• IEMEK Journal of Embedded Systems and Applications
• /
• v.11 no.1
• /
• pp.1-8
• /
• 2016

We proposed a load unbalancing scheduling method for energy-efficient multi-core embedded systems considering DVFS (Dynamic Voltage/Frequency Scaling) power consumption and task characteristics. It is a new kind of scheduler which combines load balancing and load unbalancing technique. The purpose of the method is to effectively utilize energy without much effect in performance. In this paper, we conduct experiments on energy consumption and performance using the previous load balancing and unbalancing techniques and our proposed technique. The proposed technique reduced energy consumption more than 13.7% when compared to other algorithms. As a result, the proposed technique shows low energy consumption without much decline in the performance and is adequate for energy-efficient multi-core embedded systems.

• Journal of Power Electronics
• /
• v.13 no.5
• /
• pp.877-883
• /
• 2013

This paper discussed a transformer-less shunt static synchronous compensator (STATCOM) with consideration of the following aspects: fast compensation of the reactive power, harmonic cancelation and reducing the unbalancing of the 3-phase source side currents. The STATCOM control algorithm is based on the theory of instantaneous reactive power (P-Q theory). A self charging technique is proposed to regulate the dc capacitor voltage at a desired level with the use of a PI controller. In order to regulate the DC link voltage, an off-line Genetic Algorithm (GA) is used to tune the coefficients of the PI controller. This algorithm arranged these coefficients while considering the importance of three factors in the DC link voltage response: overshoot, settling time and rising time. For this investigation, the entire system including the STATCOM, network, harmonics and unbalancing load are simulated in MATLAB/SIMULINK. After that, a 35KVA STATCOM laboratory setup test including two parallel converter modules is designed and the control algorithm is executed on a TMS320F2812 controller platform.

• Journal of the military operations research society of Korea
• /
• v.22 no.2
• /
• pp.113-125
• /
• 1996

'Bowl Phenomenon' refers to allocating the work loads to middle stages slightly less than the outer ones in a series production system. Millier and Boling(1966) first discovered that the output rate of a production line were obtained by deliberately unbalancing, like a bowl-shape, under certain circumstances. So far quite a many researches have been studied either theory-oriented or simulation-oriented on this topic. However the papers concerning assemble production line are rather rare possibly due to the system complexity. In this paper, a simulation work on a 6-node assembly line has been conducted with the help of SLAMSYSTEM software. The simulation results have been turned out that 1) the Bowl phenemenon is still valid in the given system, 2) buffer storage between the work stations are critical measure for determining the degree of work-load unbalancing.

• Proceedings of the Korean Information Science Society Conference
• /
• 2000.04a
• /
• pp.394-396
• /
• 2000

Currently, lots of research s going on in the field of the load distribution within HTTP. RR-DNS and SWEB are the most representative load distribution research. But, there are still many problems: unbalancing of load, load increase of web server and cost increase. Also, clients that require lots of data like multimedia happens to increase network load. To solve these, research about client/agent/server architecture is going on. But, the clients must know the agent's address and there are complexity and migration problems for design of such as protocol. This paper proposes TBSMS that is capable of choosing the optimal server considering the service capacity of the server as well as the network load. This paper demonstrates that TBSMS uses the web to solve the problem that client must know the agent's address and uses SNMP to solve the complexity and migration problem.

• IE interfaces
• /
• v.19 no.1
• /
• pp.1-8
• /
• 2006

The mobile communication network has to offer good quality of services (QoS), high capacity, and more coverage at a lower cost. However, with the increase of cellular user, the shortage of capacity due to unbalanced call distribution and lack of QoS are common. This paper deals with dynamic sectorization for efficient resource management to solve load unbalancing among microcells in CDMA (Code Division Multiple Access) microcellular system. Dynamic load balancing can be effected by grouping micro-cells properly and grouping can be developed through a routing mechanism. Therefore, we use ants and their routes to choose the optimum grouping of micro-cells into sectors using Multiple Ant Colony System (MACS)in this paper.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.27 no.5
• /
• pp.417-424
• /
• 2022

