• 한국정밀공학회지
• /
• 제16권7호
• /
• pp.178-187
• /
• 1999

In order to identify a transfer function model with noise, penalty function method has been widely used. In this method, estimation process for possible model parameters from low to higher order proceeds the model identification process. In this study, based on linear estimation method, a new approach unifying the estimation and the identification of ARMAX model is proposed. For the parameter estimation of a transfer function model with noise, linear estimation method by noise separation is suggested instead of nonlinear estimation method. The feasibility of the proposed model identification and estimation method is verified through simulations, namely by applying the method to time series model. In the case of time series model with noise, the proposed method successfully identifies the transfer function model with noise without going through model parameter identification process in advance. A new algorithm effectively achieving model identification and parameter estimation in unified frame has been proposed. This approach is different from the conventional method used for identification of ARMAX model which needs separate parameter estimation and model identification processes. The consistency and the accuracy of the proposed method has been verified through simulations.

• 한국패류학회지
• /
• 제27권4호
• /
• pp.345-351
• /
• 2011

Comparison of different morphological characteristics of bivalves is very useful for distinguishing species. Therefore, this study used a morphometric approach to document patterns of phenotypic change through the specimens of family Pinnidae inhabiting the bottom sediments at the coasts of An Thoi Archipelago (south-eastern Gulf of Thailand), in that way excluding intraspecific variations among different populations along a wide geographical range. It was revealed that individuals determined as Pinna trigonium separated from specimens of Pinna nigra and Atrina vexillum at high level, but P. nigra and A. vexillum were the single species A. vexillum, as it is assumed now. Also, it was found that both groups of P. trigonium individuals and A. vexillum specimens divided into tree subgroups unified the specimens with the similar morphometric parameters: small, medium and large within the populations, though there were no evident divisions into subgroups in the size distributions of the populations. In addition to the interspecific morphological variations, the species also showed significant intraspecific morphological variations even in the same population. Most probable reason for the appearance of the intraspecific morphological variations and division of all specimens into size-specific subgroups in the population is the fact that the growth of Pinnidae bivalves is not isometric.

• 한국멀티미디어학회논문지
• /
• 제6권4호
• /
• pp.676-684
• /
• 2003

eLearning can be defined as an approach to teaching and teaming that utilises Internet technologies to communicate and collaborate in an educational context. This includes technology that supplements traditional classroom training with web-based components and learning environments where the educational process is experienced online. The use of hypertext as an educational tool has a very rich history. The advent of the internet and one of its major application, the world wide web (WWW), has given a tremendous boost to the theory and practice of hypermedia systems for educational purposes. However, the web suffers from an inability to satisfy the heterogeneous needs of a large number of users. For example, web-based courses present the same static teaming material to students with widely differing knowledge of the subject. Adaptive hypermedia techniques can be used to improve the adaptability of eLearning. In this paper we report an approach to the design a unified implementation framework suitable for web-based eLearning that accommodates the three main dimensions of hypermedia adaptation: content, navigation, and presentation. The framework externalises the adaptation strategies using XML notation. The separation of the adaptation strategies from the source code of the eLearning software enables a system using the framework to quickly implement a variety of adaptation strategies. This work is a part of our more general ongoing work on the design of a framework for adaptive content delivery. parts of the framework discussed in this paper have been imulemented in a commercial eLearning engine.

• Steel and Composite Structures
• /
• 제4권4호
• /
• pp.281-301
• /
• 2004

The paper begins by presenting a unified variational approach to the lateral-torsional buckling (LTB) analysis of doubly symmetric prismatic and tapered thin-walled beams with open cross-sections, which accounts for the influence of the pre-buckling deflections. This approach (i) extends the kinematical assumptions usually adopted for prismatic beams, (ii) consistently uses shell membrane theory in general coordinates and (iii) adopts Trefftz's criterion to perform the bifurcation analysis. The proposed formulation is then applied to investigate the influence of the pre-buckling deflections on the LTB behaviour of prismatic and web-tapered I-section simply supported beams and cantilevers. After establishing an interesting analytical result, valid for prismatic members with shear centre loading, several elastic critical moments/loads are presented, discussed and, when possible, also compared with values reported in the literature. These numerical results, which are obtained by means of the Rayleigh-Ritz method, (i) highlight the qualitative differences existing between the LTB behaviours of simply supported beams and cantilevers and (ii) illustrate how the influence of the pre-buckling deflections on LTB is affected by a number of factors, namely ($ii_1$) the minor-to-major inertia ratio, ($ii_2$) the beam length, ($ii_3$) the location of the load point of application and ($ii_4$) the bending moment diagram shape.

• 한국음향학회지
• /
• 제23권8호
• /
• pp.590-596
• /
• 2004

본 논문에서는 한국어 연결 숫자음 인식을 위한 최대 사후 eigenvoice을 사용한 자기적응 기법을 제안한다. 제안된 최대 사후 eigenvoice 기법은 eigenvoice 계수에 대한 확률 밀도 함수를 가정함으로 구성된다. 제안된 알고리즘은 기존 eigenvoice 추정 과정에 선 분포 모델을 포함하는 일반적인 해를 제공하는 구조를 갖는다. 인식할 한 문장만을 사용하는 자기 적응 시스템을 위해 매우 강인한 특성을 갖는 최대 사후 eigenvoice 적응 기법을 사용하였다. 한국어 연결 숫자음에 대한 일련의 자기 적응 실험결과 제안된 알고리즘의 성능은 매우 적은 량의 적응 데이터에 대해 기존 eigenvoice 알고리즘에 비해 우수한 성능을 나타냈었다.

