• Journal of the Korean Home Economics Association
• /
• v.46 no.10
• /
• pp.1-9
• /
• 2008

The purpose of this study was to increase uv-cut ability of cotton, ramie, and rayon fabrics dyed with safflower red colorants. For this purpose, samples treated with uv-cut agent and tannic acid were compared with the untreated samples after ultraviolet(uv)-light exposure in terms of K/S value, color changes(${\Delta}E$), SEM, and tensile strength retention. K/S value rapidly decreased with increasing exposure time, but K/S value of the samples treated with both uv-cut agent and tannic acid decreased less than that of untreated samples. As increasing exposure time, $L^*$ and $b^*$ increased, $a^*$ decreased, and so ${\Delta}E$ increased, indicating less red character and more yellow character in color. This leads to change hue, value and chroma value. But color change of samples treated with both uv-cut agent and tannic acid was less than that of untreated samples. SEM pictures showed a severe degradation by uv exposure in all samples. Tensile strength slowly decreased for 21 days. And after this point, the decreased proceeded more rapidly. Tensile strength retention of the samples treated with uv-cut agent and tannic acid was higher than that of untreated samples.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.31 no.5 s.164
• /
• pp.659-669
• /
• 2007

The purpose of this study was to investigate the degradation of silk fabrics dyed with gardenia and sappanwood by Ultraviolet Light(UV). To asses the effect of uv on dyed silk fabrics, physical and chemical properties of samples were explored. K/S value rapidly decreased with increasing exposure time. Mordanting improved ultraviolet-cut ability and the sappanwood dyed samples were superior to those of gardenia dyed in ultraviolet-cut ability. Color progressively faded away as uv exposure time increased, accordingly, $L^*,\;a^*,\;b^*$, H/VC, ${\Delta}E$ were changed. Morphological change observed with SEM represented degradation of silk fabrics from the outer fibril to the inner fibril. Tensile Strength abruptly decreased as uv exposure time increased and the mordanted samples showed higher tensile strength than the unmordanted. FT-IR analysis confirmed that main peaks at 3297 and $1704cm^{-1}$ band for silk fabric were due to N-H and C=O stretching, gardenia peaks at 1654 and $668cm^{-1}$ band representing C=O(ester), C=C(alken) and O-C=O(carboxylic acids) of crocin and sappanwood peaks at $1715cm^{-1}$ band representing C=O(cyclic keton) of brazilin appeared on the samples exposed for 14 days, but these peaks indicating colorants after 28 days of uv exposure faded away due to prolonged exposure of uv.

• Textile Coloration and Finishing
• /
• v.25 no.3
• /
• pp.194-205
• /
• 2013

In this study, we report dyeing properties and functionality of cotton and silk fabrics dyed with methanol extract from Juniperus chinensis heartwood. Non-aqueous dye of Juniperus chinensis heartwood extracted with methanol was expressed reddish color. It showed relatively good affinity to silk than cotton. Dye uptake of cotton and silk continued to increase according to the increase of the dye concentration. Cotton was not affected by the dyeing temperature and time, however, dye uptake of silk was increased as the dyeing time and temperature were increased. Dye uptake of cotton and silk were the highest at pH 8 and pH 6 respectively. Dyed fabrics showed various colors depending on mordant types and mordant concentration. Washing, light and perspiration fastness were not good. However, rubbing and dry cleaning fastness showed relatively good grade. Dyed fabrics of ultraviolet-cut ability and deodorant ability were improved. Also, dyed fabrics showed very good antimicrobial abilities of 99.9%.

• Textile Coloration and Finishing
• /
• v.25 no.3
• /
• pp.181-193
• /
• 2013

The purpose of this study is to investigate dyeing properties and functionality of cotton and silk fabrics dyed with hot-water extract from Juniperus chinensis heartwood. Water-soluble dye of Juniperus chinensis heartwood extracted with distilled water was expressed YR color series. Dye uptake of cotton continued to increase according to the increase of the dye concentration. Its variation trends were shown to be similar to the isothermal absorption curve of the Freundlich. Dye uptake of silk was better than cotton, increased depending on increasing concentration of the dye, dyeing time and temperature. Its variation trends were shown to be similar to the isothermal absorption curve of the Langmuir. As the pH increased, the dye uptake of fabrics reduced and showed increased on red tinge. Colors of the dyed fabrics were various, depending on dye concentration and the mordant type and mordant concentration. Washing fastness, light fastness and perspiration fastness were not good. However, rubbing and dry cleaning fastness showed relatively good grade. Dyed fabrics of ultraviolet-cut ability and deodorant ability were improved. And dyed fabrics showed antimicrobial abilities of 99.9% against Staphylococcus aureus.

