• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2003년도 춘계학술대회 논문집
• /
• pp.1046-1050
• /
• 2003

In this paper, we describe study on the development or multi-path ultrasonic gas flowmeter using a transit time method. This system includes 5 pairs of ultrasonic transducers. ultrasonic signal processing unit using switch matrix method, computation algorithm of gas flow rate, spool piece type multi-path pipe unit. We have developed enhanced type of main ultrasonic signal processing unit using switch matrix method fer multi-path ultrasonic gas flowmeter. Also, we have developed the new transmitting ＆ receiving method of ultrasonic waves and the new signal processing algorithm for the computation of ultrasonic transit time from received ultrasonic waves. In this study, we have designed more compact signal processing unit compared with the conventional hardware system of multi-path ultrasonic gas flowmeter. We have confirmed its reliability for multi-path ultrasonic gas flowmeter through the laboratory test using calibration system. In the future. we will perform the field test for the developed system in the POSCO gas line.

• 비파괴검사학회지
• /
• 제25권6호
• /
• pp.439-445
• /
• 2005

The stud bolt is one of crucial parts for safe operation of reactor vessels in nuclear power plants, Crack initiation and propagation were reported in stud bolts that arc used for closure of reactor vessel and head, Stud bolts are inspected by ultrasonic technique during overhaul periodically for the prevention of stud bolt failure which could induce radioactive leakage from nuclear reactor, In conventional ultrasonic testing for inspection of stud bolts, cracks are detected by using shadow effect It takes too much time to inspect stud bolts by using conventional ultrasonic technique. In addition, there were numerous spurious signals reflected from every oblique surfaces of thread, In this study, the signal processing technique for enhancing conventional ultrasonic technique was introduced for inspecting stud bolts. The signal processing technique provides removing spurious signal reflected from every oblique surfaces of thread and enhances detectability of defects. Detectability for small crack was enhanced by using this signal processing in ultrasonic inspection of stud bolts in Nuclear Power Plants.

• International Journal of Aeronautical and Space Sciences
• /
• 제17권4호
• /
• pp.467-475
• /
• 2016

Ultrasonic propagation imaging (UPI) has shown great potential for detection of impairments in complex structures and can be used in wide range of non-destructive evaluation and structural health monitoring applications. The software implementation of such algorithms showed a tendency in time-consumption with increment in scan area because the processor shares its resources with a number of programs running at the same time. This issue was addressed by using field programmable gate arrays (FPGA) that is a dedicated processing solution and used for high speed signal processing algorithms. For this purpose, we need an independent and flexible block of logic which can be used with continuously evolvable hardware based on FPGA. In this paper, we developed an FPGA-based ultrasonic propagation imaging system, where FPGA functions for both data acquisition system and real-time ultrasonic signal processing. The developed UPI system using FPGA board provides better cost-effectiveness and resolution than digitizers, and much faster signal processing time than CPU which was tested using basic ultrasonic propagation algorithms such as ultrasonic wave propagation imaging and multi-directional adjacent wave subtraction. Finally, a comparison of results for processing time between a CPU-based UPI system and the novel FPGA-based system were presented to justify the objective of this research.

• 한국조명전기설비학회:학술대회논문집
• /
• 한국조명전기설비학회 2004년도 학술대회 논문집
• /
• pp.359-364
• /
• 2004

This paper deals with the comparison of signal processing techniques of ultrasonic data. The goal of signal processing is the ultrasonic speckle suppression and the visibility enhancement of flaw-reflected ultrasonic echo. The performance of conventional SSP(split spectrum processing) method and the wavelet denoising method are compared and discussed for tested ultrasonic data. Tested ultrasonic data obtained from the weld area of centrifugal-casted stainless steel material and safe-ending material with holes and notch of variable depths are presented. In experimental results, the outputs of wavelet-based denoising method show the clear and sharp peaks at the positions of flaw-reflected echos comparing with those of SSP method.

• 비파괴검사학회지
• /
• 제20권6호
• /
• pp.501-510
• /
• 2000

초음파 에코파형의 시간-주파수해석법으로 Wigner 분포와 웨이브렛 변환 등과 같은 새로운 신호처리 기법이 비파괴평가 분야에 널리 응용되고 있다. 본 연구에서는 웨이브렛 변환(wavelet transform)에 의한 음속과 감쇠계수의 주파수의존성과 초음파 결함신호의 잡음제거의 유용성 유무를 실험적으로 검증하였다. Gabor 함수를 웨이브렛의 기본함수로 사용하였다. 초음파의 에코파형에 포함된 각 주파수성분의 속도와 감쇠계수의 주파수의존성을 추정할 수 있었으며, 초음파탐상에서 결함의 검출능 향상과 결함크기 산정의 정량화에 접근하기 위해 웨이브렛 변환에 의한 S/N비 신호처리 시뮬레이션 결과를 오스테나이트강 스테인레스 용접부에 가공한 EDM 노치의 초음파 결함신호에 적용한 결과 임상에코를 저감하고 S/N비를 개선하는 것이 가능하였다.

