• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2006년도 추계 학술발표회 논문집
• /
• pp.337-340
• /
• 2006

The purpose of this study is to propose the stiffness reduction factor for flat plate slabs under lateral loads. Current design code (e.g., ACI 318-05) requires considering the effects of cracks for calculating slab stiffness under lateral loads. This study collected the test results of 20 interior slab-column connections, from which stiffness reduction in each test was estimated with respect to the ratio of applied moment to cracking moment ($M_a/M_{cr}$). Based on collected data, this study proposed equations for calculating stiffness reduction with respect to $M_a/M_{cr}$. To verify the proposed equations, this study conducted the experimental test of interior slab-column connections under quasi-static cyclic loading. From the test, load-deformation curve is compared to that obtained from effective beam width method with the proposed equation for the stiffness reduction. It is shown that the effective beam width method with the proposed equation for stiffness reduction predicts accurately the test results.

• Journal of the Korean Data and Information Science Society
• /
• 제28권4호
• /
• pp.947-955
• /
• 2017

A competing risk analysis has been applied when subjects experience more than one type of end points. Geskus (2011) showed three types of estimators of CIF are equivalent under left truncated and right censored data. We extend his approach to an interval censored competing risk data by using a modified risk set and evaluate their performance under several sample sizes. These estimators show very similar results. We also suggest a test statistic combining Sun's test for interval censored data and Gray's test for right censored data. The test sizes and powers are compared under several cases. As a real data application, the suggested method is applied a data where the feasibility of the vaccine to HIV was assessed in the injecting drug uses.

• 한국항해항만학회:학술대회논문집
• /
• 한국항해항만학회 2006년도 International Symposium on GPS/GNSS Vol.2
• /
• pp.279-283
• /
• 2006

The GPS receiver developed by KARI for the satellite launch vehicle should operate under severe dynamic environments such as high acceleration and jerk. Several terrestrial tests including the outdoor centrifuge test are planed in order to verify performances of the GPS receiver before flight. This paper deals with preliminary test results of the GPS receiver using a GPS signal generator before the centrifuge test that is a performance test of the GPS receiver using live GPS satellite signals. Test methods of the GPS receiver for the satellite launch vehicle under high centripetal acceleration and jerk utilizing a GPS signal generator are described. The simulation results are also analyzed in this paper.

• 한국정보처리학회논문지
• /
• 제4권11호
• /
• pp.2832-2839
• /
• 1997

본 연구에서는 Asynchronous Transfer Mode (ATM) 계층의 기능중 유휴 가상 채널에 프로토콜 프로토콜 적합성 시험 제어 기능을 갖게 하여 Test Coordination Procedures (TCP) 채널로 활용하는 방안을 제시하였다. 프로토콜 적합성 시험을 위하여 국제 기구에서 권고하고 있는 방법중 원격 시험 방법을 선택하면 System Under Test (SUT)측에 서 능동적으로 Test Event를 발생시켜야 하는 경우에 개발자가 직접 수동적으로 운용을 하거나, Implementation Under Test (IUT)에 대한 제어 및 관찰이 불가능한 경우도 발생하게 된다. ATM망에서 프로토콜 적합성 시험시 시험 영역(Test Coverage)을 최대화하고, 오류검출 영역(Fauit Coverase)을 극대화하기 위해서는 원격시험방법보다는 분산시험방법이 적절하며, 분산시험방법을 채택할 경우 TCP를 구현하기 위하여 시험정보를 전달하기 위한 채널을 확보하는 것이 요구된다. 본 고에서 제안하고 있는 방법은 오류 검출 영역을 극대화 시키고 오퍼레이터의 개입없이 시험의 자동화 구현이 용이하고, ATM장치의 정상동작에는 영향을 주지 않음은 물론 시험제어를 위한 별도의 채널을 확보하지 않고서도 분산시험방법을 적용할 수 있다는 점 을 특징으로 들 수 있다．

• 한국안전학회지
• /
• 제30권1호
• /
• pp.144-149
• /
• 2015

This study aims to quantitatively evaluate failure pressure of wall-thinned elbow under combined load along with internal pressure, by conducting real-scale burst test and finite element analysis together. For quantitative evaluation, failure pressure data was extracted from the real-scale burst test first, and then finite element analysis was carried out to compare with the test result. For the test, the wall-thinning defect of the extrados or intrados inside the center of 90-degree elbow was considered and the loading modes to open or close the specimen maintaining a certain load or displacement were applied. Internal pressure was applied until failure occurred. As a result, when the bending load was applied under the load control condition, the intrados of the defect was more affected by failure pressure than the extrados, and the opening mode was more vulnerable to failure pressure than the closing mode. When the bending load was applied under the displacement control, it was hardly affected by failure pressure though it was slightly different from the defect position. The result of the finite element analysis showed a similar aspect with the test. Moreover, when major factors such as material properties and pipeline thickness were calibrated to accurate values, the analytical results was more similar to the test results.

