• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2016년도 제50회 동계 정기학술대회 초록집
• /
• pp.427-427
• /
• 2016

Organic-inorganic hybrid perovskite have attracted significant attention as a new revolutionary light absorber for photovoltaic device due to its remarkable characteristics such as long charge diffusion lengths (100-1000nm), low recombination rate, and high extinction coefficient. Recently, power conversion efficiency of perovskite solar cell is above 20% that is approached to crystalline silicon solar cells. Planar heterojunction perovskite solar cells have simple device structure and can be fabricated low temperature process due to absence of mesoporous scaffold that should be annealed over 500 oC. However, in the planar structure, controlling perovskite film qualities such as crystallinity and coverage is important for high performances. Those controlling methods in one-step deposition have been reported such as adding additive, solvent-engineering, using anti-solvent, for pin-hole free perovskite layer to reduce shunting paths connecting between electron transport layer and hole transport layer. Here, we studied the effect of alkali metal halide to control the fabrication process of perovskite film. During the morphology determination step, alkali metal halides can affect film morphologies by intercalating with PbI2 layer and reducing $CH3NH3PbI3{\cdot}DMF$ intermediate phase resulting in needle shape morphology. As types of alkali metal ions, the diverse grain sizes of film were observed due to different crystallization rate depending on the size of alkali metal ions. The pin-hole free perovskite film was obtained with this method, and the resulting perovskite solar cells showed higher performance as > 10% of power conversion efficiency in large size perovskite solar cell as $5{\times}5cm$. X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), and inductively coupled plasma optical emission spectrometry (ICP-OES) are analyzed to prove the mechanism of perovskite film formation with alkali metal halides.

• Smart Structures and Systems
• /
• 제20권3호
• /
• pp.369-383
• /
• 2017

In this work, the effects of moisture and temperature on free vibration characteristics of functionally graded (FG) nanobeams resting on elastic foundation is studied by proposing a novel simple trigonometric shear deformation theory. The main advantage of this theory is that, in addition to including the shear deformation influence, the displacement field is modeled with only 2 unknowns as the case of the classical beam theory (CBT) and which is even less than the Timoshenko beam theory (TBT). Three types of environmental condition namely uniform, linear, and sinusoidal hygrothermal loading are studied. Material properties of FG beams are assumed to vary according to a power law distribution of the volume fraction of the constituents. Equations of motion are derived from Hamilton's principle. Numerical examples are presented to show the validity and accuracy of present shear deformation theories. The effects of hygro-thermal environments, power law index, nonlocality and elastic foundation on the free vibration responses of FG beams under hygro-thermal effect are investigated.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2009년도 하계학술대회 논문집
• /
• pp.192-192
• /
• 2009

We have successfully demonstrated the inkjet printing process to fabricate $Al_2O_3$ thick films without a high temperature sintering process. A single solvent system had a coffee ring pattern after printing of $Al_2O_3$ dot, line and area. In order to fabricate the smooth surface of $Al_2O_3$ thick film, we have introduced a co-solvent system which has nano-sized $Al_2O_3$ powders in the mixture of Ethylene glycol monomethyl ester and Di propylene glycol methyl ether. This co-solvent system approached a uniform and dense deposition of $Al_2O_3$ powders on the substrate. The packing density of inkjet-printed $Al_2O_3$ films is more than 70% which is very high compared to the value obtained from the films synthesized by other conventional methods such as casting processes. The characterization of the inkjet-printed $Al_2O_3$ films has been implemented to investigate its thickness and roughness. Also the dielectric loss of the films has been measured to understand the feasibility of its application to 3D integration package substrate.

