• Composites Research
• /
• 제35권3호
• /
• pp.201-215
• /
• 2022

본 연구에서는 초고온 환경에서 내화학성 및 열적 안정성이 우수한 지오폴리머 기반의 알루미노실리케이트 레진과 세라믹 섬유를 활용한, 목표주파수 X-band(8.2 GHz to 12.4 GHz)에서 전자파를 흡수하는 세라믹 복합재(Radar-absorbing ceramic composite, RACC)를 구현하였다. 주 성분이 FeSi인 판형 구조의 샌더스트 자성 입자를 분산시킨 알루미노실리케이트 레진은 목표 주파수 대역에서 자성 및 유전손실 특성을 발휘하였고, 입도와 무게분율별 유전특성을 Cole-Cole Plot으로 표현하였다. 샌더스트가 분산된 알루미노실리케이트 레진의 미세구조, 화학적 성분 및 결정, 자기 및 열적 특성 등을 분석하기 위해 SEM, EDS, VSM 및 TGA를 측정하였다. 샌더스트의 입도 크기 35 ㎛, 무게분율 40 wt.%를 분산시킨 레진의 유전손실 특성을 활용하여, X-band에서 약 1.51 GHz 대역폭에 대해 -10 dB 이하의 반사손실 성능을 발휘하는 단층형(t = 1.585 mm) RACC를 설계 및 제작하였다. 제작된 RACC의 초고온(25℃ to 1,000℃)에서 전자파 흡수 거동을 살피기 위해 개발된 초고온 환경 자유공간측정 장비를 활용하여 X-band 대역에서 그 성능을 검증하였다.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2017년도 춘계 학술논문 발표대회
• /
• pp.224-225
• /
• 2017

Ultra-high-strength concrete exposed to high temperature is likely to cause spalling. Spalling is caused by the vapor pressure of the concrete, and the vapor pressure may be different depending on the heating conditions of the concrete. Therefore, in this study, a ring-type restrained specimen was fabricated using ultra-high-strength concrete and the vapor pressure generated in the concrete by heating condition(rapid and slow heating) was evaluated.

• 동력기계공학회지
• /
• 제2권1호
• /
• pp.25-30
• /
• 1998

In order to investigate the droplet size distribution and Sauter Mean Diameter in a ultra high pressure diesel spray, fuel was injected with ultra high pressure into the environments of high pressure and room temperature by an Electronic Hydraulic Fuel Injection System. Droplet size was measured with the immersion liquid sampling technique. The immersion liquid was used a mixture of water-methycellulose solution and ethanol. The Sauter Mean Diameter decreased with increasing injection pressure, with a decrease environmental pressure (back pressure) and nozzle diameter. Increasing the injection pressure makes the fuel density distribution of the spray more homogeneous. An empirical correlation was developed among injection pressure, air density, nozzle diameter and the Sauter Mean Diameter of spray droplets.

• 한국재료학회지
• /
• 제30권2호
• /
• pp.57-60
• /
• 2020

Titanium aluminides have attracted special interest as light-weight/high-temperature materials for structural applications. The major problem limiting practical use of these compounds is their poor ductility and formability. The powder metallurgy processing route has been an attractive alternative for such materials. A mixture of Ti and Al elemental powders was fabricated to a mechanical alloying process. The processed powder was hot pressed in a vacuum, and a fully densified compact with ultra-fine grain structure consisting of Ti₃Al intermetallic compound was obtained. During the compressive deformation of the compact at 1173 K, typical dynamic recrystallization (DR), which introduces a certain extent of grain refinement, was observed. The compact had high density and consisted of an ultra-fine equiaxial grain structure. Average grain diameter was 1.5 ㎛. Typical TEM micrographs depicting the internal structure of the specimen deformed to 0.09 true strain are provided, in which it can be seen that many small recrystallized grains having no apparent dislocation structure are generated at grain boundaries where well-developed dislocations with high density are observed in the neighboring grains. The compact showed a large m-value such as 0.44 at 1173 K. Moreover, the grain structure remained equiaxed during deformation at this temperature. Therefore, the compressive deformation of the compact was presumed to progress by superplastic flow, primarily controlled by DR.

• 한국가스학회지
• /
• 제14권3호
• /
• pp.8-13
• /
• 2010

최근 석유에너지의 대체에너지로 수소에 대해 사회적인 관심이 높아짐에 따라, 수소의 연소특성에 관한 연구가 많이 진행되고 있다. 하지만, 수소화염의 온도는 고온이며, 전파속도가 빠르며, 수소화염은 가시광을 거의 방출하지 않기 때문에 화염의 특성을 파악하는 것이 쉽지 않다. 본 연구에서는 직경12.7, 25.4, 50.8 ${\mu}m$인 3종류의 극세선 열전대를 이용하여 화염의 도달시간 및 온도를 동시에 측정하였다. 이론혼합농도에서의 화염도달시간을 검출한 결과, 빠른 수소화염의 전파속도를 정밀히 측정할 수 있음이 확인되었다. 또한, 열전대의 시정수를 고려함으로써, 화염온도를 추측하는 것이 가능함을 확인했다.

