• Horticultural Science & Technology
• /
• v.28 no.3
• /
• pp.462-468
• /
• 2010

Top parts of $Dendranthema$ $zawaskii$ var. $yezoense$ (DZY) and $Cosmos$ $bipinnatus$ (CB) are believed to contain substances with antioxidant effects and activity. Present experiments were undertaken to investigate an adequate and efficient extraction method which ensures the highest yield of antioxidant components. Extraction yield was 1.11-1.92 times higher by ultrasonic method than other methods in both species. By 45 minute ultrasonic extraction, total polyphenol contents reached the highest level, $80.70mg{\cdot}g^{-1}$ tannic acid equiv./DW in $Cosmos$ $bipinnatus$ and total flavonoid contents $50.41mg{\cdot}g^{-1}$ naringin equiv./DW in DZY. DPPH radical scavenging activity was almost the same among extraction methods or slightly higher in reflux extraction. The highest DPPH radical scavenging was observed by reflux extract in CB ($RC_{50}=0.135mg{\cdot}mL^{-1}$). ABTS radical scavenging activity was the highest by 15 minute ultrasonic wave in DZY and CB, $RC_{50}=0.159mg{\cdot}mL^{-1}$ and $RC_{50}=0.139mg{\cdot}mL^{-1}$, respectively. High ferrous ion chelating effects were obtained by 30-minute ultrasonic wave in DZY ($RC_{50}=0.803mg{\cdot}mL^{-1}$). Extracts of top parts of DZY obtained by reflux method showed the highest inhibition effect against peroxidation of linoleic acid, and extract of CB obtained by ultrasonic for 45 minutes showed the highest inhibition effect. In conclusion, optimum extraction method should be adjusted according to plant species and antioxidant substances.

• Polymer(Korea)
• /
• v.32 no.1
• /
• pp.13-18
• /
• 2008

For the evaluation of brominated flame retardants included in polymeric electronic devices, we investigated the extraction methods and solvent systems for four different types of polymers of PC (polycarbonate), PP (polyropylene), PET (poly(ethylene terephthalate)) and PBT (poly(butylene terephthalate)) using different solvent systems of hexane/acetone, THF, toluene, and THF/toluene. In order to compare the extraction efficiency of different methods and solvent systems, the deca-BDE (decabromo diphenyl ether) flame retardant was included in PC, PP, PET and PBT systems and subsequently extracted by soxhlet, ultrasonic, accelerated solvent, microwave and supercritical fluid extraction methods. The amount of the extracted flame retardant was monitored to evaluate the extraction efficiency. The ultrasonic extraction method was found not to be acceptable as an extraction method for the polymer systems mainly due to a low salvation efficiency of the organic solvents. Soxhlet, accelerated solvent and microwave extraction methods exhibited over 80% of extraction efficiency for toluene. The supercritical fluid extraction method, which has been used as an extraction method for flame retardants in polymers, showed the extraction efficiencies of ca. 100% for PC and PP in the optimal extraction conditions of $60^{\circ}C$ and 120 bar.

• Journal of Periodontal and Implant Science
• /
• v.28 no.4
• /
• pp.809-822
• /
• 1998

Adequate root preparation in the treatment of periodontal disease often involves mechanical instrumentation to remove plaque, calculus perhaps contaminated cementum. Although meticulous scaling and root planing may remove some cementum, the use of aggressive root planing to remove cementum does not appear warranted. So ultrasonic device and rotary instrument appear to be replacing hand instrument. But it is not clear those instruments make smooth root surface as hand instrument. The roghness of the root surface were evaluate with SEM following instrumentation with Gracey curette, Perio Clean and piezo ultrasonic device(Setlec) with various tip. 20 extracted teeth were used in vitro experiment, and 9 teeth of a patient destined for extraction for periodontal reasons were utilized in vivo experiment. It was demonstrated that hand curette created the smoothest surface, while diamond tip tended to roughen the root surface. But the hand curette, Perio Clean, and piezo ultasonic device with scaler tip tend to remove cementum completely. Piezo ultrasonic device with curette-like tip made the desirable smooth surface with partial removal of cementum.

