• 제목/요약/키워드: Ultraviolet(UV) microscopy

검색결과 87건 처리시간 0.026초

자외선 조사에 따른 모발의 물리화학적 변화에 관한 연구 (Study on the Physicochemical Change of Human Hair Shaft Following Radiation with Ultraviolet)

  • 장병수;나수경;이귀영
    • Applied Microscopy
    • /
    • 제36권2호
    • /
    • pp.109-118
    • /
    • 2006
  • 자외선 B를 사람의 두피에서 채취한 모발에 6시간, 12시간, 24시간. 48시간 동안 각각 조사한 후 모발의 미세구조적인 변화 과정과 모발 단백질의 분해에 의한 원소 성분의 함량 변화를 전자현미경 및 에너지분산분광분석기를 이용하여 분석하였다. 자외선에 6시간 조사된 모발에서 모발 표면은 중첩된 큐티클층이 분리되어 있거나 부러져있는 상태로 나타났다. 큐티클세포의 내큐티클에는 직경이 30nm에서부터 700nm크기의 공포를 형성하고 있었다. 자외선에 12시간 조사된 모발에서 피질은 치밀하게 배열되어 있는 각화세포의 세포막이 파괴되어 공포가 형성되었는데 공포는 세포막을 따가서 일렬로 배열되어 있었다. 또한, 멜라닌 과립과 접촉하고 있는 거대원섬유에서 공포가 형성되어 멜라닌 과립과 분리되는 것을 확인할 수 있었다. 이 시기에도 멜라닌 과립의 모양이나 크기의 변화는 나타나지 않았다. 자외선에 24시간 조사된 모발에서 큐티클세포들은 절단된 상태로 관찰되었고 세포질의 내큐티클에 형성된 공포들은 인접해 형성된 공포들과 융합되었다. 자외선에 48시간 조사된 모발은 표면이 거칠게 나타났고, 큐티클의 안쪽 층에 있는 세포에서부터 형성된 공로로 인해 위쪽에 있는 큐티클 세포는 들뜨면서 조각나 떨어져 나갔다. 자외선 조사를 받아 손상된 모발의 원소성분을 에너지 분산 분광분석기로 분석한 결과 정상모발 보다 산소성분의 함량이 높게 나타났으나 황의 성분은 감소되었다.

자외선을 처리한 목재 플라스틱 복합재의 물리 및 역학적 성질 평가 (Evaluation on Physical and Mechanical Properties of Wood Plastic Composites Treated under Ultraviolet Irradiation)

  • 이종신;김성준
    • 한국가구학회지
    • /
    • 제26권4호
    • /
    • pp.428-434
    • /
    • 2015
  • In this study, we received each wood plastic composites (WPC) from three manufacturers. These WPCs were evaluated regarding their physical and mechanical properties of both before and after accelerated weathering by ultraviolet (UV) irradiation. The total time of exposure of the WPCs to UV irradiation was 1800 h. The water absorption, volumetric swelling and shrinkage of WPCs did not affected by UV irradiation. Among the mechanical properties, there was no significant differences in bending strength and screw withdrawal resistance of UV treated WPCs compared with those of reference WPCs. However, surface hardness of WPCs showed decrease under UV irradiation. Stereoscopic microscopy observation revealed deterioration of the surface layer polymer in all weathered WPCs by UV. Exposure of the WPCs to UV irradiation caused decomposition and disappearance of the polymer layer. From this result, we can estimate that damage of polymer by UV led to a decrease in the surface hardness of the WPCs. The wood flours retained original shape after accelerated weathering by UV irradiation.

Impact of UV-C Irradiation on Bacterial Disinfection in a Drinking Water Purification System

  • Hyun-Joong Kim;Hee-Won Yoon;Min-A Lee;Young-Hoon Kim;Chang Joo Lee
    • Journal of Microbiology and Biotechnology
    • /
    • 제33권1호
    • /
    • pp.106-113
    • /
    • 2023
  • The supply of microbiological risk-free water is essential to keep food safety and public hygiene. And removal, inactivation, and destruction of microorganisms in drinking water are key for ensuring safety in the food industry. Ultraviolet-C (UV-C) irradiation is an attractive method for efficient disinfection of water without generating toxicity and adversely affecting human health. In this study, the disinfection efficiencies of UV-C irradiation on Shigella flexneri (Gram negative) and Listeria monocytogenes (Gram positive) at various concentrations in drinking water were evaluated using a water purifier. Their morphological and physiological characteristics after UV-C irradiation were observed using fluorescence microscopy and flow cytometry combined with live/dead staining. UV-C irradiation (254 nm wavelength, irradiation dose: 40 mJ/cm2) at a water flow velocity of 3.4 L/min showed disinfection ability on both bacteria up to 108 CFU/4 L. And flow cytometric analysis showed different physiological shift between S. flexneri and L. monocytogenes after UV-C irradiation, but no significant shift of morphology in both bacteria. In addition, each bacterium revealed different characteristics with time-course observation after UV-C irradiation: L. monocytogenes dramatically changed its physiological feature and seemed to reach maximum damage at 4 h and then recovered, whereas S. flexneri seemed to gradually die over time. This study revealed that UV-C irradiation of water purifiers is effective in disinfecting microbial contaminants in drinking water and provides basic information on bacterial features/responses after UV-C irradiation.

