• Journal of the Korea institute for structural maintenance and inspection
• /
• v.16 no.3
• /
• pp.60-66
• /
• 2012

This paper aims to constitute a feedback vibration control system using wireless sensor networks and experiment it on a model structure to verify its effectiveness. For the purpose, we set up a feedback vibration control system composed of a wireless input/output(I/O) sensor node based on bluetooth, a home-made shear type MR damper, a shaker which generates a constant size of sine wave, and a simple beam model structure. The vibration control experiment was performed by shaking the 1/4 point of beam with a shaker. At the moment of shaking, we controled the vibration with MR damper which was placed vertically on the center of beam. Simultaneously, by acquiring acceleration response at the 2/4 point of beam, we evaluated the effectiveness of control capability. The control command was set to send a voltage signal to MR damper when the acceleration response, acquired from the wireless I/O sensor node placed at the center of beam, was more than a certain amount. Although the realtime feedback vibration control system constituted in this paper is effective only within a limited command system, it has been proven that the system was able to effectively decrease the vibration of structure by generating a control command aimed for realtime purpose. The system also showed a possibility to be used as a structural response control system adapting a variety of semi-active control algorithm.

• Korean Journal of Environmental Agriculture
• /
• v.17 no.2
• /
• pp.164-169
• /
• 1998

In order to evaluate the utility of the bituminous coal fly ash, gypsum, oyster shell as soil amendments, acid sandy loam soil with low boron content were amended in the upper 15cm with amendments, and then chinese cabbage was cultivated in fall. Amendments treated were, in metric tons per hectare, i ) none(Check) ; ii) 80 fly ash(FA) ; iii) 4shell(SH) ; iv) 56 fly ash+24gypsum (FG) ; v) 40 fiy ash + 24 gypsum +0.8 shell(FGS). On the whole, amendments imoroved soil chemical properties and contents of N, P, K, Ca, and B in leaves. Among treatmens, FA prominently neutralized soil pH and increased available $P_2O_5$ ,B but decreased Fe contents in soils. FGS also affected the increment of exchangeable Ca, Mg, and available B. Yield response in fresh weight of chinese cabbage was in order of 85% for FGS>77% for FG>66% FA>5% for SH plants. Reducing sugar and vitamin-C contents of leaves depending on treatments showed the same tendencies as that in yields, whereas crude fiber opposite to theme. In particular, FA, FG, and FGS plants showed normal growth without boron deficiency symotoms which appeared in Check and SH plants.Taken together, FGS was an effective combination enable to maximize the utility of fly ash, gypsum, and shell as soil amemdments, especially in cabbage yield and quality.

• Korean Journal of Soil Science and Fertilizer
• /
• v.44 no.3
• /
• pp.465-472
• /
• 2011

To investigate the effect of inorganic ($GeO_2$) and organic (Ge-132) germanium treatment on Brasica juncea C. plant, growth characteristics and Ge contents were examined with various inorganic or organic germanium treatments (0, 5, 10, 25, 50, 75 and $100mg\;L^{-1}$), respectively. Brasica juncea C. growth did not much inhibited until Ge $10mg\;L^{-1}$ concentration under both Ge-132 and $GeO_2$ treatments as compared to control. On the other hand, at Ge concentration higher than $25mg\;L^{-1}$ concentration, Brasica juncea C. growth was inhibited under both Ge-132 and $GeO_2$ treatments. Under treatment of $GeO_2$, length of root and shoot slightly increased until $5mg\;L^{-1}$ concentration and dry weight slightly increased until $10mg\;L^{-1}$ concentration. Under treatment of Ge-132, length of root and shoot slightly increased until $10mg\;L^{-1}$ concentration and dry weight slightly increased until $25mg\;L^{-1}$ concentration. Total Ge contents in Brasica juncea C. early seedlings with $GeO_2$ treatment were a bit higher than those with Ge-132 treatment. Germanium was primarily accumulated in the roots (77%) with organic Ge (Ge-132) treatments, whereas Ge was primarily accumulated in the leaf (70%, respectively) with $GeO_2$ treatments. The Ge uptake rates in inorganic Ge treatments were slightly high than those in organic Ge treatments. Under inorganic Ge treatment with $2.5mg\;L^{-1}$, about 3% of Ge was accumulated into plant and distribution in leaf and root was 84.8% and 15.2%, respectively. Under organic Ge treatment with $2.5mg\;L^{-1}$, about 2.6% of Ge was accumulated into plant and distribution in leaf and root was 66.4% and 33.6%, respectively.

• Journal of Periodontal and Implant Science
• /
• v.37 no.2
• /
• pp.277-286
• /
• 2007

The edentulous posterior maxilla generally provides a limited amount of bone height because of atrophy of the ridge and pneumatization of the maxillary sinus, Maxillary sinus augmentation is one of the surgical techniques for reconstruction of the severely resorbed posterior maxilla. The purpose of this study was to evaluate the survival rate of implants and the long-term changes of graft height after maxillary sinus augmentation by lateral window approach. From September 1996 to July 2004, maxillary sinus augmentation with mixed grafts of autograft, allograft, xenograft and alloplast were performed on 45 patients and 100 implants were placed. We evaluated the survival rate of implants and the changes of BL(bone length)/IL(implant length) according to time using panoramic radiographs. The survival rate of implants was 91.0% for follow-up period. The mean reduction of graft heights was 0.34mm(3.0%) for 6 months and 1.22mm(1O.66%) for 3 years after augmentation. The total mean BL/IL was $1.34{\pm}0.21$ during 5 year observation period after augmentation and decreased slightly over time. The result means that graft materials were stable above the implant apex. BL/ILs of 1stage procedure were significantly decreased at 1-2 year, 3-4 year after augmentation and no statistically significant changes were observed in those of 2 stage procedure. The graft materials of both procedures were stable above the implant apex. No statistically significant changes of BL/IL were observed in the grafts combined with low amount of autogenous bone or without autogenous bone. The graft materials of both groups were stable above the implant apex. The results indicated that the placement of dental implants with maxillary sinus augmentation showed predictable clinical results and the grafts combined with low amount of autogenous bone or without autogenous bone had long-term resistance to resorption in maxillary sinus.