• Elastomers and Composites
• /
• 제51권4호
• /
• pp.308-316
• /
• 2016

The rubber materials are widely used in automobile industry due to their capability of a large amount of elastic deformation under a force. Current trend of design process requires prediction of functional properties of parts at early stage. The behavior of rubber material can be modeled using strain energy density function. In this study, five different strain energy density functions - Neo-Hookean model, Reduced Polynomial $2^{nd}$ model, Ogden $3^{rd}$ model, Arruda Boyce model and Van der Waals model - were used to estimate the behavior of carbon black added natural rubber under uniaxial load. Two kinds of tests - uniaxial tension test and biaxial tension test - were performed and used to correlate the coefficients of the strain energy density function. Numerical simulations were carried out using finite element analysis and compared with experimental results. Simulation revealed that Ogden $3^{rd}$ model predicted the behavior of carbon added natural rubber under uniaxial load regardless of experimental data selection for coefficient correlation. However, Reduced Polynomial $2^{nd}$, Ogden $3^{rd}$, and Van der Waals with uniaxial tension test and biaxial tension test data selected for coefficient correlation showed close estimation of behavior of biaxial tension test. Reduced Polynomial $2^{nd}$ model predicted the behavior of biaxial tension test most closely.

• 항공우주기술
• /
• 제7권1호
• /
• pp.161-169
• /
• 2008

본 논문에서는 KSLV-I 상단조립체에 대하여 수행된 시스템 인증수준의 전자파시험에서 GPS 수신기 시스템을 위한 시험 구성 및 운용 방법을 소개하고 성능분석 결과를 기술한 다. GPS 수신기 시스템은 이미 단품 수준에서 수차례의 설계 변경을 통하여 MIL-STD-461E 기준으로 규정된 KSLV-I 상단 전자장비 시험 규격을 만족함을 확인하였다. 시스템 인증수준으로 수행된 전자파시험에서 GPS 수신기 시스템은 다른 탑재물들과의 전자파적 간섭에도 정상적으로 동작하였으며 전계필드 입사 및 정전기 방전의 조건에서도 성능저하가 발생하지 않아 KSLV-I 상단 전자파환경 조건에서의 동작성이 검증되었다.

• 한국신뢰성학회지:신뢰성응용연구
• /
• 제12권3호
• /
• pp.139-152
• /
• 2012

Successive and simultaneous sudden death tests are compared with the complete and Type II censored samples in terms of expected test duration and Total Time on Test(TTT) subject to the same number of failures in order to maintain the equal statistical precision under Weibull lifetime distribution with known shape parameter. Also, two sudden death tests under a proposed cost model are discussed and a numerical example is provided to illustrate the use of the proposed cost model.

• Journal of the Korean Statistical Society
• /
• 제7권1호
• /
• pp.17-26
• /
• 1978

For testing $\beta_i=\beta, i=1,...,k$, in the regression model $Y_{ij} = \alpha_i + \beta_ix_{ij} + e_{ij}, j=1,...,n_i$, a simple and robust test based on Kendall's tau is proposed. Its asymptotic distribution is proved to be chi-square under the null hypthesis and noncentral chi-square under an appropriate sequence of alternatives. For the optimal designs, the asymptotic relative efficiency of the proposed procedure with respect to the least squares procedure is the same as that of the Wilcoxon test with respect to the t-test.

• Journal of the Korean Statistical Society
• /
• 제27권2호
• /
• pp.197-203
• /
• 1998

To test the hypothesis of complete or total independence for a multi-way contingency table, the Pearson chi-squared test statistic is usually employed under Poisson or multinomial models. It is well known that, under the hypothesis, this statistic follows an asymptotic chi-squared distribution. We consider the case where all marginal sums of the contingency table are fixed. Using conditional limit theorems, we show that the chi-squared test statistic has the same limiting distribution for this case.