Back analysis model, capable of calculating the mechanical properties and the in-situ stresses of jointed rock mass, was developed based on the inverse method using a continuum theory. Constitutive equation for the behavior of jointed rock contains two unknown parameters, elastic modulus of intact rock and stiffness of joint, hence algorithm which determines both parameters simultaneously cannot be established. To avoid algebraic difficulties elastic modulus of intact rock was assumed to be known, since the representative value of which would be quite easily determined. Then, the ratio ($\beta$) of joint stiffness to elastic modulus of intact rock was assigned and back analysis for the behavior of jointed rock was carried-out. The value $\beta$ was repeatedly modified until the elastic modulus from back analysis became very comparable to the predetermined value. The joint stiffness could be calculated by multipling the ratio $\beta$ to the final result of elastic modulus. Accuracy and reliability of back analysis procedure was successfully testified using a sample model simulating the underground opening in the jointed rock mass. Applicability of back analysis model for the underground excavation in practice was also verified by analyzing the mechanical properties of jointed rock in which underground oil storage cavern were under construction.
지하저장공동에 설치되는 콘크리트 플러그는 기능한 모든 하중조건에 대해 안정하게 유지됨은 물론 저장된 유류의 외부 유출과 지하수의 과다 유입을 방지하는 기능을 수행하여야 하므로 지하 유류 비축기지의 건설 및 운영 단계에서 매우 중요한 역할을 한다. 플러그가 시공되고 나면 외부와의 접촉이 모두 차단되게 되므로 플러그가 그 기능을 제대로 발휘하기 위해서는 설계단계에서부터 역학적 및 수리적 고려가 이루어져야 한다. 따라서 본 연구에서는 2차원 및 3 원 유한 차분 프로그램인 FLAC 과 FLA $C^{3D}$를 사용하여 플러그에 대한 역학적 및 수리적 해석을 실시하였다. 먼저 측압계수의 변화, 심도의 변화, 플러그의 형상변화, 암반과 콘크리트 접촉면의 상태변화, 굴착손상권의 발생 등 다양한 조건 하에서 플러그의 거동 변화에 대한 역학적 해석을 실시하였으며, 2차원 해석조건과 동일한 조건을 가진 3차원 모델을 구성하여 그 결과를 2차원 해석과 비교, 검토하였다. 또한 플러그의 쐐기깊이 변화에 따른 수리해석을 실시하여 그 결과를 비교하였다.다.
This paper presents the results of deformation measurement and numerical analysis carried out to study the behaviour of the rock mass around large underground oil storage caverns. Displacements during excavation have been monitored using borehole extensometers which had been installed before the excavation of caverns proceeded. Numerical analysis has been carried out to examine the three-dimensional behaviour of rock and the face advance effect. The input parameters for this analysis were determined from the results of laboratory and field tests. The deformation modulus of the rock mass was determined from plate loading test at the site and in-situ stresses were measured from the overcoring method with USBM deformation gauge. The results from this study gave a clear picture for three-dimensional behaviour of the rock mass, hence would be used for the optimum design.
A new type of cut method, called SK-cut, was developed in order to overcome the shortcomings of the conventional V-cut and Burn-cut blasting methods. Total 190 times of test blasts were performed for the evaluation of the efficiency of new blasting method. V-cut, Burn cut and SK-cut were compared by applying them to the excavation of main gallery and construction tunnel of underground oil storage cavern. Test results showed that excavation efficiency of the new method was increased by 5.9~9.8% and that specific charge was reduced to 71~92%.
A two dimensional analysis program for groundwater flow in fractured network was developed to analyze the influence of discontinuity characteristics on groundwater flow. This program involves the generation of discontinuities and also connectivity analysis. The discontinuities were generated by the probabilistic density function(P.D.F.) reflecting the characteristics of discontinuities. And the fracture network model was completed through the connectivity analysis. This program also involves the analysis of groundwater flow through the discontinuity network. The result of numerical experiment shows that the equivalent hydraulic conductivity increased and became closer to isotropic as the density and trace length increased. And hydraulic head decreased along the fracture zone because of much water-flow. The grouting increased the groundwater head around cavern. An analysis of groundwater flow through discontinuity network was performed around underground oil storage cavern which is now under construction. The probabilistic density functions(P.D.F) were obtained from the investigation of the discontinuity trace map. When the anisotropic hydraulic conductivity is used, the flow rate into the cavern was below the acceptable value to maintain the hydraulic containment. But when the isotropic hydraulic conductivity is used, the flow rate was above the acceptable value.
Leakage of hydrocarbon compound from underground storage tank has been a significant issue to the hazard of environmental contaminants. It is therefore necessary to develop the measurement technique of hydrocarbon compound concentration. In this study, the possibility of TDR application to measure concentration of hydrocarbon compound, especially diesel, in a sandy soil was investigated. Experiments were conducted in two different conditions. The first one was to measure the resistances of the soil columns packed according to the various ratios of tab water and diesel content in the total voids. The other was to measure the resistance of the soil under the flow condition where diesel oil was allowed to infiltrate into the KCl-saturated soil column. The experimental results showed that there exists a significant relationship between oil% and TDR-measured resistance. This suggests that TDR can be an effective device to measure the concentration of hydrocarbon compound in a soil.
현재 국내 외에서는 유류 지하 비축 공동, 식품 저장 공동 등과 같은 지하구조물 건설에 대한 관심이 증가하고 있다. 이러한 지하공동의 안정성을 평가할 때 형상비나 굴착면적을 비롯하여 지하공동이 굴착될 암반의 절리 발달 상태는 매우 중요하다. 따라서 본 연구는 형상비가 지하공동의 안정성에 미치는 영향을 안전율 중심으로 분석하였다 이를 위해 양호한 암반 내에 시공되는 공동의 네 가지의 형상비를 가정하고, 토피고, 측압계수, 절리의 간격, 강도 및 방향을 달리하여 민감도 분석을 실시하였다. 공동의 안정성은 강도감소기법을 이용하여 수치해석에 의해 얻은 안전율을 사용하여 평가되었다. 본 논문은 향후 불연속면을 포함한 암반에 시공되는 지하공동 설계 및 안정성 평가에 도웅이 될 수 있을 것으로 기대된다.
