• Journal of Electrical Engineering and Technology
• /
• 제11권6호
• /
• pp.1787-1792
• /
• 2016

Previous walking pattern generation methods could generate walking patterns that allow only straight walking on flat and uneven terrain. They were unable to generate modifiable walking patterns whereby the sagittal and lateral step lengths and walking direction can be changed at every footstep. This paper proposes a novel walking pattern generation method to realize modifiable walking of humanoid robots on unknown uneven terrain. The proposed method employs a walking pattern generator based on the 3-D linear inverted pendulum model (LIPM), which enables a humanoid robot to vary its walking patterns at every footstep. A control strategy for walking on unknown uneven terrain is proposed. Virtual spring-damper (VSD) models are used to compensate for the disturbances that occur between the robot and the terrain when the robot walks on uneven terrain with unknown height. In addition, methods for generating the foot and vertical center of mass (COM) of the 3-D LIPM trajectories are developed to realize stable walking on unknown uneven terrain. The proposed method is implemented on a small-sized humanoid robot platform, DARwIn-OP and its effectiveness is demonstrated experimentally.

• Journal of Electrical Engineering and Technology
• /
• 제11권3호
• /
• pp.733-740
• /
• 2016

To achieve bipedal walking in real human environments, a bipedal robot should be capable of modifiable walking both on uneven terrain with different heights and on flat terrain. In this paper, a novel walking pattern generator based on a 3-D linear inverted pendulum model (LIPM) is proposed to achieve this objective. By adopting a zero moment point (ZMP) variation scheme in real time, it is possible to change the center-of-mass (COM) position and the velocity of the 3-D LIPM throughout the single support phase. Consequently, the proposed method offers the ability to generate a modifiable pattern for walking on uneven terrain without the necessity for any extra footsteps to adjust the COM motion. In addition, a control strategy for bipedal walking on uneven terrain with unknown height is developed. The torques and ground reaction force are measured through force-sensing resisters (FSRs) on each foot and the foot of the robot is modeled as three virtual spring-damper models for the disturbance compensation. The methods for generating the foot and vertical COM of 3-D LIPM trajectories are proposed to achieve modifiable bipedal walking on uneven terrain without any information regarding the height of the terrain. The effectiveness of the proposed method is confirmed through dynamic simulations.

• 전기학회논문지
• /
• 제65권2호
• /
• pp.342-348
• /
• 2016

We propose an obstacle detection algorithm for unmanned ground vehicle on uneven terrain. The key ideas of the proposed algorithm are the use of two-layer laser range data to calculate the gradient of a target, which is characterized as either ground or obstacles. The proposed obstacle detection algorithm includes 4-steps: 1) Obtain the distance data for each angle from multiple lidars or a multi-layer scan lidar. 2) Calcualate the gradient for each angle of the uneven terrain. 3) Determine ground or obstacle for each angle on the basis of reference gradient. 4) Generate a new distance data for each angle for a virtual laser scanner. The proposed algorithm is verified by various experiments.

• 로봇학회논문지
• /
• 제4권4호
• /
• pp.265-272
• /
• 2009

IVarious driving mechanisms to adapt to uneven environment have been developed for many urban search and rescue (USAR) missions. A tracked mechanism has been widely used to maintain the stability of robot's pose and to produce large traction force on uneven terrain in this research area. However, it has a drawback of low energy efficiency due to friction force when rotating. Moreover, single tracked mechanism can be in trouble when the body gets caught with high projections, so the track doesn't contact on the ground. A transformable tracked mechanism is proposed to solve these problems. The mechanism is designed with several articulations surrounded by tracks, used to generate an attack angle when the robot comes near obstacles. The stair climbing ability of proposed robot was analyzed since stairs are one of the most difficult obstacles in USAR mission. Stair climbing process is divided into four separate static analysis phases. Design parameters are optimized according to geometric limitations from the static analysis. The proposed mechanism was produced from optimized design parameters, and demonstrated in artificially constructed uneven environment and the actual stairway.

• 전자공학회논문지SC
• /
• 제48권4호
• /
• pp.33-39
• /
• 2011

이족로봇은 높은 자유도로 인하여 기구적인 불안정성을 내포하고 있기 때문에 보행 시 자세 안정성의 확보가 중요하다. 일반적으로 평지에서는 안정적인 정적 보행이 가능하지만 평지가 아닌 비평탄 지형에서는 보행의 안정성이 현저하게 떨어진다. 본 논문에서는 비평탄 지형에서 이족로봇의 자세 안정화를 포함한 강인한 보행 방법을 제안하였다. 이족로봇의 중앙에 장착된 자이로 센서와 가속도 센서 값을 기반으로 보행 순간마다 센서 값을 감지하여 로봇 몸체의 기울어진 각도를 인식하여 보행 자세를 안정화하는 강인 보행 알고리즘을 설계하였다. 비평탄 지형 보행은 로봇의 기울어진 각도를 인식하여 그 상황에 맞게 관절 각도를 변화시켜 이족로봇 상체의 각도가 평지보행에서와 같도록 하체관절의 각도를 보정하여 보행에서의 안정성을 높였다. 제안된 보행알고리즘은 실제 제작된 이족로봇을 사용하여 비평탄 지형에서 실험하여 제안된 보행 알고리즘의 성능을 검증하였다.