• 한국정보처리학회논문지
• /
• 제6권8호
• /
• pp.2072-2087
• /
• 1999

소프트웨어의 대형화와 사용자 요구사항의 복잡화에 따라, 소프트웨어 개발 초기 단계에서의 산출물의 정확성과 일관성은 중요해지고 있다. 하지만, 객체지향 방법을 기반으로 한 설계 문서에 대한 오류 검출 및 일관성 점검을 위한 기법은 만족할 만한 수준에 이르지 못하고 있다. 본 논문은 UML(Unified Modeling Language)의 다이어그램들에 대한 메타모델을 작성하고, 메타모델의 각 요소들에 대하여 적용할 일반화된 메타규칙을 도출하고, 메타규칙들을 각 다이어그램에 적용한 세부규칙 도출에 활용하였다. 이 방법은 오류 검출과 일관성 점검에 활용할 세부규칙들을 체계적으로 도출하므로, 규칙의 완전성을 도모하고 규칙적용의 자동화를 가능하게 하였다. 또한, 도출된 세부규칙을 적용한 사례를 통하여 그 효용성을 확인하였다.

• 한국통신학회논문지
• /
• 제33권9C호
• /
• pp.676-682
• /
• 2008

정보화시대에 진입하면서 디지털 콘텐츠 활용기술이 사회 각 분야에서 각광을 받고 있으며 이와 더불어 효율적인 콘텐츠 관리와 콘텐츠 저작권보호를 위한 관련 기술연구가 활발하게 이루어지고 있다. 그러나 기존 저작권보호를 위한 DRM기술은 단일 CMS 도메인을 기반으로 개발되고 콘텐츠 클로벌 활용이 제한되어 정보의 교류와 공유를 효율적으로 지원하지 못하는 단점이 있다. 이 논문에서는 CMS간 콘텐츠 상호운영이 가능한 계층적 통합 메타데이터를 기반으로 콘텐츠 저작권보호를 위한 DRM모델을 제안한다. 제안 모델은 동종 및 이종 CMS간 콘텐트들이 상호유통이 가능하고 또한 유통과정에서 발생되는 저작권문제를 해결하였다.

• 한국태양에너지학회 논문집
• /
• 제36권3호
• /
• pp.9-16
• /
• 2016

This paper discusses a refined model for investigating the micro-mechanical behavior of beam-like structures, which are composed of various elastic moduli and complex geometries varying through the cross-section directions and are also periodically-repeated and heterogeneous along the axial direction. Following the previous work (Lee and Yu, 2011), the original three-dimensional static problem is first formulated in a unified and compact form using the concept of decomposition of the rotation tensor. Taking advantage of the smallness of the cross-sectional dimension-to-length parameter and the micro-to-macro heterogeneity, while also performing homogenization along the dimensional reduction simultaneously, the variational asymptotic method is rigorously used to construct a total energy function, which is asymptotically correct up to the second order. Furthermore, through the transformation procedure based on the pure kinematic relations and the linearized equilibrium equations, a generalized Timoshenko model is systematically established. For the purpose of dealing with realistic and complex geometries and constituent materials at the microscopic level, this present approach is incorporated into a commercial analysis package. A few examples available in literature are used to demonstrate the consistency and efficiency of this proposed model, especially for the structures, in which the effects of transverse shear deformations are significant.

• 한국정보통신학회논문지
• /
• 제8권6호
• /
• pp.1218-1227
• /
• 2004

멀티-도메인 공학시스템은 전기, 기계, 유압, 열등의 도메인을 포함하며, 시스템 구성이 복잡하여 설계에 많은 어려움을 가지고 있다. 최적의 설계를 위해서는 각 도메인에 대한 통합된 설계 방법과 자동적이고 효율적인 탐색방법이 요구된다. 본 논문은 도메인에 독립적인 본드 그래프(bond graph)와 대규모 공간 해의 탐색에 접합한 진화 알고리즘의 일종인 Genetic Programming(유전 프로그래밍, GP)를 결합하여 멀티 도메인 동적 시스템에 대한 디자인 해를 자동적으로 생성해주는 설계 방법을 제시하였다. 제안된 설계방법의 효용성을 입증하기 위해서 고유값(eigenvalue) 설계 문제가 실험되었고, 서로 다른 태아모델을 가진 고유값의 집합이 사용되었다.

• 대한산업공학회지
• /
• 제28권4호
• /
• pp.407-414
• /
• 2002

The inherent reliability of a product is primarily determined in the design stage, and therefore, design engineers should be able to design reliability into the product in an efficient manner. Especially, the product should be designed such that its reliability is robust to various noise factors encountered in production and field environments. The Taguchi method can be effectively used for this purpose. However, there exist only a few attempts to integrate the Taguchi method with reliability design, and in addition, the existing works do not sufficiently consider the robustness and/or the distinction between noise and acceleration factors. This paper develops a unified approach to robust reliability design assuming that accelerated life tests are conducted at each combination of design and noise conditions. First, an experimental structure for assigning not only acceleration but also noise factors is presented. Second, the reliability at the use condition is estimated using the assumed accelerated life test model. Third, reliabilities are transformed into 'efforts' using an effort function which reflects the degree of difficulty involved in improving the reliability. Finally, an optimal setting of design parameters is determined based on the mean and standard deviation of the effort values. The above approach is illustrated with an example of a paper feeder design.