• 콘크리트학회논문집
• /
• 제12권5호
• /
• pp.25-34
• /
• 2000

When concrete is placed underwater, it is diluted with separating cementitious material and as a result the quality of concrete becomes poor. To solve this problem, antiwashout underwater concrete is increasingly used for the construction and repair of the concrete structure underwater. The objective of this study is to investigate the characteristics of antiwashout underwater concrete as to the mix proportion, casting and curing water through experimental researches. The unit weight of water and cement, water-cement ratio, fine aggregate ratio, unit weight of antiwashout underwater agent and superplasticizer, and casting and curing water were chosen to measure the suspended solids, pH, air contents, slump flow, unit weight of hardened concrete, and compressive strength. From this study, the incremental modulus at mix proportion design and unit weight of antiwashout underwater agent were increased more than fresh water, and it is a optimum mix proportion that the unit weight of water(and cement) is 230kg/$\textrm{m}^3$(460kg/$\textrm{m}^3$), waterOcement ratio is 50%, fine aggregate ratio is 40%, unit weight of antiwashout underwater agent is 1.2% of water contents per unit weight of concrete, and unit weight of supeplasticizer is 2.5% of cement contents per unit weight of concrete when the antiwashout underwater concrete is used for the underwater work of ocean.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1999년도 학회창립 10주년 기념 1999년도 가을 학술발표회 논문집
• /
• pp.135-138
• /
• 1999

The objective of this study is to investigate the compressive strength property of antiwashout underwater concrete with curing water through experimental researches. Type of casting and curing water(fresh water, sea water) are used as main experimental parameter, additionally a few variables affecting compressive strength property are used ; water-cement ratio (45%, 48%, 50%, 52%, 55%), and unit weight of admixtures (antiwashout underwater agent ; 0.6%, 0.8%, 1.0%, 1.2%, 1.4% of unit weight of water, superplasticizer ; 0.5%, 1.0%, 1.5%, 2.0%, 2.5% of unit weight of cement)) Compressive strength level of antiwashout underwater concrete which was cast and cured in fresh water is higher than other one. Consequently, incremental modulus has to increase when the antiwashout underwater concrete is made use of underwater work from ocean.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2002년도 봄 학술발표회 논문집
• /
• pp.305-312
• /
• 2002

To estimate the effects of lime and cement on the surplus soil, the engineering properties of the marine deposited clay and the fresh water clay were analyzed. The specimen were prepared under several curing conditions, namely, underwater curing, wet condition curing and underwater curing after heating. Unconfined compression strength were estimated after 7, 14, 28 and 60 days, respectively. The strength were steeply increased with time until first 14 days. Specially the increase of the strength of the heated soil were large.

• 한국지반공학회논문집
• /
• 제21권4호
• /
• pp.21-29
• /
• 2005

경량기포혼합토는 경량성으로 인하여 지반내 응력증가에 따른 침하, 활동 파괴, 측방 유동 등의 지반공학적 문제를 해결할 수 있다. 최근 지반개량 및 보강을 위한 경량기포혼합토공법은 육상공사 및 해상공사에 그 적용이 확대되고 있다. 일련의 삼축 및 일축압축강도시험을 수중양생된 경량기포혼합토에 대하여 그 거동 특성을 파악하기 위하여 수행하였다. 특히 수중에 타설하는 경우에 수압에 의해서 경량기포혼합토내에 생성된 기포가 수축되기 때문에 대기중에 타설된 경우와 비교하여 경량기포혼합토의 밀도가 커질 수 있다. 따라서 경량기포혼합토공법을 하천 저면이나 해저에 적용하기 위해서는 수심에 의한 양생압력에 대한 경량기포혼합토의 역학적 특성을 규명해야 한다. 본 논문에서는 수중에 타설되는 경량기포혼합토의 역학적 성질을 조사하기 위해서 양생압력 조절이 가능한 수중양생 시뮬레이션 시스템을 이용하였다. 즉, 수중 5미터와 10미터의 양생조건을 가정하여 경량기포혼합토의 역학적 특성을 조사하였으며 배합인자들에 의한 경량기포혼합토의 압축강도 변화를 모두 고려할 수 있는 정규화계수(Normalized Factor, NF)와 압축강도와의 관계를 제시하였다.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2009년도 세계 도시지반공학 심포지엄
• /
• pp.463-471
• /
• 2009

Cemented soils or concrete are usually cured under moisture conditions and their strength increases with curing time. An insufficient supply of water to cemented soils can contribute to hydration process during curing, which results in the variation of bonding strength of cemented soils. In this study, by the consideration of in situ water supply conditions, cemented sand with cement ratio less than 20% was prepared by air dry, wrapped, and underwater conditions. A series of unconfined compression tests were carried out to evaluate the effect of curing conditions on the strength of cemented soils. The strength of air dry curing specimen was higher than those of wrapped cured specimen when cement ratio was less than 10%, whereas it was lower when cement ratio was greater than 10%. Regardless of cement ratio, air dry cured specimens were stronger than underwater cured specimens. A strength increase ratio with cement ratio was calculated based on the strength of 4% cemented specimen. The strength increase ratio of air dry cured specimen was lowest and that of wrapped and underwater cured ones increased by square. Strength of air dry cured specimen dropped to maximum 30% after wetting when cement ratio was low. However, regardless of cement ratio, strength of wrapped specimens dropped to an average 10% after wetting.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2001년도 봄 학술발표회 논문집
• /
• pp.941-946
• /
• 2001

