Cemented Sand and Gravel(CSG)재료는 댐 수몰지로부터 쉽게 얻을 수 있는 하상자갈과 굴착토를 물, 시멘트와 함께 혼합한 재료를 총칭하는 것이다. 최근 일본에서는 가물막이댐과 본 댐 축조공사에 CSG 재료를 활용함으로써 댐 축조에 필요한 채석장 개발과 플랜트 건설에 투입되는 제반경비와 시공 공기를 줄일 수 있게 되었으며, 석산개발에 따른 환경훼손을 완화할 수 있게 됨으로써 경제성과 환경적 측면에서 그 활용성이 주목받고 있다. 본 연구에서는 CSG 재료의 기초적인 강도특성을 파악하기 위하여 단위시멘트량를 변화시켜 다짐시험, 일축압축시험 그리고 대형 삼축압축시험을 실시하고 단위 시멘트량과 재령에 따른 압축강도, 탄성계수 그리고 응력-변형특성 등을 검토하였으며 각 인자별 상관식을 제시함으로써 CSG 공법설계 및 해석에 필요한 기초적인 자료를 제공하고자 한다.
The importance of using materials cost effectively to enhance the strength and reduce the cost, and weight of earth fill materials in geotechnical engineering led researchers to seek for modifying the soil properties by adding proper additives. Lightweight fill materials made of soil, binder, water, and Expanded polystyrene (EPS) beads are increasingly being used in geotechnical practices. This paper primarily investigates the behavior of sandy soil, modified by EPS particles. Besides, the mechanical properties of blending sand, EPS and the binder material such as fly ash and cement were examined in different mixing ratios using a number of various laboratory studies including the Modified Standard Proctor (MSP) test, the Unconfined Compressive Strength (UCS) test, the California Bearing Ratio (CBR) test and the Direct Shear test (DST). According to the results, an increase of 0.1% of EPS results in a reduction of the density of the mixture for 10%, as well as making the mixture more ductile rather than brittle. Moreover, the compressive strength, CBR value and shear strength parameters of the mixture decreases by an increase of the EPS beads, a trend on the contrary to the increase of cement and fly ash content.
본 논문은 경량기포혼합토(LWFS)의 역학적 특성에 대하여 연구하였다. 경량기포혼합토는 단위중량의 감소와 압축 강도의 증가를 위하여 연안준설토, 고화제 및 기포를 혼합하여 제작되었다. 초기함수비, 고화제 함유율, 양생조건 및 구속압 등 다양한 조건으로 경량기포혼합토를 제작하여 일축 및 삼축압축시험을 실시하였다. 경량기포혼합토의 실험결과는 동일한 단위중량일 경우 응력-변형 거동과 압축강도는 준설토의 초기함수비보다 고화제 함유율에 더 영향을 받는 것으로 나타났다. 한편 삼축압축시험에서 응력-변형 관계는 양생조건에 관계없이 변형-연화거동을 나타내었다. 구속압에 따른 응력-변형 거동은 경량기포혼합토의 일축압축강도와 근접한 구속압을 경계로 다르게 변화하는 것으로 나타났다. 압축강도 200kPa 이상으로 지반개량을 하기 위해 요구되는 경량기포혼합토의 배합비는 준설토의 초기함수비 100%~160%와 고화제 함유율 6.6%로 나타났다.
이 연구에서는 경제적인 매립장 설계를 위해 점토차수재를 순환토사와 벤토나이트-폴리머 혼합 차수재로 활용하는 방안을 연구하였다. 순환토사는 모래가 90.58%이고 세립분이 1.88%이며 입도가 불량한 모래질 흙인 SP를 사용하였다. 순환토사는 벤토나이트를 4%, 6%, 8% 혼합하여 투수실험을 한 후 해성점토에 벤토나이트를 2%, 3%, 4% 혼합한 시료와 비교하였다. 점토는 3%에서 투수기준을 만족하였으며, 순환토사는 8%에서 투수기준을 만족하였다. 폐기물 매립장의 차수기준에 맞는 시료를 만들기 위해 벤토나이트 혼합비가 4%인 시료를 대상으로 폴리머를 0.16%, 0.24%, 0.28% 혼합하여 투수시험을 하였다. 동일한 혼합비로 일축압축시험을 하여 시방기준에 만족하는지 확인하였다. 벤토나이트 혼합비가 증가할수록 투수계수와 일축압축강도는 감소하였다. 폴리머 혼합시 강도는 초기에 증가한 후 일정한 값을 유지하였다. 폴리머 혼합시 벤토나이트 혼합비를 50% 이상 감소시킬 수 있음을 확인하였다. 폐기물매립장 바닥차수재로서 순환토사-벤토나이트-폴리머 혼합시료는 벤토나이트 혼합비 4%, 폴리머 혼합비 0.28%에서 투수계수는 1.0×10-7cm/sec 이하, 일축압축강도는 500kPa 이상을 만족하여 폐기물매립장의 혼합차수재로 활용이 가능함을 확인하였다.
In order to the influence of grain size distribution on compressive strength and coefficient of permeability, unconfined compression test and permeability test were performed for seventy samples that have various grain-size distributions. Its results are as follows: 1. Maximum unconfined compressive strength appears at the dry side of optimum moisture content. 2. Unconfined compressive strength is proportional to the increase of percent passing of No. 200 sieve. 3. Precent of deformation in failure increases in proportion to the increase of percent passing of No. 200 sieve, and modulus of No. 200 sieve, and modulus of deformation also increases in proportion to percent passing of No. 200 sieve. 4. Unconfined compressive strength increases in proportion to uniformity coefficient, liquid limit and plastic index, but it decreases gradually according to the increase of coefficient of grading and classification area. 5. Maximum dry density decreases according to the increase of void ratio. 6. Coefficient of permeability decreases according to the increase of percent passing of No. 200 sieve, and when percent of No. 200 sieve, and when percent passing of No. 200 enlarged more than 40%, it becomes less than $10^{-6}cm/sec$ which is the limit of coefficient of permeability of core material for earth dam proposed by Lee. 7. Coefficient of permeability increases according to the increase of coefficient of grading, classification area and index of Talbot formula r, but it was rather decrease by the increase of uniformity coefficient. 8. Coefficient of permeability seems to depend on the size and the shape of the flow path which is a series of void to be concerned by the size and the proprton of soil grain, even though void ratios are same.