Facile Hydrothermal Synthesis and Characterization of the $CeO_2$ Nanorings

  • Arul, N. Sabari;Kim, Tae Whan;Mangalaraj, Devanesan
    • 한국진공학회:학술대회논문집
    • /
    • 한국진공학회 2013년도 제44회 동계 정기학술대회 초록집
    • /
    • pp.455-455
    • /
    • 2013
  • $CeO_2$ nanorings were synthesized by using a surfactant free hydrothermal method. The surface morphology, structural and optical properties of the synthesized $CeO_2$ was investigated by using scanning electron microscopy (SEM), X-ray diffraction (XRD), and ultraviolet-visible (UV) spectroscopy measurements. SEM images showed that the surface morphology of the formed $CeO_2$ appeared as nanorings. The XRD pattern of $CeO_2$ nanorings showed the presence of the polycrystalline $CeO_2$ phase readily indexed to the cubic fluorite structure of the $CeO_2$. The mean crystallite size of the $CeO_2$ was calculated using the Scherrer equation from the XRD line broadening of the (111) planes of the cubic $CeO_2$. The UV-Visible spectroscopy spectrum of the $CeO_2$ nanorings exhibited a strong UV absorption band around 350 nm.

  • PDF

Asymmetric Metal-Semiconductor-Metal Al0.24Ga0.76N UV Sensors with Surface Passivation Effect Under Local Joule Heating

  • Byeong-Jun Park;Sung-Ho Hahm
    • 센서학회지
    • /
    • 제32권6호
    • /
    • pp.425-431
    • /
    • 2023
  • An asymmetric metal-semiconductor-metal Al0.24Ga0.76N ultraviolet (UV) sensor was fabricated, and the effects of local Joule heating were investigated. After dielectric breakdown, the current density under a reverse bias of 2.0 V was 1.1×10-9 A/cm2, significantly lower than 1.2×10-8 A/cm2 before dielectric breakdown; moreover, the Schottky behavior of the Ti/Al/Ni/Au electrode changed to ohmic behavior under forward bias. The UV-to-visible rejection ratio (UVRR) under a reverse bias of 7.0 V before dielectric breakdown was 87; however, this UVRR significantly increased to 578, in addition to providing highly reliable responsivity. Transmission electron microscopy revealed interdiffusion between adjacent layers, with nitrogen vacancies possibly formed owing to local Joule heating at the AlGaN/Ti/Al/Ni/Au interfaces. X-ray photoelectron microscopy results revealed decreases in the peak intensities of the O 1s binding energies associated with the Ga-O bond and OH-, which act as electron-trapping states on the AlGaN surface. The reduction in dark current owing to the proposed local heating method is expected to increase the sensing performance of UV optoelectronic integrated devices, such as active-pixel UV image sensors.

Photocatalytic Degradation of 3-Nitrophenol with ZnO Nanoparticles under UV Irradiation

  • Li, Jiulong;Ko, Weon Bae
    • Elastomers and Composites
    • /
    • 제52권2호
    • /
    • pp.131-135
    • /
    • 2017
  • Zinc nitrate hexahydrate [$Zn(NO_3){\cdot}6H_2O$] and sodium hydroxide [NaOH] were used as source reagents in the preparation of ZnO nanoparticles in an aqueous solution containing deionized water and ethanol in a ratio of 2:5 (v/v). ZnO nanoparticles were heated in an electric furnace at $700^{\circ}C$ for 2 h under an atmosphere of inert argon gas. The morphological and structural properties of the nanoparticles were characterized by scanning electron microscopy (SEM) and powder X-ray diffractometry (XRD). UV-vis spectrophotometry was used to analyze the photocatalytic degradation of 3-nitrophenol with ZnO nanoparticles as photocatalyst under ultraviolet irradiation at 254 nm. Evaluation of the kinetic of the photo-catalytic degradation of 3-nitrophenol indicated that the degradation of 3-nitrophenol with ZnO nanoparticles obeyed the pseudo-first order reaction rate model.

