• Nuclear Engineering and Technology
• /
• v.55 no.12
• /
• pp.4642-4646
• /
• 2023

The Tb³⁺ or Eu³⁺-doped Lu₂Gd₁Ga₂Al₃O₁₂ phosphor were fabricated by funace at 1500 ℃ for 12 h using a solid state reaction. The XRD (X-ray diffraction_Panalytical X'Pert Pro) and FE-SEM (field emission scanning electron microscope) are measured to confirm the crystalline structure and surface morphology of the phosphor. The Tb³⁺-doped Lu₂Gd₁Ga₂Al₃O₁₂ phosphor emits the lights in 470~650 nm wavelength range due to transitions from ⁵D₄ to ⁷F_j. Therefore, it shows the green region in the CIE chromaticity diagram under both UV and X-rays excitations. The Eu³⁺-doped Lu₂Gd₁Ga₂Al₃O₁₂ phosphor emits the lights in 550~750 nm wavelength range because of ⁵D_i to ⁷F_j. The emission is confirmed to be in the red region using the CIE chromaticity diagram. The Tb³⁺ or Eu³⁺-doped Lu₂Gd₁Ga₂Al₃O₁₂ phosphor shows the characteristic f-f transition with a long decay time, which is about several milliseconds. They have the high efficiency of light emission for X-ray because of their high effective Z number (Z_eff = 58.5) and density. Therefore, they are very much promising phosphors for X-ray imaging application in medical fields.

• Microbiology and Biotechnology Letters
• /
• v.41 no.4
• /
• pp.449-455
• /
• 2013

Human skin is constantly exposed to environmental conditions such as UV rays, polluted air, and chemical products. UV rays, in particular, affect skin in many ways causing wrinkles, fine wrinkles, rough skin, and xeroderma through a skin aging process. The purpose of this study was to investigate the anti-wrinkling effect of Juniperus rigida Sieb., derived from a common cedar tree found the world over. Measuring the elastase to investigate wrinkling efficacy, it was shown that at a concentration level of $1,000{\mu}g/ml$ of the two extracts, the water extract exhibited a lower than 10% inhibition activity, while the ethanol extract exhibited a 68.5% inhibition activity. Collagenase inhibition activity in the water extract and ethanol extract were 44.9% in the former and 97.2% in the latter extract, which in the case of the ethanol extract, is similar to ascorbic acid (99.6%). Moreover, measuring the biosynthesis of collagen by fibroblast, a concentration level of $50{\mu}g/ml$ of ethanol extract produced 151.52% of biosynthetic promotion, proving that the ethanol extract acts as a superb anti-wrinkling agent. The result of an investigation conducted on the influence of the ethanol extract on MMP-1 caused by UVA showed that at a concentration level of $1,00{\mu}g/ml$ of the ethanol extract of J. rigida Sieb a 67.1% inhibition activity was noted. At a concentration level of $50{\mu}g/ml$ of the ethanol extract of J. rigida Sieb a 35% and 39% inhibition ratio to MMP-1 protein and mRNA were observed respectively, thereby restraining the appearance of the collagen breakdown enzyme MMP-1 and wrinkle creation by skin photo-aging.

• Journal of Conservation Science
• /
• v.31 no.1
• /
• pp.37-46
• /
• 2015

In the case of adhesives & restoration agents currently being used for the preservation treatment of ceramics and earthenware, epoxy type, cellulose type and cellulose type are mainly being used. However, they are showing various problems such as re-detachment from severe contraction, color change from yellowing, work inconvenience of staining on tools and hand during usage and irreversibility. For the purpose of solving the issues of yellowing and irreversibility of epoxy resin being used to restore ceramics, urethane synthetic resin with low yellowing excellent reversibility has been developed in this study. The adhesive strength of urethane resin that has been developed has excellent properties with 2.07MPa for undiluted solution, which is 1.5 times higher than that of existing material EPO-$TEK301^{(R)}$ 1.21MPa. The result of workability measurement showed that the wear rate of urethane resin (in Talc 50wt%) was 1.09%, which was somewhat higher than that of existing material Quick $Wood^{(R)}$ (1.02%). In addition, its wear rate is two times higher than that of $EPO-TEK301^{(R)}$ (0.41%) and $L30^{(R)}$ (0.39%), thereby showing an advantage in its forming process compared to existing materials. As for the advantage of urethane resin of reversibility experiment, 12 hours after acetone, ethyl alcohol deposition, urethane resin and filler talc were dissolved 100% while showing powdering phenomenon. Compared to 0% reversibility of existing epoxy resin, it has much superior reversibility. The result of UV rays experiment to evaluate its durability showed that ${\Delta}E^*ab$ color change value based on undiluted solution of urethane resin was 2.76 before & after UV rays exposure, which was a decrease by about 7-20 times compared to that of existing resin, thereby minimizing the issue of heterogeneity.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.47 no.3
• /
• pp.205-212
• /
• 2021