• Journal of Korean Dental Science
• /
• v.5 no.2
• /
• pp.60-67
• /
• 2012

Purpose: To test the apical leakage prevention performance of three different materials through protein leakage procedures using bovine serum albumin (BSA) and Bradford protein reagent. Materials and Methods: A total of 60 human single-rooted teeth were divided into 4 groups, and conventional root canal filling was done. The root was cut 3 mm from the apex, and a cavity was formed. Proroot MTA (MTA), Fuji II LC (GI), Fuji II LC with XP bond (GIA), and Caviton (CA) were used as experimental materials to fill the cavity in a retrograde filling manner. The extent of BSA leakage was then measured with a ultraviolet visible spectrophotometer 24, 48, and 72 hours after filling. Result: After 24 hours, among the 15 teeth of each group, 2 in MTA, 4 in GI, 3 in GIA, and 7 in CA showed leakage. After 48 hours, 3 in MTA, 5 in GI, 5 in GIA, and 10 in CA had leakage and discoloration. After 72 hours, among the 15 teeth of each group, 3 in MTA, 6 in GI, 5 in GIA, and 10 in CA showed leakage. The leakage in the CA group was greater than that in the MTA group at 48 and 72 hours based on Fisher's exact test (P=0.025), and the difference was statistically significant. Similarly, the leakage in the CA group was greater than that in the MTA group over time based on the Kaplan-Meier survival estimate (P=0.011), and the difference was statistically significant. Conclusion: Glass ionomer, glass ionomer after adhesive application, and MTA all showed leakage. Caviton showed greater leakage compared to MTA 48 and 72 hours after filling, and the difference was statistically significant; thus suggesting that Caviton is not appropriate as retrograde filling material considering its sealing ability.

• Korean Journal of Human Ecology
• /
• v.19 no.4
• /
• pp.699-707
• /
• 2010

Catechu is widely used as in natural dyeing as well as in various medicines and tannage. This study investigated the dyeing properties and functionality of Catechu through a series of dyeing experiments using cotton fabric. It was shown that the absorbance of Catechu solution has two peaks at 220nm and 280nm. Thus, it can be concluded that the color constituent of Catechu is a catechol tannin and color tone is YR. The dyeability of Catechu increases as the concentration of the dye is increased. Its variation was shown to be similar to the isothermal absorption curve of the Freundlich. As dyeing time was increases, the dyeability did not change significantly after the 30 minute mark was passed. At high temperatures the dyeability was shown to increase. As the dyeing temperature was increased the color of dyeing fabrics changes from Y and YR to R. Experiments with pre-mordanting method showed that various colors can be obtained using Catechu. Cotton is effective in using K, Cu, Fe mordants, and the dyeability was shown to be improved with low pH. Both washing fastness and light fastness were shown to be low. However, the fabric color gradually changed to red was due to mailard reaction of catechol tannin causing by repeated washing and sunlight. The ultraviolet-cut ability was improved for cotton fabric dyed with Catechu. Also, dyed fabric with Catechu showed very good antimicrobial abilities at 99.9%.

• Clean Technology
• /
• v.11 no.3
• /
• pp.123-128
• /
• 2005

Among various metal oxides semiconductors, $TiO_2$ is the most studied semiconductor for environmental clean-up applications due to its unique ability in photocatalyzing various organic contaminants, its chemical inertness, and nontoxicity. $TiO_2$, however, has a few drawbacks to be solved such as reactivity mainly working under ultraviolet irradiation (${\lambda}$ < 387 nm) and electron - hole recombination on $TiO_2$. In this study, to extend the absorption range of $TiO_2$ into the visible range and enhance electron - hole separation, we synthesized platinum (Pt) deposited $C-TiO_2$. The presence of Pt as an electron sink has been known to snhance the separation of photogenerated electron-hole pairs and induce the thermal decomposition. The characterization of as-synthesized $Pt-C-TiO_2$ was performed by Transmission Electron Microscopic (TEM), the Brunuer-Emmett-Teller (BET) method, X-ray Diffractometer (XRD), UV-vis spectrometer (UV-DRS), and X-ray Photoelectron Spectroscopy (XPS). In order to estimate the photocatalytic activity of the synthesized materials, the photoelectron Spectroscopy (XPS). In order to estimate the photocatalytic activity of the synthesized materials, the photodegradation experiment of an azo dye (Acid Red 44; $C_{10}H_7N=NC_{10}H_3(SO_3Na)_2OH$)was carried out by using an Xe arc lamp (300 W, Oriel). A 420 nm cut-off filter was used for visible light irradiation. From the results, Pt-deposited $C-TiO_2$ showed a far superior phothdegradation activity to Degussa P25, the commercial product under the irradiation of visible light and enhanced photocatalytic activity of visible-working $C-TiO_2$. This is a useful result into the application for the purification system of dye wastewater using visible energy of sun light.