• 제목/요약/키워드: UV-spectroscopic

검색결과 341건 처리시간 0.019초

하천 분광특성을 이용한 수질항목 모니터링 연구 - 울산 지역 (Monitoring of Water Quality Parameters using Spectroscopic Characteristics of River Water - Ulsan Area)

  • 허진;김미경;신재기
    • 한국물환경학회지
    • /
    • 제23권6호
    • /
    • pp.863-871
    • /
    • 2007
  • Spectroscopic characteristics of river water from four major watersheds in the Ulsan area were measured to examine their potential for estimating water quality parameters. The total 176 river samples were collected from 44 sites of small streams within the watersheds during the year 2006. Spectroscopic characteristics investigated included protein-like fluorescence (FLF) intensity, fulvic-like fluorescence (FLF) intensity, terrestrial humic-like fluorescence (TLF) intensity, UV absorbance at 254 nm, and UV absorbance difference at 220 nm and 254 nm. Protein-like fluorescence intensity showed linear relationships with biochemical oxygen demand (BOD), chemical oxygen demand (COD), total phosphorous (TP) concentrations of the samples with the correlation of 0.784, 0.779, and 0.733, respectively. Due to the UV absorption characteristics of nitrate at 220 nm, UV absorbance difference at 220 nm and 254 nm was selected to represent total nitrogen (TN) concentration. Exclusion of some samples with PLF intensity higher than 5.0 improved the correlation between the UV absorbance difference and TN as demonstrated by the increase of the correlation coefficient from 0.392 to 0.784. Instead, for the samples with PLF intensity lower than 5.0, the highest correlation of TN was achieved with UV absorbance at 254 nm. The results suggest that PLF intensity could be used as the estimation index for BOD, COD, and TP concentration of river water, and as the primary screening index for the prediction of TN using UV absorbance difference. Some BOD-based water quality levels among the river water were statistically discriminated by the PLF intensity. Low p-values were obtained from the t-tests on the samples with the first level and the second level (p=0.0003) and the samples with the second and the third levels (p=0.0413). Our combined results demonstrated that the selected spectroscopic characteristics of river water could be utilized as a tool for on-site real-time monitoring and/or the primary estimation of water quality.

다양한 환경요인과 난분해성 유기물에 따른 고온산화 및 UV산화방식 총 유기탄소 산화율 변화 (Influences of Environmental Conditions and Refractory Organic Matters on Organic Carbon Oxidation Rates Measured by a High Temperature Combustion and a UV-sulfate Methods)

  • 정헌재;이보미;이근헌;신현상;허진
    • 한국물환경학회지
    • /
    • 제32권1호
    • /
    • pp.98-107
    • /
    • 2016
  • This study examined the effects of environmental conditions and the presence of refractory organic matter on oxidation rates of total organic carbon (TOC) measurements based on high temperature combustion and ultraviolet-sulfate methods. Spectroscopic indices for prediction of oxidation rates were also explored using the UV spectra and fluorescence excitation-emission matrix (EEM) of humic acids. Furthermore, optimum TOC instrument conditions were suggested by comparing oxidation rates of a standard TOC material under various conditions. Environmental conditions included salts, reduced ions, and suspended solids. Salts had the greatest influence on oxidation rates in the UV-sulfate method. However, no effect was detected in the high temperature combustion method. The UV-sulfate method showed lower humic substance oxidation rates, refractory natural organic matter, compared to the other methods. TOC oxidation rates for the UV-sulfate method were negatively correlated with higher specific-UV absorbance, humification index, and humic-like EEM peak intensities, suggesting that these spectroscopic indices could be used to predict TOC oxidation rates. TOC signals from instruments using the UV-sulfate method increased with increasing chamber temperature and increasing UV exposure durations. Signals were more sensitive to the former condition, suggesting that chamber temperature is important for improving the TOC oxidation rates of refractory organic matter.

박테리오파지 f2에 대한 자외광선의 살균효과 (The Inactivation Effects of UV Light on Bacteriophage f2)

  • Kim, Chi-Kyung;Quae Chae
    • 한국미생물·생명공학회지
    • /
    • 제11권3호
    • /
    • pp.155-161
    • /
    • 1983
  • Bacteriophage f2에 대한 자외광선의 살균효과와 외투막 단백질의 구조에 미치는 영향을 Ray-onet photoreactor PPR-208을 사용하여 300nm의 광선으로 연구하였다. 처음 20분간의 조사에서는 약 4 log의 phage가 감소되고 그후 완만한 살균효과를 보이다가 90분 이상의 조사에서는 생존 바이러스가 발견되지 않았다. Tryptophan residue의 fluorescenve quenching, 자외선으로 조신한 phage에 부착시킨 ANS (8-anilino-1-napht-halene sulfonate)의 fluorescence emission의 감소, tryptophan에서 ANS로의 energy transfer 의 감소 등 spectroscopic technique에 의한 결과와 자외선 조사에 의하여 단백질 외투만이 파손되는 전자현미경 관찰의 결과에 의하여 자외광선은 phage f2의 외투막 단백질의 구조에 변화를 일으킨다는 것이 밝혀졌다.

