• Proceedings of the KIPE Conference
• /
• 2009.11a
• /
• pp.200-202
• /
• 2009

본 논문은 계통전압 불평형시 이중여자 유도형 풍력발전기 (Doubly Fed Induction Generator-DFIG)의 토크 리플 저감과 dc-link 전압의 맥동을 제거하는 기법을 제안한다. 계통전압 불평형 시 DFIG의 동적 모델링을 통해 토크 맥동 성분과 dc-link 전압 리플 성분을 수식화 한다. 유도된 수식을 기반으로 회전자 측 컨버터는 정상분과 역상분을 독립적으로 제어하는 듀얼 전류 제어기를 통해 토크 리플을 저감하며, 계통 측컨버터는 전력이론을 통해 계산된 보상 전류 지령치를 통해 cd-link 전압 맥동을 제거한다. 3kW급 풍력 발전 시스템에 제안하는 기법을 적용한 시뮬레이션 결과를 통해 타당성을 입증한다.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1995.10a
• /
• pp.813-817
• /
• 1995

Structural analysis of horizontal cold chamber die casting machine is performed by the FEM. The analyzed model is made up of stationary die platen,movable die platen,link housing platen, C-frame, and tie bar which mainly undertake die locking force and injection force. In modeling, compression gap elements are used for to simulate contacting condition between tie bar and movable die platen, movable die platen and base frame, and link housing and base frame. Unbalanced die locking force imposed on four tie bars are considered. As the results, the deformed shape and the stresses of the die casting machine are given.

• Microbiology and Biotechnology Letters
• /
• v.23 no.2
• /
• pp.220-228
• /
• 1995

For polyhydroxyalkanoic acid (PHA) production, several microorganisms were isolated from sewage sludge. One of them, GB-77 strain, was chosen from its PHB/HV copolymer production on only fructose without cosubstrate. The isolated strain GB-77 was identified as the genus Alcaligenes. Optimal temperature and pH for cell growth were 36C and 6.8. Optimal medium composition was 10 g/l of fructose and 5 g/l of polypeptone, 1 $\times$ 10$^{-2}$M Na$^{2}$HP0$^{4}$, 1.3 $\times$ 10$^{-2}$M KH$^{2}$PO$^{4}$. To investigate the optimal condition for polyhydroxyalkanoic acid production two-stage culture technique was used; first stage for cell growth and second stage for PHA production on unbalanced growth conditions. Optimal conditions for high PHA production were C/N ratio 50, temperature 36$\circ$C and pH 6.8. To overcome fructose inhibition on cell growth, intermittent feeding fed-batch culture technique was used. Total cell concentration was 17.4 g/l with 9.1 g/l of PHA. The purified PHA was identified PHB/HV copolymer by NMR analysis.

• The Transactions of the Korean Institute of Electrical Engineers A
• /
• v.53 no.7
• /
• pp.397-404
• /
• 2004

This paper describes a study of transient characteristics in 765kV untransposed transmission lines. As the 765(kV) system can carry bulk power, some severe fault on the system nay cause large system disturbance. The large shunt capacitance and small resistance of 765kv transmission line make various difficulties for its protection. These problems including current difference between sending and receiving terminals on normal power flow, low order harmonic current component in fault current and current transformer saturation due to the long DC time constant of the circuit etc. must be investigated and solved. The analysis of transient characteristics at sending terminal has been carried out for the single phase to ground fault and 3-phase short fault, etc. The load current, charging current in normal condition and line flows, fault current, THD(Total Harmonic Distortion) of harmonics, time constants have been analysed for the 765kV untransposed transmission line systems.

• Journal of Mechanical Science and Technology
• /
• v.15 no.7
• /
• pp.831-838
• /
• 2001

Torque ripple control of brushless DC motor has long been the main issue of the servo drive systems in which the speed fluctuation, vibration and acoustic noise need to be minimized. The vast majority of the methods for suppressing the torque ripple require the Fourier series analysis and either the iterative or least mean square minimization. In this paper, a novel approach based on the d-q-0 reference frame that achieves ripple-free torque control with maximum efficiency is presented. The proposed method optimizes the reference phase current waveforms including even the case of 3-phase unbalanced condition, and the motor winding currents are controlled to track the optimized current waveforms by the delta modulation technique. As a results, the proposed approach provides a simple and yet effectine means for obtaining the optimal motor excitation currents. The validity and applicability of the proposed control scheme are verified through simulations and experimental investigations.

• Journal of Institute of Control, Robotics and Systems
• /
• v.5 no.7
• /
• pp.862-867
• /
• 1999

In general, the realization of high performance brushless permanent magnet motors which are widely used in servo drive is focused on the linear control for ripple-free torque. This is also the main problem that should be solved in all AC motors including induction motor to achieve high performance control, and recent papers deal with this problem. In this paper, the novel optimal excitation scheme of brushless permanent magnet motor producing loss-minimized ripple-free torque based on the d-q-0 reference frame is presented including 3 phase unbalanced condition. The optimized phase current waveforms that are obtained by the proposed method can be a reference values and the motor winding currents are forced to track it by delta modulation technique. As a results, it can be shown that the proposed work can minimize the torque ripple by the optimal excitation current for brushless permanent magnet motor with any arbitrary phase back EMF waveform. Simulation and experimental results prove the validity and practical applications of the proposed control scheme.

• Journal of Power Electronics
• /
• v.2 no.3
• /
• pp.162-170
• /
• 2002

Voltage sag detection algorithm for voltage sag corrector is proposed in this paper. To quantify the standard of voltage unbalance under the faulted conditions, the 3-phase unbalanced voltages are decomposed into two balanced 3-phase symmetrical components of the positive and negative sequence voltages, which is defined by the magnitude factor (MF) and unbalance factor (UF). It is analyzed that MWF and UF values are given as the dc constant values even though under the voltage unbalance condition. This paper also proposes the control scheme of the instantaneous voltage sag corrector based on this detection algorithm. The validity of the proposed algorithm is verified through the EMTDC simulation and experiments.

• Proceedings of the KIPE Conference
• /
• 2003.11a
• /
• pp.193-196
• /
• 2003

For a power source of usual electronic devices such as PDA, smart phone, UPS and electric vehicle, the battery made of serially connected multiple cells is generally used. In this case, if there are some unbalanced among cell voltages, the total lifetime and the total capacity of the battery are limited to a lower value. To maintain a balanced condition in cells, an effective method of regulating the cell voltage in indispensable. In this paper introduced a method for battery balancing system using dissipation in the resistance.

• Proceedings of the KIPE Conference
• /
• 1998.10a
• /
• pp.502-505
• /
• 1998

In this paper, the new vector control scheme of BLDCM producing loss-minimized ripple-free torque based on the d-q-Ο reference frame is presented including 3 phase unbalanced condition. The optimized phase current wave-forms that are obtained by the proposed method can be a reference values and the motor winding currents are forced to track it by delta modulation technique. As a results, it can be shown that the proposed work provides a simple and clear way to obtain an optimal motor excitation current.

• Proceedings of the KIPE Conference
• /
• 2010.07a
• /
• pp.332-333
• /
• 2010

The 5kW SOFC(Solid Oxide Fuel Cell) System is composed to 3kW parallel Fuel Cell. We propose to the parallel control of 5kW PCS in the unbalance condition of fuel cell. The developed 5kW PCS can be found control ability of DC/DC converters in the operating conditions of the unbalanced parallel operation. It is verify to the control characteristics by simulation and experiment.