• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2005년도 춘계학술대회 논문집
• /
• pp.1626-1629
• /
• 2005

Recently many countries have concentrated their effort on the port automation, in order to be the Hub-port, that the Ultra Large Container Ship could come alongside the Quay, in their region. As the magnitude of the container ship increase, that of the Quay crane increases from 50ton-class to 61ton-class more and more. The wind speed criteria to design the structures used in the port was upgraded from 20m/s to 40m/s due to change of the weather condition. Our laboratory could have the ability to design the wedge type rail clamp for 50ton-class Quay crane in 30m/s wind speed. Accordingly we analyzed the load condition of the Quay crane about 40m/s wind speed upgraded from 20m/s and designed the wedge type rail clamp for 50ton and 61ton-class Quay crane.

• 대한조선학회논문집
• /
• 제48권5호
• /
• pp.465-472
• /
• 2011

Recently, ultra large scale of ship is being ordered continuously and because of that, the accurate prediction of ship maneuverability in design stage becomes important matter. The model test like PMM test or CFD analysis are representative methods for predicting the maneuverability of ship. In this study, the captive model tests were carried out for predicting maneuverability of MOERI container ship(KCS) which is opened to the public using X-Y Carriage of Ocean Engineering Wide Tank of University of Ulsan. Considering the dimensions of tank, 2m class model ship was used for captive model test. CMT(Circular Motion Test) was performed for obtaining purer hydrodynamic coefficients related to yawing velocity. For getting hydrodynamic coefficients which cannot be obtained using CMT, PMM test(Planar Motion Mechanism test) were also performed. The maneuverability prediction results by simulation are compared with those of other research institutes.

• 대한조선학회 특별논문집
• /
• 대한조선학회 2017년도 특별논문집
• /
• pp.80-87
• /
• 2017

This paper is related to structural assessment considering the hydroelastic response of ultra large container ships, especially from whipping (bow or stern impacts) and from springing (resonance). In general, whipping contributes both to increased fatigue and extreme loading, while springing does mainly contribute to increased fatigue loading. To evaluate the hydroelastic response quantitatively with high accuracy, numerical code considering hydro-structure coupling was applied and fatigue strength of a 13,100 TEU class containership was verified. The segmented model test and full scale measurement were also needed to assess the effect of whipping and springing on the fatigue and extreme capacity in more realistic way and for verification of the numerical tools. With reference to class rule, fatigue assessment considering springing effect and extreme assessment considering whipping effect were introduced.

• 무역상무연구
• /
• 제26권
• /
• pp.143-172
• /
• 2005

The biggest exchange of international environment of shipping logistics in 21 century should appear ultra-mega container ships on the shipping market. The competitive trend of large size container ship was based on economics of scale among the international shipping business. In the environment, shipping firms consider the integration of freight forwarder and shipper in the international logistics process. The aims of this research analyse a relation between the environment uncertainty and logistics information system(LIS) and the integration and resolve the integration and its impact on logistics performance. The research methodology of this research analyse structural equation modeling on the relation of variables. The results of research are as follows. First, Environmental uncertainty significantly influences the internal integration and the external integration. Second, LIS has an influence on the logistics integration by providing the foundation for LIS utilization in international logistics process. Third, the internal integration significantly influences a logistics performance, which implies that firms should promote interaction and collaboration through internal process integration to achieve logistics performance as the logistical cost and service. But the external integration is not significantly a logistics performance.

• Journal of Welding and Joining
• /
• 제33권3호
• /
• pp.62-67
• /
• 2015

A very large shell-structure built in shipyards like ship hulls or offshore structures are joined by welding through full process. As the welding contains a high thermal cycle at a local area, the welded structures should be distorted unavoidably. Because a distorted ship block should be revised to the designed value before the next stage, the ability to predict and to control the weld distortion is an accuracy level of the yard itself. Despite the ship block size, several present thermal distortion methodologies can deal those sizes, but it is a different story to deal full ship size model. Even a fully constructed ship hull not remaining any welding can have an accuracy issue like outfitting installation problems. Any present thermal distortion methodology cannot accept this size for its recommended element size and the number. The ordinary welding breadth at erection stage is about 20~40 mm. It can hardly be a good choice to make finite element model of these sizes considering human effort and computational environment. The finite element model for structure analysis of a ship hull is prepared at front-end engineering design stage which is the first process of the project. The element size of the model is as fine as the longitudinal space, and it is not proper to obtain a weld distortion at the erection stage. In this study, a methodology is suggested that a weldment can be shrunk at original place instead of using structural finite element model. We cut the original shell elements at erection weld-line and put truss elements between the edges of cut elements for weld shrinkage. Additional truss elements are used to facsimile transverse weld shrinkage which cannot be from the weld-line truss element shrink. They attach to weld-line truss element like twigs from barks. The capacity of developed elements is verified through an accuracy check of erection process of a container vessel at the apt. hull. It can be a useful tool for verifying a centering accuracy after renew and for block-separating planning considering accuracy.

• 한국항해항만학회지
• /
• 제28권3호
• /
• pp.207-211
• /
• 2004

LMTT(Linear Motor-based Transfer Technology)는 항만 자동화를 위한 컨테이너 터미널용 수평 이송 장치이며, rail과 shuttle car(mover)에 부착된 stator module로 구성된 PMLSM(Permanent Magnetic Linear Synchronous Motor)에 의해 구동된다. 본 논문은 inner beam과 outer beam의 높이비가 LMTT용 shuttle car의 frame 강도 및 강성에 미치는 영향을 살펴보았다. 설계변수는 inner beam의 단면형상 및 높이비로 설정하였으며, 유한요소해석을 통하여 설계변수가 frame의 강도 및 강성에 미치는 영향을 살펴보았다.