This study proposes a current-balancing technique for an interleaved buck converter using a variable inductor and a snubber capacitor. The proposed scheme balances the inductor current by using the variable inductor and enables zero voltage switching under all load ranges. With the variable inductor, the ripple of inductor current changes according to load variation. In addition, a 1.6 kW prototype is built to verify the validity of the proposed scheme, and the experimental results are successfully obtained.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.21 no.6
• /
• pp.486-496
• /
• 2016

The voltage unbalance of an LVDC bipolar distribution system was controlled for high power quality. Voltage unbalance may occur in a bipolar distribution system depending on the operation of the converter and load usage. Voltage unbalance can damage sensitive load and lead to converter accidents. The conditions that may cause voltage unbalance in a bipolar distribution system are as follows. First, three-level AC/DC converters in bipolar distribution systems can lead to voltage unbalance. Second, bipolar distribution systems can be at risk for voltage unbalance because of load usage. In this paper, the output DC link of a three-level AC/DC converter was analyzed for voltage unbalance, and the bipolar voltage was controlled with algorithms. In the case of additional voltage unbalance according to load usage, the bipolar voltage was controlled using the proposed converter. The proposed converter is a dual half-bridge converter, which was improved from the secondary circuit of a dual half-bridge converter. A control algorithm for bipolar voltage control without additional converters was proposed. The balancing control of the bipolar distribution system with distributed power was verified through experiments.

• Journal of KIISE:Computer Systems and Theory
• /
• v.33 no.3
• /
• pp.193-204
• /
• 2006

In most existing distributed Web systems, incoming requests are distributed to servers via Domain Name System (DNS). Although such systems are simple to implement, the address caching mechanism easily results in load unbalancing among servers. Moreover, modification of the DNS is necessary to load considering the server's state. In this paper, we propose a new dynamic load balancing method using dynamic DNS update and round-robin mechanism. The proposed method performs effective load balancing without modification of the DNS. In this method, a server can dynamically be added to or removed from the DNS list according to the server's load. By removing the overloaded server from the DNS list, the response time becomes faster. For dynamic scheduling, we propose a scheduling algorithm that considers the CPU, memory, and network usage. We can select a scheduling policy based on resources usage. The proposed system can easily be managed by a GUI-based management tool. Experiments show that modules implemented in this paper have low impact on the proposed system. Furthermore, experiments show that both the response time and the file transfer rate of the proposed system are faster than those of a pure Round-Robin DNS.

• Journal of the Korea Computer Graphics Society
• /
• v.2 no.1
• /
• pp.24-30
• /
• 1996

The ray tracing method, which is one of many photorealistic rendering techniques, requires heavy computational processing to synthesize images. Parallel processing can be used to reduce the computational processing time. A parallel algorithm for the ray tracing has been implemented and executed for various images on transputer systems. In order to develop a scalable parallel algorithm, a processor farming technique has been exploited. Since each image is divided and distributed to each farming processor, the scalability of the parallel system and load balancing are achieved naturally in the proposed algorithm. Efficiency of the parallel algorithm is obtained up to 95% for nine processors. However, the best size of a distributed task is much higher in simple images due to less computational requirement for every pixel. Efficiency degradation is observed for large granularity tasks because of load unbalancing caused by the large task. Overall, transputer systems behave as good scalable parallel processing system with respect to the cost-performance ratio.

• Journal of KIISE:Information Networking
• /
• v.35 no.5
• /
• pp.384-394
• /
• 2008

A wireless router is a device which allows several wireless clients to share an internet line using NAT (Network Address Translation). In a school or a small office environment where many clients use multiple wireless routers, a client may select anyone of wireless routers so that most clients can be clustered to a small set of the wireless routers. In such a case, there exists load unbalancing problem between clients and wireless routers. One of its result is that clients using the busiest router get poor service. The other is that the resource utilization of the whole wireless routers becomes very low. In order to resolve the problems, we propose a load sharing scheme to maximize network bandwidth utilization based on multiple SSID. In a time internal, the proposed scheme keeps to show the available bandwidth information of all the possible wireless routers to clients through multiple SSID. A new client can select the most available band with router. This scheme allows to achieve a good load balancing between clients and routers in terms of bandwidth utilization. We implemented the proposed scheme with ASUS WL 500G wireless router and performed experiments. Experimental results show the bandwidth utilization improvement compared to the existing method.