• E2M - 전기 전자와 첨단 소재
• /
• 제9권8호
• /
• pp.825-830
• /
• 1996

In this study, Characteristics of Ultrasonic Transducer fabricated with porous piezoelectric resonator, 3-D underwater object restoration using the self made ultrasonic transducer and modified SCL(Simple Competitive Learning) neural network are investigated. The self-made transducer was satisfied the required condition of ultrasonic transducer in water, and the modified SCL neural network using the acquired object data 16*16 low resolution image was used for object restoration of $32{\times}32$ high resolution image. The experimental results have shown that the ultrasonic transducer fabricated with porous piezoelectric resonator could be applied for SONAR system.

• E2M - 전기 전자와 첨단 소재
• /
• 제10권9호
• /
• pp.916-921
• /
• 1997

In this study Characteristics of 3-D underwater object recognition independent of translation using the self-made ultrasonic sensor fabricated with porous piezoelectric resonator and presented. The sensor was satisfied with requirement of ultrasonic sensor. The recognition rates for the training data and the testing data are 97.45 and 91.25[%] respectively using the self-made ultrasonic sensor and SCL(Simple Competitive Learning) neural network. According to the experimental results It is believed that the self-made ultrasonic sensor can be applied as sensor of SONAR system.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1996년도 추계학술대회 논문집
• /
• pp.316-319
• /
• 1996

In this study, characteristics of ultrasonic transducer fabricated with porous piezoelectric resonator are investigated, 3-D underwater object recognition using the self-made ultrasonic transducer and SOFM(Self-Organizing Feature Map) neural network are presented. The self-made transducer was satisfied the required condition of ultrasonic transducer in water, and the recognition rates for the training data and the testing data were 100 and 95.3% respectively. The experimental results have shown that the ultrasonic transducer fabricated with porous piezoelectric resonator could be applied for sonar system.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1997년도 추계학술대회 논문집
• /
• pp.321-324
• /
• 1997

In this study, Efficiency estimation of ultrasonic sensor fabricated with porous piezoelectric resonator by experiment of 3-D underwater object recognition are presented. The sensor was satisfied with requirement of ultrasonic sensor. The recognition rates for the fixed objects and the translation-rotation objects are 95.3 and 92.7[%], respectively using porous piezoelectric ultrasonic sensor and SOFM neural network. According to the experimental results, It is believed that the self-made ultrasonic sensor can be applied as underwater ultrasonic sensor.

• 대한전자공학회논문지
• /
• 제23권4호
• /
• pp.515-521
• /
• 1986

Performances of a piezoelectric ultrasonic transducer are analyzed considering the internal losses of a piezoleelctric material and fabricated layers. The KLM-model is adopted for the equivalent circuit of a piezoelectric resonator, and the attenuation coefficient is introduced to represent the internal losses of the transducer. The attenuation coefficient of a piezoelectric resonator is inversely proportional to the maximum value of the input electrical resistance, and is confirmed to be an efficient parameter for the analysis of the considerable lossy piezo-electric resonator operating in a thickness mode. Also, the experimentla RTII is obtained by pulse-echo method. The experimental result is deviated from the predicted one within 3 dB over the 20dB frequency bandwidth.

• 한국생산제조학회지
• /
• 제22권4호
• /
• pp.717-722
• /
• 2013

In this study, we investigated the design of a wire wedge bonding ultrasonic tool horn using finite element method (FEM) simulations. The proposed method is based on an initial design estimate obtained by FEM analysis. An ultrasonic excitation causes various vibrations of a transducer horn and capillary. A simulated ultrasonic transducer horn and resonator are then built and characterized experimentally using a laser interferometer and electrical impedance analyzer. The vibration characteristics and resonance frequencies close to the exciting frequency are identified using ANSYS. FEM analysis is developed to predict the resonance frequency of the ultrasonic horn and use it in the optimal design of an ultrasonic horn mode shape.

• The Journal of the Acoustical Society of Korea
• /
• 제25권3E호
• /
• pp.110-114
• /
• 2006

In a previous theoretical paper, we have derived a unified formula by considering 2-D coupled mode vibrations. The unified formula for electromechanical coupling coefficient of piezoelectric resonator was verified experimentally. The capacitance change near the resonant frequency was investigated to estimate the effective coupling coefficient of the resonator instead of the conventional method based on I-D model. The susceptance spectra were measured for the seven samples of piezoelectric resonator with different aspect ratio. Excellent agreement between theoretical and experimental results was obtained.

• The Journal of the Acoustical Society of Korea
• /
• 제21권3E호
• /
• pp.126-131
• /
• 2002

Ultrasonic measurements are made in egg white to study the properties of the solution of the natural protein. The high-Q ultrasonic resonator method is used to get the ultrasonic absorption spectra over the range 0.2-10 ㎒ at 20℃. It is proportional to the 1.25th power of the frequency. The gelation process caused by heat is studied from the change in the velocity and the absorption. at 3 ㎒ using the pulse echo overlap technique over the range of 10-80℃. The absorption decreases with increasing temperature up to 60℃ where it turns up sharply and rapidly increases thereafter. The strong absorption in the gel region is described by the interaction between the solution and the network structure made of protein. Very slow variation in time elapse is observed after the temperature is quickly raised. It would be a real-time observation of the network building process and the characteristic time for the process is shown to be 400 min. A hysteresis phenomenon with respect to the temperature is observed. This phenomenon is associated with the memorizing effect of the network structure of protein of the gel.

• 한국생산제조학회지
• /
• 제24권4호
• /
• pp.407-413
• /
• 2015

Research for renewable energy is being performed since it has the merits of little pollution of the environment and sustainable energy resources. Microalgae is attractive as a renewable energy resource. Biomass of the microalgae can be produced by mass culturing, and bulk harvest technology of is needed to produce biomass continuously. Recently, ultrasonic waves were used to harvest the cultivated microalgae continuously. In this study, the separation process using ultrasonic waves was performed to effectively harvest the microalgae. An ultrasonic wave separation resonator was designed and manufactured based on the acoustic field analysis. Separation experiments using design of experiment were carried out, and the influence of experimental variables from the ultrasonic wave separation process was investigated. Mixing conditions of variables were estimated to obtain high separation efficiency and a large microalgae harvest. Experimental results for suitable mixing conditions were compared with simulation results calculated from the state equation.

• 한국전기전자재료학회논문지
• /
• 제22권5호
• /
• pp.405-410
• /
• 2009

The conventional ultrasonic nozzle produces a mist by applying an ultrasonic vibration into a non-flowering liquid. In this paper, we first present a novel designed nozzle type sprayer that is able to apply an ultrasonic vibration directly to the moving liquid and generate a mist instantly. For the novel nozzle, a ring-type actuator of the novel nozzle was designed and built using the PZW-PMN-PZT ceramics. This paper will describe a variety of physical, mechanical, and electrical characteristics of the ultrasonic nozzle. The characteristics of the mist particles was also measured as the amount of the outflow liquid was varied.