• Journal of Welding and Joining
• /
• v.16 no.6
• /
• pp.86-96
• /
• 1998

This study proposes the analysis method of time series ultrasonic signal using the chaotic feature extraction for degradation extent evaluation. Features extracted from time series data using the chaotic time series signal analyze quantitatively degradation extent. For this purpose, analysis objective in this study is fractal dimension, lyapunov exponent, strange attractor on hyperspace. The lyapunov exponent is a measure of the rate at which nearby trajectories in phase space diverge. Chaotic trajectories have at least one positive lyapunov exponent. The fractal dimension appears as a metric space such as the phase space trajectory of a dynamical system. In experiment, fractal correlation) dimensions, lyapunov exponents, energy variation showed values of 2.217∼2.411, 0.097∼ 0.146, 1.601∼1.476 voltage according to degardation extent. The proposed chaotic feature extraction in this study can enhances precision ate of degradation extent evaluation from degradation extent results of the degraded materials (SA508 CL.3)

• Journal of the Korean Society for Railway
• /
• v.2 no.1
• /
• pp.38-46
• /
• 1999

This study proposes the analysis and evaluation method of time series ultrasonic signal using the attractor analysis. Features extracted from time series signal analyze quantitatively characteristics of weld defects. For this purpose, analysis objective in this study is fractal dimension and attractor quadrant feature. Trajectory changes in the attractor indicated a substantial difference in fractal characteristics resulting from distance shifts such as parts of head and flange even though the types of defects are identified. These differences in characteristics of weld defects enables the evaluation of unique characteristics of defects in the weld zone. In quantitative fractal feature extraction, feature values of 3.848 in the case of part of head(crack) and 4.102 in the case of part of web(side hole) and 3.711 in the case of part of flange(crack) were proposed on the basis of fractal dimensions. Proposed attractor feature extraction in this study can enhance the precision rate of ultrasonic evaluation for defect signals of rail weld zone such as side hole and crack.

• Journal of Navigation and Port Research
• /
• v.29 no.4
• /
• pp.341-347
• /
• 2005

A unique technique to extract the phase in time domain is proposed in order to measure the time parameters such as speed and depth by transmitting sound and electric waves. In the signal analysis processing, the phase of pulse signal can be transformed and digitalized with local data in real time without the effect of direct current bias and Nyquist limits. This method is sensitive to base frequency of pulse signal with high spacial resolution and is effective to compare two signals which have different forms. It is expected that the phase analysis technique will be applied to the measurement of the speed and depth accurately by ultrasonic pulse signal in water.

• Proceedings of the KSR Conference
• /
• 1998.11a
• /
• pp.87-95
• /
• 1998

This study proposes the analysis and evaluation method of time series ultrasonic signal using the attractor analysis. Features extracted from time series signal analyze quantitatively characteristics of welding defects. For this purpose, analysis objective in this study is fractal dimension and attractor Quadrant feature. Trajectory changes in the attractor indicated that even the same type of defects carried substantial difference in fractal characteristics resulting from distance shifts such as parts of head and flange. Such differences in characteristics of weld defects enables the evaluation of unique features of defects in the weld zone. In quantitative fractal feature extraction, feature values of 3.848 in the case of part of head(crack) and 4.102 in the case of part of web(side hale) and 3.711 in the case of part of flange(crack) were proposed on the basis of fractal dimensions. Proposed attractor feature extraction in this study can enhance the precision rate of ultrasonic evalaution for defect signals of rail weld zone such as side hole and crack.

