• 터널과지하공간
• /
• 제7권3호
• /
• pp.202-207
• /
• 1997

Jointed rock is often modeled using ubiquitious joint models, anisotropic plasticity models with yield condions that simulate slip along joint sets. In this paper, a ubiquitous joint model is derived for a rock mass cut by two sets of continuous joints. The model is used to compute the bearing capacity of a footing resting on jointed rock. Comparison to a series of Distinct Element simulations with different joint spacings, suggests that ubiquitous joint modles are only appropriate when the joint spacing is small.

• 터널과지하공간
• /
• 제8권4호
• /
• pp.287-295
• /
• 1998

흙 사면의 안정성 해석에는 한계평형법이 널리 사용되고 있다. 그러나 절 리가 발달한 암반사면의 파괴는 절리의 거동에 지배를 받으므로 절리의 방향성과 파괴특성이 동시에 고려되어야 한다. 본 논문에서는 이러한 암반사면의 안정성해석을 위하여 임의방향으로 발달한 두 조의 절리군을 고려할 수 있는 편재절리모델을 사용하여 사면과 절리의 상대적인 방향성이 사면의 안전율에 어떠한 영향을 주는지 살펴보았다. 이를 위하여 이미 개발된 바 있는 비등방 탄소성 모델을 사면안정 해석에 적용할 수 있도록 수정하였으며, 안전율 계산 routine을 상용프로그램인 FLAC인 FISH macro 언어를 사용하여 작성하였다. 개발된 모델의 검증을 위하여 1요소에 대한 직접전단시험을 수치해석적으로 수행하였고, 안전율이 1인 흙사면을 선택하여 서로 수직인 2조의 절리군이 발달한 암반의 안정성 해석을 수행하여 Culmann의 평면파괴해와 비교하였다. 또한 UDEC에 의한 해석을 수행하여 사면파괴양상을 비교하였다. 절리의 간격이 충분히 작을 경우 편재절리모델은 정확한 결과를 나타내어 절리암반사면의 설계 및 안정성 해석에 활용될 수 있을 것으로 생각된다.

• 터널과지하공간
• /
• 제11권3호
• /
• pp.279-288
• /
• 2001

절리가 발달한 암반의 거동평가를 위한 해석적 방법은 연속체 모델과 불연속체 모델을 사용하는 방법으로 대별할 수 있으며, 연속체 모델을 사용할 경우에는 유한요소법이나 유한차분법을 이용하는 방법이 주로 사용되고 있다. 불연속체 모델은 개별 블록들의 움직임을 일일이 계산하므로 매우 매력적인 방법이지만 현재의 지반조사 기술수준으로는 지반내의 발달된 절리를 개별적으로 정확히 파악하기가 매우 어려우며, 컴퓨터의 계산용량이 너무 과다해지는 단점이 있다. 더욱이 2조 이상의 주절리군을 갖는 절리암반의 경우, 개별 블록의 거동을 모델링하는 것은 불가능하다. 따라서, 불연속편을 포함한 암반을 연속체로 가정한 편재절리 모델(ubiquitous joint model)을 이용한 연구가 요구된다. 터널의 경우에는 사면의 경우와는 달리 파괴면의 형상을 사전에 가정하기 어렵기 때문에 한계평형법에 기초한 해석법등을 적용하여 안전율을 구하기가 곤란하다. 이러한 이유에서 터널을 대상으로 한 수치해석은 안전율을 구하기보다는 안정성을 평가하는 데만 제한적으로 사용되어 왔다. 본 논문에서는 2조의 절리군을 고려할 수 있는 편재절리모델을 이용하여 절리암반터널의 거동이 평가되었고, 수치해석에 의해 터널의 안전율을 구하는 방법이 제시되었다. 이를 위해, 강도감소기법이 사용되었다.