• Applied Biological Chemistry
• /
• 제27권2호
• /
• pp.112-118
• /
• 1984

설탕 가수분해효소인 invertase를 칼슘 알지네이트젤에 고정화시켰다. 고정화된 입자는 균일한 크기와 모양을 가졌으며 컬럼 충진에 사용 할수 있는 좋은 기계적 강도를 보였다. 최적 효소 활성을 얻기 위하여 알지네이트 젤의 농도, 염화칼슘의 농도, 그리고 염화칼슘 입자의 반응 시간에 따른 영향 등을 조사하였다. 그 결과 2% 알지네이트 젤을 0.2M 염화 칼슘에 2시간 반응시켰을 때 가장 좋은 활성을 보였으며 이해 68%의 효소 수율을 나타냈다. 최적화된 조건에 의해 제조한 고정화 효소는 143mM의 km, 최적 pH는 4.5를 보였으며 $55^{\circ}C$에서 높은 효소 활성 및 열 안정성을 보였다. 젤의 효소 허용 부하량은 20ml 당 150mg이었고 6일동안 컬럼을 통한 설탕의 연속 가수분해에서는 효소 활성에 어떤 감소도 보이지 않았다.

• 천문학회지
• /
• 제43권2호
• /
• pp.25-39
• /
• 2010

We perform kinetic simulations of diffusive shock acceleration (DSA) in Type Ia supernova remnants (SNRs) expanding into a uniform interstellar medium (ISM). Bohm-like diffusion due to self-excited $Alfv\acute{e}n$ waves is assumed, and simple models for $Alfv\acute{e}nic$ drift and dissipation are adopted. Phenomenological models for thermal leakage injection are considered as well. We find that the preshock gas temperature is the primary parameter that governs the cosmic ray (CR) acceleration efficiency and energy spectrum, while the CR injection rate is a secondary parameter. For SNRs in the warm ISM of $T_0\lesssim10^5K$, if the injection fraction is $\xi\gtrsim10^{-4}K$, the DSA is efficient enough to convert more than 20% of the SN explosion energy into CRs and the accelerated CR spectrum exhibits a concave curvature flattening to $E^{-1.6}$, which is characteristic of CR modified shocks. Such a flat source spectrum near the knee energy, however, may not be reconciled with the CR spectrum observed at Earth. On the other hand, SNRs in the hot ISM of$T_{0}\approx10^{6}K$ with a small injection fraction, $\xi$<$10^{-4}$, are inefficient accelerators with less than 10% of the explosion energy getting converted to CRs. Also the shock structure is almost test-particle like and the ensuing CR spectrum can be steeper than $E^{-2}$. With amplified magnetic field strength of order of $30{\mu}G$ $Alfv\acute{e}n$ waves generated by the streaming instability may drift upstream fast enough to make the modified test-particle power-law as steep as $E^{-2.3}$, which is more consistent with the observed CR spectrum.

• 한국전자통신학회논문지
• /
• 제9권3호
• /
• pp.279-284
• /
• 2014

본 논문에서는 p-채널 저온 다결정 실리콘 박막 트랜지스터의 문턱전압 변동을 보상할 수 있는 새로운 OLED 화소회로를 제안하였다. 제안한 5-TFT OLED 화소회로는 4개의 스위칭 박막 트랜지스터, 1개의 OLED 구동 박막 트랜지스터 및 1개의 정전용량으로 구성되어 있다. 제안한 화소회로의 한 프레임은 초기화 구간, 문턱전압 감지 및 데이터 기입 구간, 데이터 유지 구간 및 발광 구간으로 나누어진다. SmartSpice 시뮬레이션 결과, 구동 트랜지스터의 문턱전압이 ${\pm}0.25V$ 변동 시 최대 OLED 전류의 오차율은 -4.06%이였고 구동 트랜지스터의 문턱전압이 ${\pm}0.50V$ 변동 시 최대 OLED 전류의 오차율은 9.74%였다. 따라서 제안한 5T1C 화소회로는 p-채널 다결정 실리콘 박막 트랜지스터의 문턱전압 변동에 둔감하여 균일한 OLED 전류를 공급함을 확인하였다.

