• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2010년도 춘계학술대회 논문집
• /
• pp.325-326
• /
• 2010

• 대한기계학회논문집A
• /
• 제33권10호
• /
• pp.1029-1037
• /
• 2009

Recently, the technologies of mobile robots have been growing rapidly in the fields such as cleaning robot, explosive ordnance disposal robot, patrol robot, etc. However, the researches about the autonomous underwater robots have not been done so much, and they still remain at the low level of technology. This paper describes a model of 3-joint (4 links) fish robot type. Then we calculate the dynamic motion equation of this fish robot and use Singular Value Decomposition (SVD) method to reduce the divergence of fish robot's motion when it operates in the underwater environment. And also, we analysis response characteristic of fish robot according to the parameters of input torque function and compare characteristic of fish robot with 3 joint and fish robot with 2 joint. Next, fish robot's maximum velocity is optimized by using the combination of Hill Climbing Algorithm (HCA) and Genetic Algorithm (GA). HCA is used to generate the good initial population for GA and then use GA is used to find the optimal parameters set that give maximum propulsion power in order to make fish robot swim at the fastest velocity.

• 한국지능시스템학회:학술대회논문집
• /
• 한국퍼지및지능시스템학회 1998년도 The Third Asian Fuzzy Systems Symposium
• /
• pp.320-325
• /
• 1998

Underwater robotic vehicles (URVs) have been an important tool for various underwater tasks because they have greater speed, endurance, depth capability, and safety than human divers. As the use of such vehicles increases, the vehicle control system becomes one of the most critical subsytems to increase autonomy of the vehicle. The vehicle dynamics are nonlinear and their hydrodynamic coefficients are often difficult to estimate accurately. In this paper a new type of fuzzy model-based controller based on Takagi-Sugeno-Kang fuzzy model is designed and applied to the control of of an underwater robotic vehicle. The proposed fuzzy controller : 1) is a nonlinear controller, but a linear state feedback controller in the consequent of each local fuzzy control rule ; 2) can guarantee the stability of the closed-loop fuzzy system ; 3) is relatively easy to implement. Its good performance as well as its robustness to the change of parameters have been shown and compared with the re ults of conventional linear controller by simulation.

• International Journal of Fuzzy Logic and Intelligent Systems
• /
• 제13권2호
• /
• pp.91-99
• /
• 2013

An autonomous unmanned underwater vehicle is a type of marine self-propelled robot that executes some specific mission and returns to base on completion of the task. In order to successfully execute the requested operations, the vehicle must be guided by an effective navigation algorithm that enables it to avoid obstacles and follow the best path. Architectures and principles for intelligent dynamic systems are being developed, not only in the underwater arena but also in related areas where the work does not fully justify the name. The problem of increasing the capacity of systems management is highly relevant based on the development of new methods for dynamic analysis, pattern recognition, artificial intelligence, and adaptation. Among the large variety of navigation methods that presently exist, the dynamic window approach is worth noting. It was originally presented by Fox et al. and has been implemented in indoor office robots. In this paper, the dynamic window approach is applied to the marine world by developing and extending it to manipulate vehicles in 3D marine environments. This algorithm is provided to enable efficient avoidance of obstacles and attainment of targets. Experiments conducted using the algorithm in MATLAB indicate that it is an effective obstacle avoidance approach for marine vehicles.

• 한국해양공학회지
• /
• 제26권6호
• /
• pp.39-45
• /
• 2012

Underwater robots are generally used for the construction of seabed structures, deep-sea ecosystem research, ocean energy development, etc. A ducted marine propulsor is widely used for the thruster of an underwater robot because of its collision protection, efficiency increase, cavitation reduction, etc. However, the flow of a ducted propeller is very complex because it involves strong flow interactions between the blade impeller and duct. The present work aimed to design a ducted propeller using 2-D strip theory and CFD analysis. The hydrodynamic forces (i.e. and ) were computed to set the local angle of attack in a spanwise direction of the propeller blade. After the propeller design, performance coefficients such as the thrust, torque, and efficiency were computed to check whether the designed performance was achieved. To validate the present analysis, the thrust was compared with experimental data and good agreement was obtained.

• 한국정밀공학회지
• /
• 제29권9호
• /
• pp.978-985
• /
• 2012

Starfish are a critical problem for fishermen since they eat every farming product including shellfish. The number of starfish is increasing dramatically because they have no natural enemy underwater. We consider the concept of capturing starfish using a semi-autonomous robot. A new underwater robot design to capture starfish is proposed using cooperation between humans and the robot. A requirements list for the robot is developed and two conceptual designs are proposed. Each robot is designed as a modular platform. The kinematic and dynamic performance of each robot is analyzed and compared. This study is a starting point for developing a starfish capture robot and designing underwater robots for other applications. In the near future, a prototype will be assembled and tested in a marine environment.

