• 한국전기전자재료학회논문지
• /
• 제11권6호
• /
• pp.486-492
• /
• 1998

The amorphous Co-based magnetic films have a large saturation flux density, a low coercive force, and a zero magnetostriction constant. Therefore, they have been studied for application to magnetic recoding heads and micro magnetic devices. However, it was found that the magnetic anisotropy was changed for each film fabrication processes. In this study, we investigated how to control the anisotropy of sputtered amorphous $Co_{89}Nb{8.5}Zr{2.5}$ films. After deposition, the rotational field annealing ant the uniaxial field annealing were performed under the magnetic field of 1.5 kOe. the annealing was done at the temperature range from 400 to $600^{\circ}C$ for one hour. As-deposited amorphous $Co_{89}Nb{8.5}Zr{2.5}$ thin film had saturation magnetization ($4\piM_5$) of 0.8 T, coercive force($_IH_C$) of 1.5 Oe, and anisotropy field($H_k$) of 11 Oe. The amorphous $Co_{89}Nb{8.5}Zr{2.5}$ thin films annealed by rotational field annealing at $500^{\circ}C$ for one hour was found to be isotropy, and $4\piM_5$ of 0.9 T was obtained from these films, Also, the magnetic anisotropy of as-deposited films could be controlled by uniaxial field annealing at $400^{\circ}C$ for one hour. Anisotropy field($H_k$) of 17 Oe and $4\piM_5$ of 1.0 T were obtained by this method.

• 한국자기학회지
• /
• 제11권4호
• /
• pp.163-167
• /
• 2001

DC 마그네트론 스퍼터링법으로 증착된 700 $\AA$의 NiFe 박막을 박막 증착시 형성시킨 자화용이축에 수직한 자기장을 인가하여 열처리한 후 일축 이방성 자기장의 회전을 조사하였다. NiFe 박막은 열처리온도 160 $^{\circ}C$에서 자화용이축과 자화곤란축을 구분할 수 없는 등방적인 상태가 되었고, 열처리온도가 증가함에 따라 다시 일축 이방성을 갖는 상태가 되었다. 열처리 온도가 400 $^{\circ}C$ 이상인 경우에 급격한 보자력의 증가를 보였다. 열처리 온도가 400 $^{\circ}C$인 경우에 XRD 분석과 AES depth profile은 NiFe 박막 내에서 (111) 방향으로 결정성장이 활발히 일어나며 인접한 전극 Au와 상호화산 현상도 광범위하게 일어남을 보여주었다.

• Journal of Magnetics
• /
• 제10권4호
• /
• pp.133-136
• /
• 2005

The NiMn/NiFe bilayer structure which was short time annealed in order to induce unidirectional anisotropy were studied as a function of annealing temperature. The maximum exchange bias field of NiMn/NiFe bilayer was presented at $250^{\circ}C$ after short time annealing process with no external field. The appearance of exchange bias was due to phase transformation of NiMn layer. In plane angular dependence of a resonance field distribution which measured by FMR was analysed as a combined effect of unidirectional anisotropy and uniaxial anisotropy. The resonance field and the line width from FMR measurement were also analysed with annealing temperature.

• 한국자기학회지
• /
• 제12권2호
• /
• pp.46-50
• /
• 2002

110$\AA$ 두께의 Mumetal 박막을 자기장하에서 기판온도를 변화시키면서 제작하고, 고진공 분위기에서 자기장중 열처리를 수행하였다. 박막에 유도되는 자기이방성은 인가자기장 방향에서 30$^{\circ}$간격으로 180$^{\circ}$까지 자기이력곡선을 측정하여 조사하였다. 기판 온도가 증가할수록 용이축 방향의 보자력은 감소하였으나 일축이방성은 인가자기장 방향에서 벗어났다. 20$0^{\circ}C$에서 한 시간 동안 자기장중 열처리를 수행하면 기판온도에 상관없이 일축이방성이 향상되었다. 기판온도가 5$0^{\circ}C$ 이하일때 4.3 Oe의 이방성 자기장을 나타냈으며 기판온도가 증가할수록 이방성 자기장은 감소하였다. Mumetal 박막의 일축이방성은 열처리 전후 모두 5$0^{\circ}C$에서 가장 잘 유도되었다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1996년도 하계학술대회 논문집 A
• /
• pp.193-195
• /
• 1996