• 한국항해항만학회지
• /
• 제46권4호
• /
• pp.321-330
• /
• 2022

부산항은 우리나라 항만 중 가장 많은 물동량을 처리하고 있으며, 부산신항은 부산항 전체의 물동량 중 68.5%를 차지하고 있다. 이러한 물동량 증가로 인하여 부산신항에는 극초대형 컨테이너 선박이 입항하고, 최근에는 남컨테이너 부두 선석 추가 개장 및 현재 진행중인 서컨테이너 부두 건설 사업이 완료되면 부산신항 진출입 항로 내 다양한 조우 상황이 발생하게 되어 충돌 위험 상황을 초래할 수 있다. 이에 본 연구는 부산신항 진출입 항로 내 선박 통항 안전성을 향상하는 방안을 마련하고자 하였다. 이를 위하여 부산신항 내 항만 입출항 현황, 해상교통흐름을 살펴보았으며, AHP 기법을 활용하여 연구 수역 이용자들로부터 위험요소 및 안전대책을 식별하였다. 또한, 도출된 안전대책을 기반으로 환경 스트레스 모델(Environmental Stress model, ES model)을 활용하여 시나리오를 설정하고, 해상교통류 시뮬레이션 실시하여 각 안전대책의 교통 위험도를 파악하였다. 설문조사 및 시나리오 평가 결과, 선박운항자는 일방통행을 위한 진입금지 해역 설정을 가장 중요하게 생각하였으며, 이는 위험도 경감에 큰 효과가 있을 것으로 예상되었다, 본 연구는 부산신항을 입출항 하는 선박들의 통항 안전성 제고를 위한 안전대책 마련의 기반이 될 수 있으며, 추후 안전대책이 마련되면 부두 신설에 따라 변화된 교통량과 교통흐름을 활용하여 안전성에 대한 검증을 실시할 필요가 있다.

• 한국기계가공학회지
• /
• 제20권1호
• /
• pp.80-87
• /
• 2021

Most container ships are currently being constructed as Ultra-Large Container Ships. Hence, the equipment of the ships is also becoming relatively large. In particular, propellers, rudders, and rudder stocks are large in the stern structure, and in relation, efficient design of the hull structures to safely secure these parts is important. The bottom shell plate surface of a stern skeg is a perforated plate from which the rudder stock penetrates, so it is an important component for the stern structure. In this paper, to determine the critical buckling of the shell plate, an interaction curve equation for the two-axis compression of the shell plate was derived using the maximum value of the static structural stress multiplier in a load multiplier mode. This equation predicts the timing of the buckling occurrence. By analyzing this interaction curve equation, the buckling behavior of the plates subjected to a combination load was determined and the usefulness of applying it to ship building was investigated.

• 한국항해항만학회지
• /
• 제33권10호
• /
• pp.723-734
• /
• 2009

최근 컨테이너 선박은 조선 기술의 발달과 세계 경제교역 규모의 급속한 증가에 따라 대형화, 고속화가 빠르게 진행되고 있다. 이에 머지않아 15,000TEU급 컨테이너 선박의 등장이 예상되고 있다. 동북아시아에서는 경제의 글로벌화에 따른 급격한 물류환경 변화에 대응하여 물류 주도권 확보를 위한 물류거점화 경쟁이 치열하게 전개되고 있다. 이에 따라 주요항만에서는 대형 선사를 유치하기 위한 치열한 경쟁을 하고 있다. 이를 위해 본선작업을 신속하고 정확하게 처리하기 위한 노력이 절실히 필요하며 지금까지의 본선계획 시스템은 획기적으로 개선되어야 할 것이다. 그리하여 본 논문에서는 이러한 기존 본선작업의 개선을 위하여 다수의 플래너를 이용한 양?적하 작업계획을 수행하여 보다 신속하고 정확하게 하며, 플래너(Planner)간의 정보공유로 작업계획의 품질을 보다 향상시킬 수 있는 다중분산 본선작업 계획 시스템을 제안한다. 그리고 이의 효율성을 검증하기 위해 아레나(ARENA)를 통한 시뮬레이션을 수행하고자 한다.

• 한국항해항만학회지
• /
• 제33권3호
• /
• pp.199-206
• /
• 2009

2007년 초 1만1천TEU 엠마머스크호의 첫 등장을 필두로 향후 5년 이내 1만5천TEU급의 극초대형선 등장이 예견됨에 따라 항만관련 기술들의 고생산성화, 첨단화, 자동화, 효율화는 필수적으로 동반되는 미래의 요구사항으로 대두되고 있다. 이러한 급격한 항만환경변화에 대응하기 위해 세계 선진항만운영사와 기업들은 항만산업시장 선점과 기술개발경쟁을 치열하게 벌이고 있다. 국내에서는 기존에 체계적, 분석적, 세부적인 항만기술개발 로드맵이 없어 국가적 항만기술개발 정책의 효율적 추진과 국내 항만관련 산업의 활성화를 이루지 못하고 있다. 따라서 본 연구에서는 세계 항만환경변화 추세를 바탕으로 분야별 국내 항만기술의 개발과제 도출과 개발우선순위를 분석하였고, 분야별/기술별 개발시점에 따른 거시적 로드맵 및 분야별 개발기술에 대한 제품개발과의 연관 로드맵을 수립하였다.