• 수산해양기술연구
• /
• 제58권1호
• /
• pp.68-74
• /
• 2022

This study analyzed the wake characteristics of the rim-driven propeller (RDP) used in an underwater robot. For underwater robots to perform specific missions, not only propulsion characteristics but also wake characteristics must be considered. In this study, a blade was designed based on NAC 0012 with a symmetrical cross-section. The RDP was hubless with three or four blades. The influence of both the free water surface and the bottom was considered, and the wake was measured using a particle image velocimetry in the advance ratio of 0.2 to 1. Model 1 showed symmetrical wakes in the entire advance ratio section. Model 2 showed asymmetric wakes due to the influence of the free water surface and the bottom at low advance ratio.

• Ocean and Polar Research
• /
• 제37권1호
• /
• pp.73-80
• /
• 2015

In order to determine the appropriate volume of the a pressure compensator of deep seabed mining robots, this paper reports on an experimental test for oil volume change in an oil-filled box. At the design stage of underwater robots, it is crucial to determine the capacity of the hydraulic compensator which is replenished as much as the contracted oil volume of the robots. A pilot mining robot, MienRo was designed to work under 6,000 m in the deep sea. The hydraulic actuating oil and pressure compensating oil of MineRo may be exposed at a hydrostatic pressure environment of 600 bar. Although the oil can be assumed to be incompressible, its volume is actually changed under high pressure conditions due to air contained in the oil and oil contraction. To determine the capacity of the pressure compensator, the oil contraction rate should be verified through an experimental test using a hyperbaric chamber.

• 제어로봇시스템학회논문지
• /
• 제21권4호
• /
• pp.349-355
• /
• 2015

Underwater robots generally show better performances for tasks than humans under certain underwater constraints such as. high pressure, limited light, etc. To properly diagnose in an underwater environment using remotely operated underwater vehicles, it is important to keep autonomously its own position and orientation in order to avoid additional control efforts. In this paper, we propose an efficient method to assist in the operation for the various disturbances of a remotely operated vehicle for the diagnosis of underwater structures. The conventional AHRS-based bearing estimation system did not work well due to incorrect measurements caused by the hard-iron effect when the robot is approaching a ferromagnetic structure. To overcome this drawback, we propose a sensor fusion algorithm with the camera and AHRS for estimating the pose of the ROV. However, the image information in the underwater environment is often unreliable and blurred by turbidity or suspended solids. Thus, we suggest an efficient method for fusing the vision sensor and the AHRS with a criterion which is the amount of blur in the image. To evaluate the amount of blur, we adopt two methods: one is the quantification of high frequency components using the power spectrum density analysis of 2D discrete Fourier transformed image, and the other is identifying the blur parameter based on cepstrum analysis. We evaluate the performance of the robustness of the visual odometry and blur estimation methods according to the change of light and distance. We verify that the blur estimation method based on cepstrum analysis shows a better performance through the experiments.

• 전자공학회논문지SC
• /
• 제48권6호
• /
• pp.91-98
• /
• 2011

본 논문에서는 수중로봇에 쓰일 수 있는 카메라 영상을 기반으로 하는 인공표식물의 인식 및 추종 기법을 제안한다. 문제를 풀기 위해 제안된 방법은 인식과 추종의 두 개의 단계로 이루어져 있으며 인식단계에서는 물체의 외형에 관한 특징을 분석한 후 비선형 최적화 알고리즘을 통하여 알맞은 목표물로 분류한다. 이 후 추종 단계에서는 분류된 목표물에서 색깔 히스토그램을 추출한 후 meanshift 추종 법을 이용하여 지속적으로 추종하는 방법을 택하였다. 히스토그램 매칭 시에는 Bhattacharyya 거리를 계산하는 방법을 이용하였다. 결과적으로 제안하는 접근법은 수중로봇의 영상처리 분야에 다음과 같은 공헌을 할 것으로 기대한다. 1) 제안하는 방법은 카메라의 움직임으로 생기는 물체의 자세변화나 크기 변화에도 강인하게 대처할 수 있으며 2) 카메라 센서를 통한 방법이므로 초음파 센서 등의 기기들에 비하여 가격 경쟁력이 우수하다. 3) 또한 본 논문에서는 일반적으로 많이 쓰이는 특징 점을 기반으로 한 방법이 탁도 변화에서는 형태를 기반으로 한 방법보다 열등할 수 있음을 실험을 통하여 보였다. 4) 마지막으로 제안된 방법의 성능을 기존의 방법들과 비교하여 수치적으로 검증해 보았다.