터를 제작하고 결과를 분석하고자 한다. 3D 프린팅 기술은 원하는 모양을 손쉽게 출력할 수 있는 장점이 있어 산업 분야 전반에 광범위하게 사용되고 있으며, 최근 구리 소재의 필라멘트가 개발되어 부가 필터로서의 가능성을 확인하였다. WSS 측면 검사에서 부가 필터 적용시 CNR과 SNR이 우수하게 측정되어 부가필터의 사용 가능성을 확인 하였다.

페놀수지 및 에틸렌 글리콜을 첨가한 유리질 카본 코팅층의 물성 제어 (Morphology control of glassy carbon coating layer to additive ethylene glycol and phenolic resin)

  • 주상현;주영준;이혁준;심영진;박동진;조광연
    • 한국결정성장학회지
    • /
    • 제32권3호
    • /
    • pp.89-95
    • /
    • 2022
  • 본 연구에서는 페놀수지를 사용하여 흑연표면에 유리질 카본 코팅을 진행하였다. 코팅액은 균일한 표면을 가지는 유리질 카본 코팅층 형성을 위해 페놀수지와 경화제, 희석제, 첨가제 등을 혼합하였다. 코팅된 페놀수지는 25~60℃에서 건조 100~200℃에서 경화 500~1,500℃에서 열처리하여 유리질 카본으로 전환하였다. 유리질 카본의 특성 분석을 위해 FTIR, XRD, SEM 분석, 밀도/기공율/접촉각 측정을 진행하였다. 유리질 카본 형성에 있어 최적 온도는 약 1,000℃로 확인되었다. 그리고 첨가제의 함량이 높아질수록 코팅 표면의 결함감소, 기공율 감소, 접촉각 증가, 밀도 증가 등의 효과를 보였다. 첨가제를 통한 유리질 카본 코팅층 형성 방법은 흑연 코팅 및 다른 분야에 적용이 가능할 것으로 기대된다.

동남아 수출을 위한 느타리류 완성형배지의 최적 조건 및 운송 온도 (Selection of optimum conditions and distribution temperature of complete substrates of Pleurotus species for export to Southeast Asia)

  • 오민지;임지훈;오연이;장갑열;김민식;강현민
    • 한국버섯학회지
    • /
    • 제20권4호
    • /
    • pp.258-262
    • /
    • 2022
  • 동남아 지역에서 한국산 버섯에 대한 선호도가 높기 때문에 신선버섯 형태가 아닌 현지에서 바로 생육하여 유통 할 수 있는 완성형배지 형태의 수출을 확대하고자 안전한 유통조건을 선발하였다. 일반느타리(Pleurotus ostreatus) '솔타리' 품종과 여름 느타리(P. sajor-caju) '삼복' 품종으로 1 kg 완성형배지를 제조하여 배양정도와 저장온도에 따라 10일 간 저장 후 버섯을 생육하였다. 70% 배양된 배지를 5~10℃에서 저장한 경우, 생육일수가 빨랐고 버섯 발생이 균일하고 안정적이었다. 0℃와 15℃로 설정된 컨테이너를 이용하여 베트남으로 실제 수출하여 달랏 지역에서 재배한 결과, 높은 온도에서 운송된 경우 생육일수가 1~2일 단축되었고, '솔타리'의 경우 수확량이 약 10% 증수되었다. 또한, '삼복'의 경우 수확량은 비슷하였으나 자실체 품질이 매우 우수하여 상품성이 좋았다.

7T MRI에서 일반적으로 신호 감도가 낮은 영역에 대한 고유전율 패드 개선 (Improvement of High Permittivity Pads for Areas with Generally Low Signal Sensitivity at 7T MRI)

  • 김용태;백현만
    • 한국방사선학회논문지
    • /
    • 제16권6호
    • /
    • pp.761-769
    • /
    • 2022
  • 고유전 재료를 사용한 패드는 임상 MRI 연구에서 RF 펄스의 필드 감도와 균질성을 국부적으로 개선하기 위해 다양한 응용 분야에서 사용되었다. 본 연구에서는 실제 임상 영상의 적용과 관련된 실질적인 문제를 고려하여 패드를 개선하는 것을 목표로 하였다. 감쇠된 B1 필드 강도를 증가시키기 위한 고유전율 패드를 제작하고 7T MRI에서 테스트했다. Sim4Life 시뮬레이션 및 실험 결과는 B1 근거리장에서 더 강하고 상대적으로 균일함을 보여준다. 민감도가 낮은 영역으로 알려진 전체 소뇌의 영상 품질을 향상시키기 위해 패드의 기계적 변화를 줄이는 가이드를 만들었다. 또한 착용감을 향상시키기 위해 패드를 상하로 나누어 디자인하였다. 안면 패드는 비강 내 비갑개와 같은 부위에서 전반적인 신호 증가 효과를 보였다. 전두엽, 눈 등의 영역에서 신호 증가가 예상됐지만 효과가 미미하거나 영상 프로토콜에서 효과를 보기 어려웠다. 결론적으로, 본 논문은 그 효과를 유지하면서 개선된 비강 신호를 갖는 소뇌 최적화 패드를 보여주었다.