• Journal of Ocean Engineering and Technology
• /
• v.17 no.1
• /
• pp.1-7
• /
• 2003

Autonomous underwater vehicles (AUVs) are unmanned, underwater vessels that are used to investigate sea environments in the study of oceanography. Docking systems are required to increase the capability of the AUVs, to recharge the batteries, and to transmit data in real time for specific underwater works, such as repented jobs at sea bed. This paper presents a visual :em control system used to dock an AUV into an underwater station. A camera mounted at the now center of the AUV is used to guide the AUV into dock. To create the visual servo control system, this paper derives an optical flow model of a camera, where the projected motions of the image plane are described with the rotational and translational velocities of the AUV. This paper combines the optical flow equation of the camera with the AUVs equation of motion, and deriver a state equation for the visual servo AUV. Further, this paper proposes a discrete-time MIMO controller, minimizing a cost function. The control inputs of the AUV are automatically generated with the projected target position on the CCD plane of the camera and with the AUVs motion. To demonstrate the effectiveness of the modeling and the control law of the visual servo AUV simulations on docking the AUV to a target station are performed with the 6-dof nonlinear equations of REMUS AUV and a CCD camera.

• IEMEK Journal of Embedded Systems and Applications
• /
• v.6 no.3
• /
• pp.149-156
• /
• 2011

Transmission delay and packet loss induced by a communication network can degrade the control performance and, even make the system unstable. This paper presents a method for compensating transmission delay and packet loss in a networked control system for unmanned underwater vehicle. The proposed method is based on Lagrange interpolation in order to satisfy the requirements of simplicity and model-independency. In this work, the lost/delayed data are estimated in real time by only using the past data without requiring any mathematical model of the controlled system. Consequently, the proposed method can be implemented independent of the controlled system, and also it can achieve fast and accurate compensation performance. The performance of the proposed technique is evaluated by numerical simulations with an unmanned underwater vehicle.

• 제어로봇시스템학회:학술대회논문집
• /
• 1993.10a
• /
• pp.527-532
• /
• 1993

Generally the method of depth controlling is classified into buoyancy control and thrust control. In this study, we employed thrust control system. And mathematical modeling and computer simulation are performed in order to design auto depth control system for underwater vehicle. Consequently, the specifications of components are determined, and the performance of system is analyzed.

• Journal of Institute of Control, Robotics and Systems
• /
• v.20 no.4
• /
• pp.402-407
• /
• 2014

In this paper, residual sway control of objects that are moved underwater is investigated. The fuel transfer system in a nuclear power plant transfers the nuclear fuel rods underwater. The research on the dynamics of the loads transferred in different mediums (water and air) and their control methods have not been fully developed yet. The attenuation characteristics of the fuel transfer system have been studied to minimize its residual vibration by considering the effects of hydrodynamic forces acting on the fuel rod. First, a mathematical model is derived for the underwater fuel transfer system, and then experiments have been conducted to study the dynamic behavior of the rod while it travels underwater. Lastly, the residual vibration at the end point is minimized using the input shaping technique.

• 제어로봇시스템학회:학술대회논문집
• /
• 1993.10a
• /
• pp.540-545
• /
• 1993

When modeling an underwater vehicle uncertainty arises in the presence of unsteady flow. It is difficult to include the uncertainty in the model and is therefore desirable to investigate robust controller design methods for the underwater vehicle. In the paper two robust control methods are applied for the underwater system. One is standard H$_{\infty}$ control and the other is time-varying sliding mode control with modified saturation function. Suboptimal design parameters for H$_{\infty}$ control and design parameters for time-varying switching surfaces are provided. Simulations and comparison are carried out.t.

• Journal of Institute of Control, Robotics and Systems
• /
• v.3 no.1
• /
• pp.40-45
• /
• 1997

A robust disturbance rejection controller for the hovering motion of underwater vehicles in near the surface of sea is presented. The suggested controller consists of two control parts, the one is disturbance observer for taking into account the effects of sea wave and missile-launching forces, and the other is sliding mode controller for the robust stability of underwater vehicles with model uncertainties and nonlinearities. It is shown that the sliding mode control system with disturbance observer is more effective compared with the sliding mode control system, especially in case that large sea wave force is affected.

• Proceedings of the KIEE Conference
• /
• 2005.05a
• /
• pp.158-160
• /
• 2005

In order to successfully exploit underwater resources, the first step would be a marine environmental research and exploration on the seafloor. Traditionally one sets up a long-term underwater experimental unit on the seafloor and retrieves the unit later after a certain period time. Essential to these applications is the reliable teleoperation and telemetering of the unit. In our proposed ultrasonic-wave remote control system and an underwater sound recognition algorithm that can identify the sound signal without the influence of disturbances due to underwater environmental changes. The proposed method provides a means suitable for units which require low power dissipation and long-time underwater operation. We demonstrate its ability of securing stability and fast sound recognition through experimental methods.

• Journal of the Society of Naval Architects of Korea
• /
• v.61 no.4
• /
• pp.216-225
• /
• 2024

The sliding mode controller has characteristics that ensure stability and robustness against system uncertainty and disturbance. However, chattering occurs in the control inputs to compensate for system uncertainties and ensure that the system operates efficiently on the sliding surface. When the disturbance is large, using a sliding mode controller requires a large control gain value, which also increases chattering and reduces performance. Therefore, in this study, a nonlinear disturbance observer was used to compensate for external disturbances such as currents and waves and uncertainty in the control system for autonomous underwater vehicles. Accordingly, a robust controller can be implemented while reducing the control gain. The disturbance observer serves to ensure that the behavior of the actual system is closer to the nominal model by compensating for uncertainties between the actual system model and the nominal model during the control process. Therefore, the simulation results show that the performance and robustness of the autonomous underwater vehicle controller are improved by introducing a disturbance observer.

• 제어로봇시스템학회:학술대회논문집
• /
• 2000.10a
• /
• pp.268-268
• /
• 2000

In the inspection of the reactor pressure vessel using an underwater mobile robot, we developed a new bi-directional guidance control scheme between an underwater mobile robot and a laser pointer. We imposed fanning to the inclinometer embedded in the mobile robot to improve its transient response, and used heuristic control scheme to reduce accidents when the laser pointer losts the mobile robot. We implemented these algorithms to our reactor vessel inspect ion system and performed a series of experiments.

• IEMEK Journal of Embedded Systems and Applications
• /
• v.16 no.4
• /
• pp.129-136
• /
• 2021

River facilities and port structures require a regular inspection and diagnosis due to obsolescence. Currently, most river facilities are undergoing indirect inspection and diagnosis by divers. The underwater inspections are not feasible due to safety issues of divers and restrictions on working hours and environment. To overcome these issues, it is intended to conduct inspections of river facilities using underwater drones. In this research, an underwater ROV (Remote Operated Vehicle) has been developed, which is a kind of drone with propellers. As a key device of this research, an injection device has been attached to the underwater drone to conduct an operation test, a stable operation test of an underwater drone, and a test of attached sensors. The river facility inspection can be carried out optimally using the hovering control of the drone and injection systems. With the developed ROV system, hovering test and injection test have been performed to verify the feasibility of this development.