• 한국지반공학회논문집
• /
• 제24권5호
• /
• pp.65-78
• /
• 2008

절토사면 및 천심도 터널의 경우 불연속면을 따른 블록의 미끄러짐 및 회전 등이 안정성에 큰 영향을 미친다. 절토사면이나 터널의 초기 설계 단계에서 안정성 검토를 위해 수치해석을 널리 사용하는데, 대부분의 상용화된 프로그램들은 연속체 해석에 기반을 두고 있다. 불연속면을 고려하여 연속체 해석을 수행할 수도 있으며, 절리를 포함한 암반자체의 강도를 감소시킴으로써 모사하는 것이 대표적인 방법이다. 또한, 연속체 해석방법인 Mohr-Coulomb 모델에 편재 절리모델 (ubiquitous joint model)을 적용함으로써 불연속면을 고려하는 방법이 있다. 절토사면의 수치해석시 주 입력치인 절리암반의 점착력, 마찰각, 탄성계수 등은 암반분류법(rock classification system)에 의한 경험식으로 도출할 수 있으며, 본 논문에서는 이 중 RMR 및 GSI 시스템에 의한 경험식을 통해 얻은 입력치를 실제 위험절토사면에 적용함으로써 두 시스템의 차이를 비교해 보고자 하였다. 또한 RMR 및 GSI 시스템으로 도출한 입력치에 편재절리모델을 혼합하여 적용함으로써 계측을 통해 얻은 변위량 및 변위양상과의 차이를 분석하였다. 분석 결과 GSI 시스템으로 도출한 입력치에 편재절리모델을 혼합하였을 경우의 수치해석결과가 실제현장의 변위량 및 변위양상과 가장 유사한 결과를 얻을 수 있음을 확인할 수 있었다.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제11권1호
• /
• pp.193-214
• /
• 2017

In this paper, we study the problem of network utility maximization in a CSMA based multi-hop wireless network. Existing work in this aspect typically adopted continuous time Markov model for performance modelling, which fails to consider the channel conflict impact in actual CSMA networks. To maximize the utility of a CSMA based wireless network with channel conflict, in this paper, we first model its weighted network capacity (i.e., network capacity weighted by link queue length) and then propose a distributed link scheduling algorithm, called CSMA based Maximal-Weight Scheduling (C-MWS), to maximize the weighted network capacity. We derive the upper and lower bounds of network utility based on C-MWS. The derived bounds can help us to tune the C-MWS parameters for C-MWS to work in a distributed wireless network. Simulation results show that the joint optimization based on C-MWS can achieve near-optimal network utility when appropriate algorithm parameters are chosen and also show that the derived utility upper bound is very tight.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 1994년도 가을 학술발표회 논문집
• /
• pp.149-157
• /
• 1994

In this study two dimensional visco-plastic finite element model capable of handling the multi-step excavation was developed for investigating the effect of excavation support sequences on the behavior of underground openings in the jointed rock mass. First, the finite element model which is capable of handling the multi-step excavation is developed and verified. And then the model is combined with visco-plastic joint model. Ubiquitous joint pattern was considered in the model and joint properties in cach set were assumed to be indentical. Passive, full-grouted rockbolts were cosidered in the numerical model. The visco-plastic deformations of joints and rockbolts were assumed to be governed by Mohr-Conlomb and von Mises yield criteria, respectively. With the ability of removing elements, the model can simulate the multi-step excavation-suppport sequences. The reliability and applicability of the model to the stability analysis for the underground excavation in pratice was checked by simulating the behavior of underground crude oil storage caverns under construction.

• Geomechanics and Engineering
• /
• 제21권6호
• /
• pp.551-564
• /
• 2020

High-stress and complex geological conditions impose great challenges to maintain excavation stability during deep underground mining. In this research, large anisotropic deformation and its management by support system at a deep underground mine in Western Australia were simulated through three-dimensional finite-difference model. The ubiquitous-joint model was used and calibrated in FLAC3D to reproduce the deformation and failure characteristics of the excavation based on the field monitoring results. After modeling verification, the roles of mining depth also the intercept angle between excavation axis and foliation orientation on the deformation and damage were studied. Based on the results, quantitative relationships between key factors and damage classifications were presented, which can be used as an engineering tool. Subsequently, the performance of support system installation sequences was simulated and compared at four different scenarios. The results show that, first surface support and then reinforcement installation can obtain a better controlling effect. Finally, the influence of bolt spacing and ring spacing were also discussed. The outcomes obtained in this research may play a meaningful reference for facing the challenges in thin-bedded or foliated ground conditions.

