• Journal of Mechanical Science and Technology
• /
• v.16 no.12
• /
• pp.1652-1663
• /
• 2002

It is desirable to perform nondestructive evaluation to assess material properties and part homogeneity because manufacturing of carbon/carbon (C/C) composites requires complicated and costly processes. In this work several ultrasonic techniques were applied to carbon/carbon composites for the evaluation of spatial variations in material properties that are attributable to the manufacturing process. In a large carbon/carbon composite manufactured by chemical vapor infiltration (CVI) method, the spatial variation of ultrasonic velocity was measured and found to be consistent with the densification behavior in CVI process in order to increase the density of C/C composites. Ultrasonic velocity and attenuation depend on a density variation of materials. Low frequency through-transmission scans based on both amplitude and time-of-flight of the ultrasonic pulse were used for mapping out the material property inhomogeneity These results were compared with that obtained by dry-coupling ultrasonics. Pulse-echo C-scans was used to image near-surface material property anomalies such as the placement of spacers between disks during CVI. Also, optical micrograph had been examined on the surface of C/C composites using a destructive way.

• Journal of the Korean Institute of Telematics and Electronics B
• /
• v.32B no.6
• /
• pp.840-848
• /
• 1995

A new tri-aural ultrasonic sensor system is suggested to build more accurate world maps for mobile robots with less scanning. In ordinary single sensor systems, the inherent beam-width of sonar transmitter causes ambiguity in sensing direction. Dual sensors may be used to discriminate plane and corner with several scans. However, the proposed method uses triple sensors, and achieves more accuracy with less scanning.

• Asian-Australasian Journal of Animal Sciences
• /
• v.17 no.1
• /
• pp.7-12
• /
• 2004

Real time ultrasonic measurements for 13th rib fat thickness (LBF), longissimus muscle area (LEMA) and marbling score (LMS) of live animal at pre-harvest and subsequent carcass measurements for fat thickness (BF), longissimus muscle area (EMA), marbling score (MS) as well as body weight of live animal, carcass weight (CW), dressing percentage (DP), and total merit index (TMI) on 755 Korean beef steers were analyzed to estimate genetic parameters. Data were analyzed using multivariate animal models with an EM-REML algorithm. Models included fixed effects for year-season of birth, location of birth, test station, age of dam, linear and quadratic covariates for age or body weight at slaughter and random animal and residual effects. The heritability estimates for LEMA, LBF and LMS on RTU scans were 0.17, 0.41 and 0.55 in the age-adjusted model (Model 1) and 0.20, 0.52 and 0.55 in the weight-adjusted model (Model 2), respectively. The Heritability estimates for subsequent traits on carcass measures were 0.20, 0.38 and 0.54 in Model 1 and 0.23, 0.46 and 0.55 in Model 2, respectively. Genetic correlation estimate between LEMA and EMA was 0.81 and 0.79 in Model 1 and Model 2, respectively. Genetic correlation estimate between LBF and BF were high as 0.97 in Model 1 and 0.98 in Model 2. Real time ultrasonic marbling score were highly genetically correlated to carcass MS of 0.89 in Model 1 and 0.92 in Model 2. These results indicate that RTU scans would be alterative to carcass measurement for genetic evaluation of meat quality in a designed progeny-testing program in Korean beef cattle.

• Journal of Mechanical Science and Technology
• /
• v.14 no.3
• /
• pp.320-330
• /
• 2000

It is desirable to perform nondestructive evaluation (NDE) to assess material properties and part homogeneity because the manufacturing of carbon/carbon brake disks requires complicated and costly processes. In this work several ultrasonic techniques were applied to carbon/carbon brake disks (322mm ad, 135mm id) for the evaluation of spatial variations in material properties that are attributable to the manufacturing process. In a large carbon/carbon disk manufactured by chemical vapor infiltration (CYI) method, the spatial variation of ultrasonic velocity was measured and found to be consistent with the densification behavior in CYI process. Low frequency (e.g., 1-5MHz) through-transmission scans based on both amplitude and time-of-flight of the ultrasonic pulse were used for mapping out the material property inhomogeneity. Images based on both the amplitude and the time-of-flight of the transmitted ultrasonic pulse showed significant variation in the radial direction. The radial variations in ultrasonic velocity and attenuation were attributed to a density variation caused by the more efficient densification of pitch impregnation near the id and od and by the less efficient densification away from the exposed edged of the disk. Ultrasonic velocities in the edges of the disk. Ultrasonic velocities in the thickness direction were also measured as a function of location using dry-coupling transducers ; the results were consistent with the densification behavior. However, velocities in the in-plane directions (circumferential and radial) seemed to be affected more by the relative contents of fabric and chopped fiber, and less by the void content.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.24 no.2
• /
• pp.180-185
• /
• 2004

Conventional ultrasonic examination to detect micro and small surface cracks is based on the pulse-echo technique using a normal immersion focused transducer with high frequency, or an angle-beam transducer generating surface waves. It is difficult to make an automatic ultrasonic system that can detect micro and small surface cracks and position in a large structure like steel and ceramic rolls, because of the huge data of inspection and the ambiguous position data of the transducer. In this study, a high-precision scanning acoustic microscope with a 10MHz large-aperture transducer has been used to assess the existence, position and depth of a surface crack from the real-time A, B, C scans obtained by exploiting the ultrasonic diffraction. The ultrasonic method with large aperture transducer has improved the accuracy of the crack depth assessment and also the scanning speed by ten times, compared with the conventional ultrasonic methods.