• 한국결정성장학회지
• /
• 제12권5호
• /
• pp.229-233
• /
• 2002

유기화학적 방법인 착체중합법을 이용하여 나노사이즈의 ZnO 분말을 저온에서 합성하였다. 고분자 전구체는 Zn nitrate hexahydrate를 사용하였고, chelating agent로서 citric acid를 reaction medium으로서 ethylene glycol을 혼합하여 제조하였다. 고분자 전구체를 300~$700^{\circ}C$의 온도범위에서 3시간 동안 하소하였으며, 열분해와 결정화 과정을 TG-DTA, FI-IR과 XRD 등을 이용하여 분석하였다. 결정화 온도에 따른 입자의 형상이나 크기를 SEM, TEM의 분석 및 Scherrer's equation을 이용한 계산을 통하여 관찰 및 비교를 하였다. ZnO의 결정화는 $300^{\circ}C$부터 시작되었고, $400^{\circ}C$에서 완전히 합성되었음을 알 수 있었다. 400~$700^{\circ}C$에서 하소된 ZnO 입자들은 대부분 둥근 형태로 균일하게 분포되었으며, $400^{\circ}C$에서 하소된 분말의 평균입도는 약 30~40nm를 보였다. 일반적으로 온도의 상승에 따라 입경이 증가되는 일반적인 경향이 관찰되었다.

• 한국수소및신에너지학회논문집
• /
• 제21권6호
• /
• pp.500-506
• /
• 2010

The metal monolith catalyst coated with 15wt% Ni/$MgAl_2O_4$ is applied to the natural gas steam reforming for hydrogen production. To address the improvement of adherence between metal monolith and catalyst coating layer, the pre-calcination temperature as well as the coating conditions of $Al_2O_3$ sol are optimized. When the Fe-Cr alloy monolith is pre-calcined at $900^{\circ}C$ for 6 h, $Al_2O_3$ layer was formed uniformly on the entire surface of the metal substrate. It is seen that the formation of $Al_2O_3$ layer on the monolith surface is essential for the uniform coating of $Al_2O_3$ sol onto the monolith substrate. The monolith catalyst coated with 10wt% $Al_2O_3$ sol shows high $CH_4$ conversion and good thermal stability as compared with the monolith catalyst without $Al_2O_3$ sol coating under severe reaction conditions with high GHSV of 30,000 $h^{-1}$ at $700^{\circ}C$. In addition, the metal monolith catalyst shows higher catalytic activity and better thermal conductivity than 15wt% Ni/$MgAl_2O_4$ pellet catalyst.

• 한국수소및신에너지학회논문집
• /
• 제20권3호
• /
• pp.208-215
• /
• 2009

PEMFC stack power output is needed to be around 100 kW to meet the requirements of automotive application and scaling-up the active area of the stack cells will allow a higher power. In the case of scaling-up the active area of cells, it is difficult to obtain uniform in-plane internal conditions such as temperature, relative humidity and stoichiometry of the feed gas. These ununiformity with the location in the cell would affect both the performance and durability of the stack, so it is important to understand phenomena in the cell for improving them. In this study, the current density, electrochemical resistance and performance distribution measurement was performed to understand the ununiformity in a single cell using in-situ method; (1) Current Density Distribution (CDD) Device and (2) Segmented Cell Fixture. The influence of location of feed gas on the performance of a single cell was experimentally measured and discussed by using a segmented single cell which was composed of 8 compartments. The correlation between the location and performance in a single cell was discussed by these two tools and it was extended between the local characterization and the durability in a MEA by comparing the used cell with a fresh one. It was also studied in terms of electrochemistry by Electrochemical Impedance Spectroscopy.

• 대한핵의학회지
• /
• 제15권2호
• /
• pp.35-41
• /
• 1981

The radioimmunoassay of human thyrtropin was performed in various thyroid diseases, using the antin-h-TSH antibody (Daiichi, Japan) and purified h-TSH(Biodata, Italy). $^{125}I$ labelling of h-TSH was performed using a small amount $(1.8{\mu}g)$ of chloramin-T as an oxidant at room temperature. This new method facilitated uniform labelling and reduced to damage of h-TSH by chloramin-T, and satisfactory radioimmunoasasy results were obtained with $^{125}I-TSH$ prepared by the new method until at least 7 weeks after preparation, The assay sensitivity was $1.0{\mu}u/ml$. The coefficient of variances in within assay and interrun assay were all less than 10% among the range of $1.25{\mu}u/ml$ and $160{\mu}u/ml$. The serum TSH values by this new method were colsely related to those by commercial kit (r= 0.996).