• 터널과지하공간
• /
• 제5권2호
• /
• pp.123-133
• /
• 1995

A two dimensional visco-plastic finite element model capable of handling the multistep excavaton was developed for investigating the effect of excavation-support sequences on the behaviour of underground openings in the jointed rock mass. Ubiquitous joint pattern was considered in the model and joint properties in each set were assumed to be identical. Passive, fully-grouted rockbolts were considered in the model. Visco-plastic deformations of joints and rockbolts were assumed to be governed by Mohr-Coulomb and von Mises yield criteria, respectively. With the ability of removing elements, the model can von Mises yield criteria, respectively. With the ability of removing elements, the model can simulate the multi-step excavation-support sequences. The reliability of the model to the stability analysis for the underground excavation in practice was checked by simulating the behavior of underground crude oil storage caverns under construction.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2007년도 심포지엄 논문집 정보 및 제어부문
• /
• pp.219-221
• /
• 2007

Recent changes to ubiquitous computing requires more natural human-computer(HCI) interfaces that provide high information accessibility. Hand-gesture, i.e., gestures performed by one 'or two hands, is emerging as a viable technology to complement or replace conventional HCI technology. This paper deals with hand-posture recognition. Hand-posture database construction is important in hand-posture recognition. Human hand is composed of 27 bones and the movement of each joint is modeled by 23 degrees of freedom. Even for the same hand-posture,. grabbed images may differ depending on user's characteristic and relative position between the hand and cameras. To solve the difficulty in defining hand-postures and construct database effective in size, we present a method using a 3D hand model. Hand joint angles for each hand-posture and corresponding silhouette images from many viewpoints by projecting the model into image planes are used to construct the ?database. The proposed method does not require additional equations to define movement constraints of each joint. Also using the method, it is easy to get images of one hand-posture from many vi.ewpoints and distances. Hence it is possible to construct database more precisely and concretely. The validity of the method is evaluated by applying it to the hand-posture recognition system.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제6권1호
• /
• pp.98-115
• /
• 2012

New trend called ubiquitous leads the recent business by standardization and integration. It should be the main issue how to guarantee the integration and accountability on each business, especially in mission critical system which is mainly supported by M2M (Machine to Machine) control mechanism. This study is from the analysis of digital forensics case study that is from the M2M Sensing Control Mechanism problem of the "Imjin River" case in 2009, where a group of family is swept away to death by water due to M2M control error. The ubiquitous surroundings bring the changes in the field of criminal investigation to real time controls such as M2M systems. The needs of digital forensics on M2M control are increasing on every crime scene but we suffer from the lack of control metrics to get this done efficiently. The court asks for more accurately analyzed results accounting high quality product development design. Investigators in the crime scene need real-time analysis against the crime caused by poor quality of mission critical systems. It seems to be every need of Real-Time-Enterprise, so called ubiquitous society on the case. We try to find the efficiency and productivity in discovering non-functional design defects in M2M convergence products focusing on three metrics in study model with quick implementation. Digital forensics system in present status depends on know-how of each investigator and is hard to expect professional analysis on every field. This study set up a hypothesis "Co-working of professional investigators on each field will qualify Performance and Integrity" especially in mission critical system such as M2M and suggests "Online co-work analysis model" to efficiently detect and prevent mission critical errors in advance. At the conclusion, this study proved the statistical research that was surveyed by digital forensics specialists around M2M crime scene cases with quick implementation of dash board.