• Asian-Australasian Journal of Animal Sciences
• /
• v.19 no.4
• /
• pp.468-474
• /
• 2006

Real time ultrasound data was generated on 10,596 live Hanwoo cows to study genetic variation on ultrasonic beef quality traits and to assess the best model to estimate genetic parameters on these traits. Pedigree stacking and data validation was done using the SAS statistical software and the genetic parameter estimates were obtained by EM-REML algorithm. Out of the five different multi-trait mixed animal models constructed, the optimal model included fixed effects of herd, year-season-appraisal, body condition score, linear and quadratic covariates for chest girth, the linear covariate effect of age and the random animal and residual effect of the five models studied. The heritability of longissimus muscle area (LMA), $12^{th}$ rib measurement of back fat thickness (BF) and marbling score (MS) was 0.11, 0.17 and 0.15, respectively. Genetic correlation of LMA vs. BF, LMA vs. MS and BF vs. MS was -0.15, 0.06 and 0.61, respectively. The results showed presence of genetic variation in these ultrasonic beef quality traits in Hanwoo cows and suggest that the selection of Hanwoo cows may be possible by performing ultrasonic scans on live animals, which will ultimately be helpful in reducing the generation interval and the cost of selection procedure.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.24 no.6
• /
• pp.590-596
• /
• 2004

Neural network-based signal classification systems are increasingly used in the analysis of large volumes of data obtained in NDE applications. Ultrasonic inspection methods on the other hand are commonly used in the nondestructive evaluation of welds to detect flaws. An important characteristic of ultrasonic inspection is the ability to identify the type of discontinuity that gives rise to a peculiar signal. Standard techniques rely on differences in individual A-scans to classify the signals. This paper proposes an ultrasonic signal classification technique based on the information tying in the neighboring signals. The approach is based on a 2-dimensional Fourier transform and the principal component analysis to generate a reduced dimensional feature vector for classification. Results of applying the technique to data obtained from the inspection of actual steel welds are presented.

• Proceedings of the Korean Society For Composite Materials Conference
• /
• 2003.10a
• /
• pp.190-194
• /
• 2003

Two different types of nondestructive evaluation (NDE) techniques were employed to investigate the tensile behavior of ceramic matrix composites (CMCs). Two NDE methods, ultrasonic testing (UT) and infrared (IR) thermography, were used to assess defects and/or damage evolution before and during mechanical testing. Prior to tensile testing, a UTC-scan and a xenon flash method were performed to obtain initial defect information in light of UT C-scans and thermal diffusivity maps, respectively. An IR camera was used for in-situ monitoring of progressive damages. The IR camera measured temperature changes during tensile testing. This paper has presented the feasibility of using NDE techniques to interpret structural performance of CMCs.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.25 no.6
• /
• pp.459-466
• /
• 2005

The scanning laser source (SLS) technique has been proposed recently as an effective way to investigate small surface-breaking defects, By monitoring the amplitude and frequency changes of the ultrasound generated as the SLS scans over a defect, the SLS technique has provided enhanced signal-to-noise performance compared to the traditional pitch-catch or pulse-echo ultrasonic methods, An extension of the SLS approach to map defects in microdevices is proposed by bringing both the generator and the receiver to the near-field scattering region of the defects, To facilitate near-field ultrasound measurement, silicon microcantilever probes are fabricated using microfabrication technique and their acoustical characteristics are investigated, Then, both the laser-generated ultrasonic source and the microcantilever probe are used to monitor near-field scattering by a surface-breaking defect.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.37 no.1
• /
• pp.13-20
• /
• 2017

A conventional phased array ultrasonic system offers the ability to steer an ultrasonic beam by applying independent time delays of individual elements in the array and produce an ultrasonic image. In contrast, full matrix capture (FMC) is a data acquisition process that collects a complete matrix of A-scans from every possible independent transmit-receive combination in a phased array transducer and makes it possible to reconstruct various images that cannot be produced by conventional phased array with the post processing as well as images equivalent to a conventional phased array image. In this paper, a basic algorithm based on the LLL mode total focusing method (TFM) that can image crack type flaws is described. And this technique was applied to reconstruct flaw images from the FMC dataset obtained from the experiments and ultrasonic simulation.