• 한국산학기술학회논문지
• /
• 제15권9호
• /
• pp.5738-5743
• /
• 2014

본 논문은 경사 인식을 통한 비평탄 지형에서의 전동 휠체어 제어 알고리즘에 관한 내용이다. 최근 고령자가 인구가 급격하게 증가되고 있으며, 이에 따라 휠체어 사용 인구 또한 급격하게 증가되고 있다. 하지만 대부분의 휠체어는 사용자의 안전성을 확보할 수 있는 어떠한 장치 없이 사용자가 직접 제어하고 있다. 이로 인해 경사로에서는 중력의 영향으로 인한 차량 제어에 어려움을 겪게 된다. 이에 본 논문에서는 차량이 경사지에서 이동할 경우 평지에서 이동하는 것과 유사한 모션제어를 수행할 수 있도록 차량 제어 알고리즘을 제안한다. 이때 다른 센서를 적용하지 않고 사용자의 제어 입력에 대비 차량의 이동 상태를 파악하여 차량이 경사지에 이동하는 과정에서 발생하는 오차를 인식하여 이를 최소화 할 수 있도록 제어기를 구성함으로써 차량이 사용자가 원하는 상태로 제어할 수 있도록 한다. 이러한 경사에 의해 발생하는 오차 및 이에 대한 차량제어에 대해 시뮬레이션을 통해 이를 검증하였다.

• 정보처리학회논문지:소프트웨어 및 데이터공학
• /
• 제12권5호
• /
• pp.237-242
• /
• 2023

고성능의 보행 로봇에 관한 연구가 활발하게 이루어지고 있으며 4족 보행 로봇은 비평탄 지형에서 이동성과 적응력이 뛰어나 많은 관심을 받고 있지만 높은 비용으로 도입과 활용성에 어려움이 있다. 본 논문에서는 저비용의 4족 로봇에 지능적 기능을 적용하여 활용도를 높이기 위해 임베디드 보드에 IMU와 강화학습을 탑재하여 비평탄 지형 극복능력을 개선하고 카메라와 딥러닝을 이용하여 객체를 자동으로 검출하는 방법을 제시한다. 로봇은 4족 포유류 동물의 다리 형태로 구성되고 각 다리는 3 자유도를 가진다. 설계된 3D 모델로 시뮬레이션 환경에서 복잡한 지형을 학습시키고 실제 로봇에 적용한다. 본 연구방법의 적용을 통해 평탄 지형과 비평탄 지형의 보행 능력에 크게 차이가 나지 않음을 확인하였으며 제한된 실험조건에서 실시간으로 사람 검출을 수행하는 동작을 확인하였다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2006년 학술대회 논문집 정보 및 제어부문
• /
• pp.205-207
• /
• 2006

Since a humanoid robot inherently suffers from instability and always risks tipping itself over, or topping to the ground, it is necessary to ensure high stability and reliability of walk. An unexpected ground condition is one of the principal factors of instability. This paper proposes a walk stabilization method consisting of a Fuzzy algorithm and geometry under uneven terrain. The ground reaction forces that are measured by the FSR sensors on the sole are used to check the ground condition and the robot posture. The effectiveness of proposed method is verified by computer simulations.

• 제어로봇시스템학회논문지
• /
• 제19권12호
• /
• pp.1152-1159
• /
• 2013

This paper proposes an effective walking system for a hexapod robot on uneven terrain. To overcome the deficiencies of two-pair walking systems, which are effective on even terrain, the use of only three legs changes the steps required for movement. The proposed system receives feedback data from switches attached to the bottom of the legs and gyro sensor to carry out stable walking using the Bezier curve algorithm. From the coordinates of the Bezier curve, which guarantees the circular motion of legs, the motor's angle value can be obtained using inverse kinematics. The angle values are sent to each motor though RS-485 communication. If a switch is pushed by the surface during navigation in the Bezier curve pattern, the robot is designed to change its circular course. Through the changed course, each leg can be located on an optimal surface and the wobble phenomenon is reduced by using a normal vector algorithm. The simulation and experiment results show the efficiency of the proposed algorithm.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2005년도 ICCAS
• /
• pp.1048-1053
• /
• 2005

This paper presents design and integration of the ROBHAZ-DT3, which is a newly developed mobile robot system with chained double-track mechanisms. A passive adaptation mechanism equipped between the front and rear body enables the ROBHAZ-DT3 to have good adaptability to uneven terrains including stairs. The passive adaptation mechanism reduces energy consumption when moving on uneven terrain as well as its simplicity in design and remote control, since no actuator is necessary for adaptation. Based on this novel mobile platform, a rescue version of the ROBHAZ-DT3 with appropriate sensors and a semi-autonomous mapping and localization algorithm is developed to participate in the RoboCup2004 US-Open: Urban Search and Rescue Competition. From the various experiments in the realistic rescue arena, we can verify that the ROBHAZ-DT3 is reliable in traveling rugged terrain and the proposed mapping and localization algorithm are effective in the unstructured environment with uneven ground. The another application is an military robot for an EOD(Explosive Ordnance Disposal) and reconnaissance mission. The military version of the ROBHAZ-DT3 with a water disrupter, a thermal scope and a long distance wireless communication device is developed and sent to the area of military tactics in Iraq. Consequently, the feasibility of the military version of ROBHAZ-DT3 is verified.