• 연구논문집
• /
• 통권28호
• /
• pp.229-238
• /
• 1998

비파괴평가의 대상이 되는 소재나 부품은 관련 표준시험편을 이용하여 평가되고, 표준시험편은 평가대상과 동일 또는 유사한 재질로 제작되어야 한다고 규정하고 있다. 따라서 비파괴평가가 요구되는 소재나 부품을 생산, 외국에 수출하기 위해서는 반드시 공인된 설비와 품질관리 체계로부터의 인증이 선행되어야 한다. 본 논문에서는 초음파를 이용한 항공기용 Udimet 720Li 디스크의 비파괴평가를 위하여 ASTM에 규정되어 있는 4340강 초음파 표준시험편의 적용타당성을 제시하였다. 현미경 시험을 통하여 Udimet 720Li 합금의 미세조직을 규명하고, 고출력 초음파 분석시스템을 이용한 펄스의 위상값을 측정하는 방법으로 4340강 표준시험편 및 Udimet 720Li 합금의 초음파 속도와 감쇠값을 구하였다. 결론적으로 4340강 초음파 표준시험편이 Udimet 720Li 디스크의 평가를 위한 표준시험편으로 사용될수 있음을 증명하였다.

• 한국표면공학회지
• /
• 제51권5호
• /
• pp.291-296
• /
• 2018

In this study, we carried out an ultrasonic-chemical decontamination process with immersion type, reproduced in the laboratory. The corrosion damage characteristics, depending on kind of materials and ultrasonic process time, were investigated. Inconel 600, which showed lower corrosion potential and higher corrosion current density than that of STS 316, revealed severer corrosion damage and higher weight-loss rate than STS 316. Weight-loss rate of Inconel 600 increased with increasing ultrasonic process time. On the other hands, STS 316 presented a negligibly small corrosion damage, which was almost indistinguishable from visual observation. There was no effect of ultrasonic process time on the weight-loss rate of STS 316.

• 한국음향학회지
• /
• 제40권5호
• /
• pp.408-416
• /
• 2021

초음파 분산에 있어서 초음파의 방사면이 시료에 직접 닿는 것을 피하기 위해 액체시료는 유리용기에 의해 분리되어 음향매질에 의해 초음파 에너지를 받는다. 이와 같이 다층구조로 이루어진 음향시스템에서 초음파에너지의 전달효율은 중요한 요소이다. 본 연구에서는 다층구조로 이루어진 음향시스템에 있어서 프로필렌글리콜 용액을 액체정합층으로 사용하여 초음파에너지 전달효율을 개선하는 방법을 제안하였다. 제안된 방법에서는 란주반형 초음파 트랜스듀서와 루미놀용액과의 사이에 프로필렌글리콜 용액을 액체정합층 매질로 채우고, 초음파트랜스듀서로부터 방사되는 강력초음파의 비선형현상에 의해 발광되는 루미놀용액의 발광정도를 광전증폭관을 이용하여 관측하여 루미놀용액으로의 초음파에너지 전달 효율을 조사하였다. 프로필렌글리콜 농도변화에 따른 초음파에너지 전달정도를 측정하였고, 그 결과 프로필렌글리콜 용액의 농도가 증가함에 따라 정합효과는 증가하는 반면 음향감쇠가 증가함을 알 수 있었다. 이들 두 상충되는 조건이 절충되는 최적의 농도가 존재함을 확인할 수 있었으며, 프로필렌글리콜 용액의 최적 농도를 실험적으로 결정할 수 있었다.

• 비파괴검사학회지
• /
• 제9권1호
• /
• pp.8-21
• /
• 1989

This paper presents the ultrasonic characteristics of weldment and detectability of defects of weldment in Austenitic Stainless Steel Type 304 that is composed of mostly coolant piping system in nuclear power plants. The results of this experient show as follows: 1. When the ultrasonic beam detects the defects on the side of base metal and on the opposite side of weldment, the indications which was detected on the screen show different amplitude and different metal path each. 2. The ultrasonically estimated notch depth is generally oversized than actual notch depth. 3. It is easy for the false indication to show up on the screen because of columnar structure of weldment in austenitic stainless steel. 4. The higher frequencies of transducer have more difficulties to detect the defects of the opposite side of weldment because of ultrasonic attenuation in weldment and the longitudinal transmitter-receiver transducer is the most effective in detecting the opposite side defects of weldment.