CO2 배출량 증가로 인한 지구온난화 심화에 대한 주요 대책으로 CO2를 포집하여 지중에 저장하는 이산화탄소 포집·저장(Carbon capture storage, CCS) 기술이 주목받고 있다. 최근 현무암의 거대한 체적, 높은 반응성, 풍부한 양이온 함량 등의 특성이 CO2 포획 및 저장 기작에 유리하게 작용한다는 사실이 부각되면서, 현무암층을 대상으로 하는 CO2 지중저장이 다양한 분야에서 연구되고 있다. 본 연구에서는 CO2 지중저장 기작, 현무암의 특성과 더불어 국외 연구 사례들을 조사 및 분석하여, 현무암 CO2 지중저장에 대한 타당성을 검토하였다. 조사한 사례들은 수행 방법을 기준으로 실험, 모델링, 현장 실증 연구로 분류하였다. 연구 사례별 실험 조건의 경우 온도는 20 ~ 250 ℃, 압력은 0.1 ~ 30 MPa, 암석-유체 간 반응 시간은 수 시간에서 4년까지 넓은 범위에서 진행되었다. 모델링 연구에서는 현무암 CO2 지중저장 후보지와 유사한 모델을 구축하여 CO2-유체 주입 전∙후 유체역학적 및 지화학적 요인들에 대한 변화를 살펴본 사례가 다수였다. 검토 결과, 현무암은 잠재 CO2 저장용량이 크고, CO2 광물화 반응이 빠르기 때문에 현무암 CO2 지중저장시 온도와 압력 및 지질구조와 같은 환경적인 제약이 적다. 현장 실증 사례인 CarbFix project, Wallula project가 성공적으로 수행되어 실증 수행가능성 또한 높게 평가되고 있다. 그러나 현무암 대상 CO2 지중저장에서 신중히 고려해야 할 점도 존재한다. 광물화 기작이 현무암의 조성, 주입 지역의 특성 등 여러 요인에 따라 결과가 상이하게 나타나고, 탄산염과 규산염 광물 등의 침전으로 인해 관정 주입성(injectivity) 저하가 발생할 수 있다. CO2 주입 시 저장층 내 압력 증가가 발생할 수 있으며 암석-CO2-유체 반응 과정에서 지중환경 오염의 위험성도 존재한다. 유체에 CO2를 용해시켜 주입하기 때문에 기존 방식과 다른 지중 모니터링 기술 또한 요구된다. 따라서, 현무암에서의 CO2 지중저장을 안정적이고 효율적으로 수행하기 위해서는 적합한 대상 지역을 선별하고, 해당 지역에 대한 여러 자료를 구축하여 이를 기반으로 한 다양한 실험, 모델링, 현장 실증 등의 체계적인 연구 수행이 필요하다.
지하공동의 거동은 굴착전에 암반에 존재하는 초기응력의 크기와 굴착에 따른 공동주변에서의 응력재분배에 많은 영향을 받는다. 암반과 같은 탄소성 재료인 경우 굴착으로 인한 공동주변의 거동은 응력경로의 영향을 받기 때문에 굴착방법과 순서 등에 따라 해석결과는 달라지게 된다. 따라서 지하 원자력발전소, 방사성폐기물 영구처분시설, 원유비축시설 등과 같은 대단면을 갖는 지하공동을 보다 합리적으로 설계하기 위해서는 해석과정에 굴착으로 인한 영향을 반영하는 것이 바람직하다. 본 연구에서는 굴착으로 인한 응력변화를 파악하기 위해서 유한요소법과 개별요소법에 의한 수치해석을 각각 수행하였다. 해석결과를 분석한후 합리적인 굴착단면형상, 굴착방법 및 순서, 지보효과, 다공동 굴착시 인접공동의 굴착으로 인한 영향 등을 검토하였다.
한국암반공학회 2000년도 암반공학문제의 수치해석(Numerical Analysis in Rock Engineering Problems)
/
pp.93-103
/
2000
지하저장공동에 설치되는 콘크리트 플러그는 가능한 모든 하중조건에 대해 안정하게 유지됨은 물론 저장된 유류의 외부 유출과 지하수의 과다 유입을 방지하는 기능을 수행하여야 하므로 지하 유류비축기지의 건설 및 운영 단계에서 매우 중요한 역할을 한다. 플러그가 시공되고 나면 외부와의 접촉이 모두 차단되게 되므로 플러그가 그 기능을 제대로 발휘하기 위해서는 설계단계에서부터 역학적 및 수리적 고려가 이루어져야한다. 따라서 본 연구에서는 2차원 및 3차원 유한 차분프로그램인 FLAC과 FLA $C^{3D}$를 사용하여 플러그에 대한 역학적 및 수리적 해석을 실시하였다. 먼저 측압계수의 변화, 심도의 변화, 플러그의 형상변화, 암반과 콘크리트 접촉면의 상태변화, 굴착손상권의 발생 등 다양한 조건하에서 플러그의 거동 변화에 대한 역학적 해석을 실시하였으며, 2차원 해석조건과 동일한 조건을 가진 3차원 모델을 구성하여 그 결과를 2차원 해석과 비교, 검토하였다. 또한 플러그의 쐐기깊이 변화에 따른 수리해석을 실시하여 그 결과를 비교하였다.다.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.