• The Korean Journal of Food And Nutrition
• /
• v.32 no.1
• /
• pp.41-49
• /
• 2019

Carotene, xanthophyll, carotenoid anthocyan, phycopyrine, chlorophyll, and monascus pigments are used as natural coloring agents since they are more stable to human body than synthetic coloring agents. Among them, monascus pigments are a natural red pigment produced by the Monascus purpureus. For the development of edible paint using natural pigment, Monascus purpureus strain was cultured at a temperature of $35^{\circ}C$ for 15 days on a PDYA plate and liquid medium to produce a red pigment. In addition, a large amount of the red pigment was extracted from Hongkuk Koji in parallel with water extraction and ultrasonic wave extraction. At this time, the yield of ultrasonic extract was 2~4 times higher. Thus, Monascus purpureus strains, etc. were prepared by freeze-drying powder. In conclusion, natural paints made with red pigments have enabled the development of been edible paints that can be used as eco-friendly materials with good viscosity, enhanced spread ability and coloration.

• Korean Journal of Plant Resources
• /
• v.24 no.2
• /
• pp.174-180
• /
• 2011

This study was conducted to investigate the optimum condition of extraction from fronds of Osmunda japonica to increase antioxidant compounds and antioxidant activity. Powder (1 g) of lyophilized fronds were mixed with three different solvents (MeOH, 80% EtOH and water). Extraction was carried out using not only by immersion (room temp.), heating ($60^{\circ}C$) and stirring (200 rpm) for 6 h, but also by sonication in 42 kHz ultrasonic bath for 15, 30 and 45 min. Extracts were filtered, and adjusted up to 50 mL to determine contents of soluble solids, total polyphenols and total flavonoids. Antioxidant capacity was measured by radical scavenging activity of 0.15 mM DPPH (2,2-diphenyl-1-picrylhydrazyl) and 7.4 mM ABTS [2,2'-azino-bis(3-ethylbenzothiazoline-6-sulfonic acid)] radical. Among the solvents, MeOH and 80% EtOH appeared to be effective for extraction. Extract obtained from sonication in MeOH for 15 min resulted high polyphenol contents (45.15 $mg{\cdot}g^{-1}$ db) and DPPH radical scavenging activity ($RC_{50}$= 0.35 $mg{\cdot}mL^{-1}$). The highest flavonoid contents was obtained from immersion or heating extraction with MeOH (38.10~38.10 $mg{\cdot}g^{-1}$ db). ABTS radical scavenging was high in same extraction with 80% EtOH ($RC_{50}$= 0.21~0.22 $mg{\cdot}mL^{-1}$). Altogether, our results indicate that the extraction using ultrasonic bath with MeOH as a solvent (for 15~30 minutes) was the most effective way not only for increasing various antioxidant activities but also for saving labor and time in case of fronds of Osmunda japonica.

• KEPCO Journal on Electric Power and Energy
• /
• v.7 no.1
• /
• pp.153-159
• /
• 2021

A two-step process for increasing the leaching efficiency of yttrium and neodymium from coal fly ash were investigated at solid loadings of 5.0 g ash ~1,000 g ash/l of 1.0 N~10.0 N H₂SO₄, temperature ranging from 30℃ to 90℃, ultrasonic leaching time of 1~10 hours, and ultrasonic power of 25~200 W. The yttrium and neodymium from coal fly ash were effectively leached into ion phases by step change of the first conventional dissolution at room temperature and then the second heating process with the aid of ultrasonic wave, and maximum leaching efficiency of yttrium and neodymium obtained were 66 % and 63 %, respectively. The activation energies for the leaching reaction of yttrium and neodymium at second heating process dependent on leaching time and temperature were derived to be 41.540 kJmol^-1 and 507.92 kJmol^-1, respectively. The optimum conditions for the maximum leaching of yttrium and neodymium were found to be the solid loading of 250 g ash/l of H₂SO₄, solvent concentration of 2.0 N H₂SO₄, and second step process of temperatures of 30℃ for 3 hours and then 90℃ for 4 hours with ultrasonic intensity of 100 W.