• 공업화학
• /
• 제16권3호
• /
• pp.305-311
• /
• 2005

열플라즈마 공정은 고온, 고활성, 초급냉 등의 탁월한 특징을 갖고 있으며, 다양한 분야에 적용되고 있다. 본 총설에서는 열플라즈마 공정의 특징과 초미립 분말의 제조를 위한 시스템의 구성을 기술한다. 여기에는 금속, 세라믹, 복합 초미립 분말이 포함되며, 공정의 개발을 위하여 요구되는 핵심기술에 대하여 논의한다. 저자 등은 열플라즈마를 이용하여 다양한 형태의 고품질 초미립 분말을 제조하는 공정의 가능성을 제시하고자 하였다.

• 한국분무공학회지
• /
• 제20권1호
• /
• pp.43-52
• /
• 2015

Experimental study was conducted to investigate the effects of ultra-high injection pressure and nozzle hole diameter on diesel flow and spray characteristics. Electronically controlled ultra-high pressure fuel injection system was made to supply the fuel of ultra-high pressure consistently. Three injection pressures, 80, 160, and 250MPa were applied. Four type of injectors with identical eight nozzle holes were used. The four injectors have nozzle hole diameters of 115, 105, 95, and $85{\mu}m$ respectively. Injection quantity and rate were measured to investigate flow characteristics according to injection pressures and nozzle hole diameters. Mie-scattering and shadowgraph were performed to visualize liquid and vapor phases of diesel spray in a constant volume combustion chamber (CVCC). Ambient conditions of high pressure and high temperature in a diesel engine were simulated by using CVCC.

• 열처리공학회지
• /
• 제17권2호
• /
• pp.78-86
• /
• 2004

Effects of the annealing parameters on the formation of ferrites transformed at low temperatures were studied in cold-rolled ultra low carbon steels with niobium and/or chromium. Niobium and chromium were found to be effective in the formation of the low temperature transformation ferrites. The low temperature transformation ferrites more easily formed when both higher annealing temperature and longer annealing time, allowing substitutional alloying elements to distribute between phases, are in combination with faster cooling rate. It was found from EBSD study that the additions of niobium or chromium resulted in the increase in the numbers of high angle grain boundaries and the decrease in those of the low angle grain boundaries in the microstructures. Both granular bainitic ferrite and bainitic ferrite were characterized by the not clearly etched grain boundaries in light microscopy because of the low angle grain boundaries.

• Advances in concrete construction
• /
• 제9권5호
• /
• pp.459-467
• /
• 2020

Mechanical and thermal properties of composite sandwich wall panels are affected by changes in their external environment. Humidity and temperature changes induce stress on wall panels and their core connectors. Under the action of ambient temperature, temperature on the outer layer of the wall panel changes greatly, while that on the inner layer only changes slightly. As a result, stress concentration exists at the intersection of the connector and the wall blade. In this paper, temperature field and stress field distribution of UHPC-RW-RC (Ultra-High Performance Concrete - Rock Wool - Reinforced Concrete) wall panel under high temperature-sprinkling and heating-freezing conditions were investigated by using the general finite element software ABAQUS. Additionally, design of the connection between the wall panel and the main structure is proposed. Findings may serve as a scientific reference for design of high performance composite sandwich wall panels.

• 한국축산식품학회지
• /
• 제40권5호
• /
• pp.734-745
• /
• 2020

Commercially sterilized ultra high temperature (UHT) milk was manufactured at different homogenization pressures (20, 25, and 30 MPa), and changes in fat particle size, mechanical stress-induced fat aggregation, plasmin activity, and lipid oxidation were monitored during ambient storage of the UHT milk for up to 16 wk. The particle sizes of milk fat globules were significantly decreased as homogenization pressure increased from 20 to 30 MPa (p<0.05). The presence of mechanical stress-induced fat aggregates in milk produced at 20 MPa was significantly higher than for UHT milk produced at either 25 or 30 MPa. This difference was maintained all throughout the storage. There were no significant differences in plasmin activity, trichloroacetic acid (12%, w/v) soluble peptides, and the extent of lipid oxidation. Based on these results, an increase of homogenization pressure from 20 (the typical homogenization pressure employed in the Korea dairy industry) to 25-30 MPa significantly decreased mechanical stress-induced fat aggregation without affecting susceptibility to lipid oxidation during storage.