In amorphous transformer core, magnetic field annealing is required for inducing uniaxial magnetic anisotropy to circular direction of the core. Generally annealing temperature is about foot, so insulator using in solenoid bed must have a high temperature stability, mechanical strength and good machinability. In this study, we made the magnetic field annealing apparatus using insulators, conductors, connectors and power supply. And then tested the apparatus in annealing process of 50 kVA amorphous transformers.

• 한국자기학회:학술대회 개요집
• /
• 한국자기학회 2001년도 춘계연구발표회 논문개요집
• /
• pp.56-57
• /
• 2001

• 한국자기학회지
• /
• 제21권1호
• /
• pp.10-14
• /
• 2011

본 연구에서는 열처리에 따른 자기이방성 자기장 및 강자성 공명 선폭(${\Delta}H_{PP}$) 변화 특성을 분석하기 위하여 열처리 전후의 CoFeB/MgO 박막 재료에 대하여 강자성 공명 신호를 측정하였다. 열처리 전에 일축이방성 자기장($H_{K1}$) 특성을 보이던 CoFeB는 열처리 후 쌍축이방성 자기장 ($H_{K2}$) 특성이 부가적으로 확연히 나타났다. 이는 비정질 CoFeB가 열처리에 의하여 B이 확산되는 과정에서 박막의 수평면에서 (001)결정면을 갖는 MgO 계면으로부터 CoFeB 역시 (001)결정면을 갖는 입방결정으로 성장하였기 때문이다. 또한 쌍축이방성을 갖는 결정축의 영향으로 수평면에서의 자화용이축의 분포 특성을 증가시켜 ${\Delta}H_{PP}$도 증가하는 특성을 보인다.

• E2M - 전기 전자와 첨단 소재
• /
• 제8권4호
• /
• pp.443-450
• /
• 1995

A directional coupler which on the X-cut $LiNbO_3$ substrate is fabricated by using proton exchange method and self-aligned method. After proton exchange process, the waveguide is formed by annealing process. The relation ship between refractive index change of waveguide and maximum output was studied along with the annealing time. A self-aligned method was used to simplify the fabrication process of the waveguide and to maximize the efficiency of electric field. The on-off state of modulator has been observered with the switching of the directional coupler by the electric field effect and also the switching voltage of the directional coupler has been measured with 8.0 [V].

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1998년도 하계학술대회 논문집 D
• /
• pp.1498-1499
• /
• 1998

Thin film inductors of 10 mm ${\times}$ 10 mm with spiral pattern of 14 turns were fabricated by sputtering, photo-masking, and etching processes. Their impedence characteristics and annealing after effects were investigated. After magnetic annealing, the impedence characteristics of the inductors were improved at comparatively low frequencies, but the tendencies of it for thr frequency changes were almost same. These improvement was caused by the annihilation of the internal stresses of films, Uniaxial field annealed thin film inductor had an inductance of 1000 nH, resistance of 6 $\Omega$, and quality factor of 1 at 2 MHz.

• 대한전기학회논문지
• /
• 제40권5호
• /
• pp.496-500
• /
• 1991

The effects of annealing with and without magnetic field on magnetic properties of amorphous Fe-B-Si cores have been investigated as a function of toroidal stress. By decreasing the toroidal stress, the magnetic properties of the amorphous ribbon have beenimproved. Near 180 domain walls exist in the thermally annealed toroidal cores, but the domain walls exist in the thermally annealed toroidal cores, but the domain walls are not parallel to the longitudinal direction of the ribbon. In the specimen annealed with a magnetic field strength of 10 Oe in the longitudinal ribbon length axis, the domains are nearly parallel to the longitudinal direction due to the field induced uniaxial anisotropy resulting in further increase in the remanent magnetization and decrease in the coercive force and loss.