  • PDF

Adsorption Kinetics for Polymeric Additives in Papermaking Aqueous Fibrous Media by UV Spectroscopic Analysis

  • Yoon, Sung-Hoon;Chai, Xin-Sheng
    • Bulletin of the Korean Chemical Society
    • /
    • 제27권11호
    • /
    • pp.1819-1824
    • /
    • 2006
  • The general objective of the present study was to investigate the potential application of the UV spectroscopic method for determination of the polymeric additives present in papermaking fibrous stock solutions. The study also intended to establish the surface-chemical retention model associated with the adsorption kinetics of additives on fiber surfaces. Polyamide epichlorohydrin (PAE) wet strength resin and imidazolinium quaternary (IZQ) softening agents were selected to evaluate the analytical method. Concentrations of PAE and IZQ in solution were proportional to the UV absorption at 314 and 400 nm, respectively. The time-dependent behavior of polymeric additives obeyed a mono-molecular layer adsorption as characterized in Langmuir-type expression. The kinetic modeling for polymeric adsorption on fiber surfaces was based on a concept that polymeric adsorption on fiber surfaces has two distinguishable stages including initial dynamic adsorption phase and the final near-equilibrium state. The simulation model predicted not only the real-time additive adsorption behavior for polymeric additives at high accuracy once the kinetic parameters were determined, but showed a good agreement with the experimental data. The spectroscopic method examined on the PAE and IZQ adsorption study could potentially be considered as an effective tool for the wet-end retention control as applied to the paper industry.

Near-IR 분광법을 이용한 광 경화 중합반응 관찰 (Monitoring photo-polymerization reaction using near-IR spectroscopic technique)

  • 정수정;홍진후;유정아
    • 분석과학
    • /
    • 제15권4호
    • /
    • pp.341-345
    • /
    • 2002
  • UV 광 중합 반응의 진행정도를 near-IR 분광학적 방법을 사용하여 관찰하였다. 광중합반응의 반응체는 4차 암모늄염을 포함하고 있는 아크릴 모노머를 사용하였으며 광 개시제로는 Darocur 1174를 사용하였다. 반응의 진척도는 광중합 반응의 정도를 나타내 주는 척도가 되는 중합 반응체인 아크릴 모노머의 -C=$CH_2$ 기와 관련된 흡수 띠인 1615 nm(6190 $cm^{-1}$)와 2105 nm(4750 $cm^{-1}$)에서 관찰된 띠 세기의 전환율로부터 구하였다. Near-IR 분광법이 광 중합 반응의 진행정도를 관찰하는데 효과적인 방법이 될 수 있음을 알 수 있었다.

ULTRAVIOLET AND VISIBLE SPECTROSCOPIC DATABASE FOR ATOMS AND MOLECULES IN CELESTIAL OBJETS

  • Kim, Sang-J.
    • 천문학논총
    • /
    • 제9권1호
    • /
    • pp.111-166
    • /
    • 1994
  • I have developed a UV and visible spectroscopic database (UVSD) for atoms and molecules, which are found in interstellar medium, stars, galaxies, and in the atmospheres of the earth, planets, satellites, and comets. This UV and visible database, which is machine-readable, consists of three different sub-databases depending upon the characteristics of the sub-databases: (A) atomic and molecular line listings from laboratory observations or theoretical studies; (B) absorption spectra measured in laboratories; and (C) solar UV, visible, and infrared spectral atlases. The UVSD is in a very initial stage of development compared with other well organized and established infrared and microwave databases. In order to make a good quality and complete database, substantial efforts should be made for the acquisition of scattered important data from laboratories or institutions, and then the acquired heterogeneous data should be peer-reviewed and standardized.

  • PDF

The Effect of Salt and pH on the Phase Transition Behaviors of pH and Temperature-Responsive Poly(N,N-diethylacrylamide-co-methylacrylic acid)

  • Liu, Tonghuan;Fang, Jian;Zhang, Yaping;Zeng, Zhengzhi
    • Macromolecular Research
    • /
    • 제16권8호
    • /
    • pp.670-675
    • /
    • 2008
  • A series of pH and temperature-responsive (N,N-diethylacrylamide-co-methylacrylic acid) copolymers were synthesized by radical copolymerization and characterized by elemental analysis, Fourier-transform infrared (FT-IR), nuclear magnetic resonance (NMR) $^1H$, $^{13}C$ and LLS. The effects of salt and pH on the phase transition behaviors of the copolymers were investigated by uv. With increasing NaCl concentration, significant salt effects on their phase transition behaviors were observed. UV spectroscopic studies showed that the phase transition became faster with increasing NaCl concentration. In addition, the phase transition behaviors of copolymers were sensitive to pH. The pH and temperature sensitivity of these copolymers would make an interesting drug delivery system.

Effect of Photopolymerization on the Rate of Photocrosslink in Chalcone-based Oligomeric Compounds

  • 최동훈;오상준;반시영;오광용
    • Bulletin of the Korean Chemical Society
    • /
    • 제22권11호
    • /
    • pp.1207-1212
    • /
    • 2001
  • A new photochemically bifunctional epoxy and dimethacrylate compounds were synthesized for investigating the photosensitivity under UV irradiation. Photosensitivity of the synthesized chalcone-based compounds was investigated by using UV-visible absorption and Fourier transformed infrared (FT-IR) spectroscopies. The result of spectroscopic analysis substantiated that the two chalcone-based compounds have functions of both photocrosslinking and photopolymerization by UV exposure in the presence of photoinitiator. Two kinds of photochemical reactions proceeded competitively during UV exposure. Particularly, we studied the effect of photopolymerization on the rate of photocrosslink due to cycloaddition in the two oligomeric compounds.