자외선 열화에 의한 에폭시 절연재료의 표면특성과 내트래킹성 (Surface Characteristics and Tracking Resistance of Epoxy Insulating Materials against Ultraviolet)

  • 조한구;유대훈;강형경
    • 한국전기전자재료학회:학술대회논문집
    • /
    • 한국전기전자재료학회 2008년도 하계학술대회 논문집 Vol.9
    • /
    • pp.495-496
    • /
    • 2008
  • This paper describes the influence of Ultra-violet irradiation on time to tracking resistance of epoxy insulating materials by use of the inclined plane test. And, the influence of surface degradation was evaluated through several method such as measurement of contact angle, surface roughness, using a scanning electron microscopy. As the 1000 hours of the surface degradation with UV-CON, the flashover time decreases at different rates depending on epoxy resin and silicone rubber specimen. As the duration of the surface degradation with UV-CON is prolonged, the contact angle of epoxy resin decreases at the rate of degradation time, while that of silicone rubber was not exchanged. It is assumed that this phenomenon is related to the decrease in hydrophobicity of the surface of the materials. Also, as to epoxy resin, the decrease of hydrophobicity due to surface degradation with UV-CON is greater than that resulting from surface degradation with WOM. The UV radiation produced chalking and crazing on the surface of the insulating materials specimen.

  • PDF

Preparation of Nanosized Palladium-Graphene Composites and Photocatalytic Degradation of Various Organic Dyes

  • Kim, Jae Jin;Ko, Weon Bae
    • Elastomers and Composites
    • /
    • 제51권1호
    • /
    • pp.10-16
    • /
    • 2016
  • Nanosized palladium particles were synthesized using palladium(II) chloride, trisodium citrate dihydrate, and sodium borohydride under stirring condition. Nanosized palladium-graphene composites were prepared from palladium nanoparticles, and graphene was enclosed with polyallylamine under stirring condition for 1 h followed by ultrasonication for 3 h. Nanosized palladium-graphene composites were heated in an electric furnace at $700^{\circ}C$ for 2 h and characterized by X-ray diffraction, scanning electron microscopy, and transmission electron microscopy. UV-vis spectrophotometry was used to evaluate the nanosized palladium-graphene composites as a catalyst in the photocatalytic degradation of various organic dyes such as methylene blue, methyl orange, rhodamine B, and brilliant green under ultraviolet light at 254 nm.

Photocatalytic Degradation of Organic Dyes using CdSe-Mn-C60 Nanocomposites

  • Jiulong Li;Jeong Won Ko;Weon Bae Ko
    • Elastomers and Composites
    • /
    • 제57권4호
    • /
    • pp.181-187
    • /
    • 2022
  • CdSe-Mn nanocomposites were synthesized using a microwave method with sodium sulfite (Na2SO3), selenium (Se), cadmium sulfate octahydrate (3CdSO4·8H2O), ammonia solution (NH3·H2O), and manganese (II) sulfate monohydrate (MnSO4·H2O). We obtained CdSe-Mn-C60 nanocomposites by calcining CdSe-Mn nanocomposites and fullerene (C60) in an electric furnace at 700 ℃ for 2 h. X-ray diffraction, Raman spectroscopy, and scanning electron microscopy were used to characterize the crystal structures, lattice vibrations, and surface morphologies of the products, respectively. The photocatalytic activities of the CdSe-Mn-C60 nanocomposites were investigated based on the photocatalytic degradations of organic dyes such as BG, MB, MO, and RhB under ultraviolet (UV) irradiation at 254 nm. UV-visible spectrophotometry was used to confirm the degradation process.

박테리오파지 f2에 대한 자외광선의 살균효과 (The Inactivation Effects of UV Light on Bacteriophage f2)

  • Kim, Chi-Kyung;Quae Chae
    • 한국미생물·생명공학회지
    • /
    • 제11권3호
    • /
    • pp.155-161
    • /
    • 1983
  • Bacteriophage f2에 대한 자외광선의 살균효과와 외투막 단백질의 구조에 미치는 영향을 Ray-onet photoreactor PPR-208을 사용하여 300nm의 광선으로 연구하였다. 처음 20분간의 조사에서는 약 4 log의 phage가 감소되고 그후 완만한 살균효과를 보이다가 90분 이상의 조사에서는 생존 바이러스가 발견되지 않았다. Tryptophan residue의 fluorescenve quenching, 자외선으로 조신한 phage에 부착시킨 ANS (8-anilino-1-napht-halene sulfonate)의 fluorescence emission의 감소, tryptophan에서 ANS로의 energy transfer 의 감소 등 spectroscopic technique에 의한 결과와 자외선 조사에 의하여 단백질 외투만이 파손되는 전자현미경 관찰의 결과에 의하여 자외광선은 phage f2의 외투막 단백질의 구조에 변화를 일으킨다는 것이 밝혀졌다.

  • PDF