화학적 첨가제를 이용한 안정처리는 지반의 강도증가 및 변형발생을 제어하기 위한 방법으로 깊은 심도까지 광범위하게 적용되어 지고 있다. 화학적 안정처리의 기본목적은 지반의 강도증가, 압축성 감소, 팽창특성 등을 개선하여 지반의 내구성을 증가시키는 것이며, 최근 들어 환경친화적이며 혼합체의 특성 및 혼합속도를 효율적으로 개선한 다양한 형태의 진보적인 시멘트 혼화재가 개발되고 있다. 본 연구에서는 농어촌도로(농도)의 효율적인 포장공법 개발을 위하여 시멘트혼화재를 활용하는 방안을 연구하였으며, 혼화재 종류 및 배합비에 따른 다짐시험, 일축압축강도시험, 동결융해시험 및 휨강도시험을 실시하였다. 본 연구결과에 따르면, 실트질 원지반토가 점토지반에 비해 강도증가 및 동결융해특성이 우수하며, 액상형 시멘트 혼화재가 분말형태 보다 효과적인 것으로 나타났다. 또한 저배합에서도 고강도의 품질을 발휘하여 농어촌도로 표층 내구성 저하를 개선할 수 있을 것으로 판단된다.
C.S.G(Cemented Sand and Gravel) 재료는 댐 수몰지로부터 쉽게 얻을 수 있는 굴착토와 하상자갈에 소량의 시멘트와 물을 혼합한 재료를 총칭하는 것으로 최근 댐, 도로, 호안등의 건설재료로 그 활용성이 점차 증가하고 있다. 통상적으로 C.S.G 재료의 강도특성은 입도분포, 단위시멘트량, 재령, 그리고 함수비 등과 같은 여러 가지 요소에 의하여 영향을 받는 것으로 보고되고 있다. 본 연구에서는 화북댐 유역의 하상자갈을 3가지 종류의 입도분포로 재구성하여 재령, 단위시멘트량 그리고 함수비의 혼합 비율에 따른 일축압축강도의 변화를 연구하였다. 실험결과 C.S.G 재료의 일축압축강도는 상기 영향 인자들에 의하여 다양하게 영향을 받았으며, 특히 입도분포와 단위수량은 C.S.G 재료의 강도를 결정하는데 매우 중요한 인자임을 알 수 있었다. 또한 이러한 실험적 결과를 토대로 각 영향인자를 고려한 강도 예측식을 제안함으로써 설계 및 시공에 필요한 기초적인 자료를 제공하고자 한다.
Four full-scaled partially confined and unconfined masonry panels were tested with monotonic lateral loads. To study the effects of vertical force and boundary columns, two specimens with no boundary columns were subjected to different vertical forces, while two wing-wall specimens had the column placed eccentrically and in the middle, respectively. The specimens with no boundary columns exhibited ductile rocking behavior, where the lateral strength increased with increasing vertical compression. The wing-wall specimens with columns behaved as strut-and-tie systems. The column-panel interaction resulted in greater strength, lower deformation capacity and differences in failure modes. A comparison with analytical models showed that rocking strength can be accurately estimated using vertical force and the panel aspect ratio for panels with no boundary columns. The estimation for lateral strength on the basis of a panel section area indicated scattered error for wing-wall specimens.
소일 시멘트 혼합토의 역학적 성질을 파악할 수 있는 인자로서는 일축압축강도로 기존 연구사례에서 제시되었다. 본 연구에서는 저소성실트를 이용한 시멘트 혼합토의 일축압축강도 시험을 통해 실트함수비, 재령일, 시멘트 함유율에 대한 역학적 변화를 분석하였으며, Abrams가 제안한 B계수에 대한 변화를 기존연구사례와 비교 분석 및 시멘트 혼합토의 일축압축강도 예측식도 제안하였다. 상수 B계수값은 토질의 특성 및 재령일 등에 따라 변화였으며, B계수 변화의 적정성 여부를 일축압축강도로 분석한 결과 변수형태의 고려가 적정한 것으로 나타났다. Abrams 방정식을 적용하고 재령일, 시멘트 함유율과 재령일을 고려한 저소성실트 혼합토의 일축압축강도 예측식을 제안하였다.
Ajamzadeh, M.R.;Sarfarazi, Vahab;Haeri, Hadi;Dehghani, H.
Smart Structures and Systems
/
제22권6호
/
pp.643-662
/
2018
One of the methods for investigation of mechanical behavior of materials is numerical simulation. For simulation, its need to model behavior is close to real condition. PFC is one of the rock mechanics software that needs calibration for models simulation. The calibration was performed based on simulation of unconfined compression test and Brazilian test. Indeed the micro parameter of models change so that the UCS and Brazilian test results in numerical simulation be close to experimental one. In this paper, the effect of four micro parameters has been investigated on the uniaxial compression test and Brazilian test. These micro parameters are friction angle, Accumulation factor, expansion coefficient and disc distance. The results show that these micro parameters affect the failure pattern in UCS and Brazilian test. Also compressive strength and tensile strength are controlled by failure pattern.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.