• 한국마이크로전자및패키징학회:학술대회논문집
• /
• 한국마이크로전자및패키징학회 2001년도 추계 기술심포지움
• /
• pp.138-140
• /
• 2001

Fluxless flip chip bonding using plasma & ultrasonic wave was investigated in order to evaluate the effect of plasma & ultrasonic treatment on the bondability of the Sn-3.5wt%Ag solder bumped die to TSM-coated glass substrate. The $Ar+10%H_2plasma$ was effective in removing tin oxide on solder surface. The die shear strength of the plasma-treated Si-chip is higher than that of non-treated specimen but lower than that of specimen bonded with flux. The die shear strength with the bonding load at 25W ultrasonic power increased to 0.8N/bump for all bonding temperature but decreased above 1.0N/bump.

• Korea-Australia Rheology Journal
• /
• 제13권2호
• /
• pp.61-65
• /
• 2001

Thermoplastic nanocomposites based on the copolymers of polypropylene (PP)-polystyrene (PS) and organically modified montmorillonite (org-MMT) were produced by using power ultrasonic wave in an intensive mixer. Owing to the unique action of the ultrasonic wave, free radicals of styrene monomers and macroradicals of PP were generated, by which copolymers of PP and PS were formed. Another important aspect of using ultrasonic wave during the mixing process was to enhance nano-scale dispersion of org-MMT by destructing the agglomerates of org-MMT in the polymer matrix. Optimum conditions for the in-situ copolymerization and melt intercalation were studied with various concentrations of styrene monomer, sonication time and different kinds of clay. It was found that a novel attempt carried out in this study yielded further improvement in the mechanical performance of the nanocomposites compared to those produced by the conventional melt mixing process.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2001년도 추계학술대회논문집A
• /
• pp.246-251
• /
• 2001

The performance demonstration round robin test was conducted to quantify the capability of ultrasonic inspection for in-service and to address some aspects of reliability for nondestructive evaluation. The fifteen inspection teams who employed procedures that met or exceeded ASME Sec. XI code requirements detected the pinping of nuclear power plant with various cracks to evaluate the capability of detection. With data from PD-RR test, the performance of ultrasonic nondestructive inspection could be assessed using probability of detection and length and depth sizing of cracks.

• 한국기계가공학회지
• /
• 제11권3호
• /
• pp.80-85
• /
• 2012

The ultrasonic cutting method is which cutting by applying high frequency vibrational energy into specific area at constant pressure. Ultrasonic cutting is consisted of power supply, transducer, booster and cutting tool. Precise designing is required since each part's shape, length and mass can affect driving frequency and vibration mode. This paper focused to cutting tool design, its length L was set by calculating vibration equation. And the value of the shape parameter a was diversified as the integral multiple and the result of 40,189Hz the analysis of Modal was shown in the length 30mm of the result of performance b in the 11th mode Also by performing harmonic response analysis, the frequency response result was 40,189Hz, which was similar to modal analysis result.

• 한국정보통신학회:학술대회논문집
• /
• 한국해양정보통신학회 2008년도 추계종합학술대회 B
• /
• pp.520-523
• /
• 2008

최근까지 전자정보산업의 발달로 자동 초음파검사 하드웨어는 갈수록 경량화 되어 가고 있고, 소프트웨어는 다양한 최신 이미지 처리 기법이 적용되어 정확한 결함 위치 및 크기 측정이 가능하도록 연구되어지고 있다. 본 논문에서는 원전 배관 자동 검사에 최적화된 시스템을 구성하기 위해 배관자동 초음파 검사 시스템을 제안하고, 시스템 설계를 위해 소프트웨어의 데이터 흐름과 일반적인 구성에 대해서 기술한다.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2001년도 춘계학술대회논문집A
• /
• pp.78-83
• /
• 2001

It's required mechanical properties of in-service facilities to maintain safety operation in power plants as well as chemical plants. In this study the four classes of the thermally aged 1Cr-1Mo-0.25V specimens were prepared using an artificially accelerated aging method at $630^{\circ}C$. Ultrasonic tests, tensile tests, $K_{IC}$ tests and hardness tests were performed in order to evaluate the degree of degradation of the material. The mechanical properties were decreased as degraded, but the attenuation coefficient and the harmonic generation level of a ultrasonic signal were increased. Expecially the nonlinear parameter of the signal is sensitive and will be a good parameter to evaluate the material degradation.