• Journal of Korean Society for Geospatial Information Science
• /
• v.21 no.2
• /
• pp.45-51
• /
• 2013

Today, people who live in sea of information are strongly appearing desire about quicker and more accurate information. For a long time people wanted to know information about place that I am and where I must go out, and there are various methods to have a keen desire for position information. Equipment that is using most among the method is digital camera. In this study, the accuracy of external orientation, GCP and check point depending on array of GCP and regional feature are analyzed after AT(aerial triangulation) with UltraCamX in three selected study area with specific feature. As analysis result, we could get to know that area with a mountainous district rapidly decreased accuracy of external orientation according as number of GCP decreases, and area with high buildings became low in vertical accuracy of checkpoint. This study has performed the analysis of regional factors in aerial triangulation accuracy.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.27 no.2
• /
• pp.177-186
• /
• 2009

Nowadays, as going to information society based knowledge, the informations are acquired, processed, serviced based digital environment. In surveying field, the trend have been changed from the analog foundation to the digital foundation. Also, aerial photogrammetry is being changed from analog aerial photogrammetry to digital aerial photogrammetry. In this paper, the analysis of accuracy is performed for the comparison of traditional aerial photogrammetry with digital aerial photogrammetry usign UltracamX in AT and Block Adjustment. As the results, Bundle adjustment in digital aerial photogrammetry with GPS/INS have more advantages than traditional independent adjustment in analog aerial photogrammetry. Digital aerial photogrammetry contributes the higher accuracy in AT and block adjustment more than analog aerial photogrammetry.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.12 no.6
• /
• pp.10-16
• /
• 2013

Ultra-fine planing and micro punching are separately used for improving surface roughness and machining dot patterns, respectively, of metal molds. If these separate machining processes are applied for machining of identical molds, there could be an aligning mismatch between the machine tool and the mold. A hybrid machining system combining ultra-fine planing and micro punching was newly developed in this study in order to solve this mismatch; hybrid process technology was also developed for machining dot patterns on a mirror surface of a metal mold. The hybrid machining system has X, Y, and Z axes, and a cam axis for ultra-fine planing. The cam axis and attachable and removable solenoid actuators for micro punching can make large and small sizes of dot patterns, respectively. Ultra-fine planing was applied in the first place to improve the surface roughness of a metal mold; the measured surface roughness was about 20nm. Then, micro punching was applied to machine dot patterns on the same mold. It was possible to control the diameter of the dot patterns by changing the input voltage of the solenoid actuator. Before machining, severe inhomogeneous plastic deformation around the machined dot patterns was also removed by annealing heat treatment. Therefore, it was verified that metal molds with dots patterns for optical products can be machined using a hybrid machining system and the hybrid process technology developed in this study.