• Journal of Electrical Engineering and Technology
• /
• 제9권5호
• /
• pp.1753-1761
• /
• 2014

Due to the inherent inhomogeneous and anisotropy nature of the composite materials, the detection of internal defects in these materials with non-destructive techniques is an important requirement both for quality checks during the production phase and in service inspection during maintenance operations. The estimation of the time-of-arrival (TOA) and/or time-of-flight (TOF) of the ultrasonic echoes is essential in ultrasonic non-destructive testing (NDT). In this paper, we used split-spectrum processing (SSP) combined with matching pursuit signal decomposition (MPSD) to develop a dedicated ultrasonic detection system. SSP algorithm is used for Signal-to-Noise Ratio (SNR) enhancement, and the MPSD algorithm is used to decompose backscattered signals into a linear expansion of chirplet echoes and estimate the chirplet parameters. Therefore, the combination of SSP and MPSD (SSP-MPSD) presents a powerful technique for ultrasonic NDT. The SSP algorithm is achieved by using Gaussian band pass filters. Then, MPSD algorithm uses the Maximum Likelihood Estimation. The good performance of the proposed method is experimentally verified using ultrasonic traces acquired from three specimens of carbon fibre reinforced polymer multi-layered composite materials (CFRP).

• 한국음향학회지
• /
• 제16권2호
• /
• pp.5-9
• /
• 1997

본 논문에서는 chirp 신호를 초음파 신호처리 시스템에 입력시킬 때 반사신호의 진폭을 최대로 얻기위한 chirp 신호의 대역폭을 결정하는 방법을 연구하였다. 초음파 신호처리 시스템에서 반사신호의 S/N 비는 초음파의 전파시에 발생하는 감쇠와 산란에 의하여 매우 낮게된다. Chirp 신호를 사용한 펄스 압축기술은 초음파 반사시스템의 S/N 비를 증가시킬 수 있는 방법중 하나이다. 시뮬레이션 및 실험결과, chirp 신호의 펄스폭이 넓을수록 출력이 증가하였고 동일한 펄스폭과 주어진 초음파시스템의 대역폭에 대한 최대출력은 chirp 신호의 대역폭이 초음파시스템의 대역폭 보다 1.15배 클 때 얻어짐을 확인하였다.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2001년도 춘계학술대회논문집A
• /
• pp.541-546
• /
• 2001

Application of bonding by adhesives can be found in many industries, particularly in advanced technological domains such as the aeronautical and space industries, automobile manufacture, and electronics. Periodic inspection with conventional ultrasonic NDE techniques is capable of indicating the presence and possible location of crack. Continuous ultrasonic attenuation monitoring has potential to supply information. This study used adhesive-bonded single-lap joints specimen to evaluate such possibility by ultrasonic signal processing method.

• 한국정보통신학회논문지
• /
• 제14권1호
• /
• pp.225-232
• /
• 2010

용접부 내에 존재하는 결함의 형태, 위치, 크기 등의 정보를 정량적으로 파악하기 위하여 초음파 탐상 검사가 많이 활용되는데, 최근 들어 용접부의 결함 탐상을 위해, 검사과정을 기계적 스캐너로 자동화한 자동 초음파 탐상 시스템이 많은 산업 분야에서 활용되고 있고, 특히 배관 용접부의 건전성 평가를 위한 비파괴안전진단에서 그 활용 폭이 커지고 있다. 본 논문에서는 배관 용접부의 자동 초음파 검사를 위한 알고리즘 구현과 결함 영상을 보정하여 주는 결함영상 처리 시스템을 설계 및 구현하였다. 적용된 기법으로는 초음파 A-Scan 압축 알고리즘, Synthetic Aperture Focusing 알고리즘, 결함영상증폭 알고리즘과 이와 관련된 소프트웨어 설계 및 구현에 대하여 논한다.

• 비파괴검사학회지
• /
• 제32권5호
• /
• pp.540-544
• /
• 2012

위상배열 기술에 기반을 둔 통상의 초음파검사에서처럼, 자왜형 원거리 초음파검사에서도 실시간 수신신호 처리를 위해 복잡한 전자회로들을 사용하여왔다. 본 연구는 위상 보상, 노이즈 필터링, 파형 변환 등과 같은 필수적인 작업들을 기존의 하드웨어 접근보다는 소프트웨어 접근을 이용하여 수행할 때, 보다 유연하고 효율적인 실시간 신호처리가 가능해진다는 것을 보여준다. 이는 비용효율적인 원거리 초음파검사 시스템 구축과 검사 결과 분석에 기여할 것이다.