In this study, three kinds of fine aggregate (river sand, sea sand, crushed sand) were used and four different s/a (38%, 40%, 42%, 45%) were applied separately to this experimental for get the conclusion written below. Regardless of kinds of fine aggregate and casting-curing condition, maximum unit weight is seen at 40% of s/a and also to be seen in case of crushed sand. It's for that specific gravity of crushed sand is bigger comparatively than river sand and sea snad's one. Compressive strength is measured river sand, crushed sand, sea sand by order of size ; Regardless of variation of s/3, casting-curing condition and age. Compressive strength recorded maximum when s/a is 42% whatever sort of fine aggregate are. As the result, according to references, the optimum s/a of underwater antiwashout concrete is 40% but in this study, from compressive strength of view, the optimum s/a of underwater antiwashout concrete is 42%.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1997년도 봄 학술발표회 논문집
• /
• pp.301-307
• /
• 1997

This paper is evaluated for properties of aggregate and antiwashout admixture not only to minimize segregation and water contamination of underwater concrete but also to meet concrete quality required. Two antiwashout admixtures used in this study were available domestically and slump flow, pH, setting time, and filing property of fresh concrete and the compressive strength, flexural strength under water and in the air under 2 different curing conditions ($10^{\cire}C$ and $20^{\cire}C$ ) were measured. Compressive strength ratio of specimens cured in and water temperature $10^{\cire}C$ /$20^{\cire}C$ added HPEC and HPMC was 64% and 89%, respectively. Relative compressive strength of 2 kinds observed higher concrete added HPEC, 3% at $10^{\cire}C$ curing temperature, 34% at $20^{\cire}C$ . The flexural strength of specimens made under water was 1/4~1/6 of compressive strength similar to the existing data in the literature.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2023년도 가을학술발표대회논문집
• /
• pp.89-90
• /
• 2023

In this study, grout was poured into seawater to confirm the effect of similar marine environment and underwater erosion on the mechanical performance of domestically produced high-performance grout and compared with the existing strength. As a result of the compressive strength measurement, the specimen that simultaneously performed underwater drilling and seawater curing showed slow initial strength expression in both H1 and H2, and from the 7th day, it was confirmed to be within 2% of the existing intensity. It is believed that both grout were caused by disturbance with water during underwater drilling, and the same strength was subsequently shown as the existing strength.

• 대한토목학회논문집
• /
• 제29권5C호
• /
• pp.207-215
• /
• 2009

시멘트 혼합토나 콘크리트는 일반적으로 습윤상태를 유지하면서 양생이 되며 양생기간이 늘어남에 따라 수화작용으로 강도는 증가한다. 하지만 양생기간 동안 시멘트 혼합토에 충분한 수분이 공급되지 않을 경우 이는 수화작용에 영향을 미치고 결국 시멘트 혼합토의 강도 변화를 가져오게 된다. 본 연구에서는 시멘트비가 20% 미만인 시멘트 혼합토가 현장에서 시공 될 때 발생할 수 있는 수분공급 조건을 고려하여 네 가지 양생방법(대기중 양생, 밀봉 양생, 습윤 양생, 수중 양생)으로 제작된 고결모래의 양생조건에 따른 일축압축강도의 특성을 비교하였다. 전기간(3일) 대기중 양생한 공시체의 강도는 시멘트비가 10% 미만인 경우 밀봉 및 습윤 양생한 공시체보다 크지만 시멘트비가 10% 이상인 경우는 더 작았다. 시멘트비에 관계 없이 대기중 양생한 공시체가 수중 양생한 공시체보다 더 큰 강도를 발휘하였다. 양생방법이 동일한 경우 시멘트비 4%의 강도를 기준으로 시멘트비 증가에 따른 강도 증가율은 대기중 양생한 공시체가 가장 낮았으며, 밀봉, 습윤 및 수중 양생한 공시체의 강도는 시멘트비 증가율의 제곱으로 증가하였다. 공시체를 2일 양생 후 1일 동안 수침시켰을 때 밀봉 또는 습윤 양생한 공시체의 강도는 수침시키지 않은 공시체보다 시멘트비에 관계없이 평균 10% 정도 저하되었으나, 대기중 양생한 공시체는 시멘트비가 낮은 경우 최대 30% 정도까지 크게 저하되었다. 본 연구 결과는 현장에서 발생하는 수분공급 조건과 수침에 따른 시멘트 혼합토의 강도 변화를 예측하여 시멘트 혼합토를 사용한 댐과 같은 지반구조물의 안정성 확보에 기여할 수 있다.

• Corrosion Science and Technology
• /
• 제8권2호
• /
• pp.68-73
• /
• 2009

An evaluation of underwater - repair coating materials was based on the premise that defective areas of the existent epoxy coating such as blistering and cracking will be repaired on spot under submerged condition. Tests include the clarification as to whether they are compatible between as-built coating and new repair coating on each concrete specimen. Candidate coating materials for repair were tested in a laboratory to scrutinize their suitability to perform the needed function satisfactorily. The qualification tests performed are as a minimum as follows: Integrated radiation tolerance test, chemical resistance test (submerged condition in deionized water), hardness test and adhesion test of the repair materials. The proper repair coating materials were selected and approved from this test results.