The skin fibroblasts of different origins showed different expression levels of MMP-1 in response to TNF-α treatment or UV irradiation. We hypothesized that this is caused by polymorphism in the MMP-1 promoter region. To elucidate it, first of all, we analyzed and classified the genotype of the -1607 site of the MMP-1 promoter in 23 commercially available primary fibroblasts, and then we examined the expression of MMP-1 by TNF-α or UVB stimulation for each classified genotype. As a result of the analysis, fibroblasts with 6 1G/1G genotypes, 10 1G/2G genotypes, and 7 2G/2G genotypes were identified. Hs68 and Detroit 551 cell lines were confirmed to have 1G/2G genotypes. In the 1G/1G genotype, MMP-1 was expressed twice as high as that of the control group by TNF-α treatment, and was hardly expressed by UV light. In the case of the 1G/2G genotype, MMP-1 was expressed 2.45 fold higher by TNF-α treatment, and 1.4 fold by UV light than the control. In the case of the 2G/2G genotype, MMP-1 was expressed 1.35 fold by TNF-α treatment, and was highly expressed by 2.5 fold by ultraviolet rays compared to control. It can be estimated that MMP-1 expression is better induced in the 1G genotype by TNF-α and in the 2G genotype by UV light. In addition, it can be presumed that MMP-1 expression is increased by creating a site where the Ets transcription factor can bind by another G inserted at the -1607 position. These studies have not been conducted at all in fibroblasts in relation to skin aging, so it is an area that needs to be further studied in the future. In conclusion, since the skin is an organ that is affected by both intrinsic aging and photoaging at the same time, when analyzing the expression of MMP-1 as a target for improving skin aging, it is necessary to select cells with a genotype suitable for the experimental conditions of the study.

• Journal of Life Science
• /
• v.16 no.3 s.76
• /
• pp.534-539
• /
• 2006

In the ozone disinfection unit process of a piston type batch reactor with continuous ozone analysis using a flow injection analysis (FIA) system, the CT values for 1 log inactivation of Cryptosporidium parvum by viability assays of DAPI/PI and excystation were $1.8{\sim}2.2\;mg/L{\cdot}min$ at $25^{\circ}C$ and $9.1mg/L{\cdot}min$ at $5^{\circ}C$, respectively. At the low temperature, ozone requirement rises $4{\sim}5$ times higher in order to achieve the same level of disinfection at room temperature. In a 40 L scale pilot plant with continuous flow and constant 5 minutes retention time, disinfection effects were evaluated using excystation, DAPI/PI, and cell infection method at the same time. About 0.2 log inactivation of Cryptosporidium by DAPI/PI and excystation assay, and 1.2 log inactivation by cell infectivity assay were estimated, respectively, at the CT value of about $8mg/L{\cdot}min$. The difference between DAPI/PI and excystation assay was not significant in evaluating CT values of Cryptosporidium by ozone in both experiment of the piston and the pilot reactors. However, there was significant difference between viability assay based on the intact cell wall structure and function and infectivity assay based on the developing oocysts to sporozoites and merozoites in the pilot study. The stage of development should be more sensitive to ozone oxidation than cell wall intactness of oocysts. The difference of CT values estimated by viability assay between two studies may partly come from underestimation of the residual ozone concentration due to the manual monitoring in the pilot study, or the difference of the reactor scale (50 mL vs 40 L) and types (batch vs continuous). Adequate If value to disinfect 1 and 2 log scale of Cryptosporidium in UV irradiation process was 25 $mWs/cm^2$ and 50 $mWs/cm^2$, respectively, at $25^{\circ}C$ by DAPI/PI. At $5^{\circ}C$, 40 $mWs/cm^2$ was required for disinfecting 1 log Cryptosporidium, and 80 $mWs/cm^2$ for disinfecting 2 log Cryptosporidium. It was thought that about 60% increase of If value requirement to compensate for the $20^{\circ}C$ decrease in temperature was due to the low voltage low output lamp letting weaker UV rays occur at lower temperatures.

• Journal of Life Science
• /
• v.32 no.5
• /
• pp.331-339
• /
• 2022

Melanin is a pigment produced by melanocytes to protect the skin from external stimuli, mainly ultraviolet (UV) rays. However, abnormal and excessive production of melanin causes hyperpigmentation disorders, such as freckles, age spots, and discoloration. Natural cosmeceuticals are a new trend for treating or preventing hyperpigmentation due to fewer side effects and biocompatibility. In this context, the current study focused on Cnidium japonicum, a halophyte with several uses in folk medicine, to evaluate its potential as a skin-whitening agent. The effect of C. japonicum extract (CJE) on melanin production was analyzed in melanogenesis-stimulated B16F10 melanoma cells. The results showed that CJE successfully inhibited the oxidation of tyrosine and L-DOPA by tyrosinase and subsequently decreased the production of the key enzymes responsible for melanin production: tyrosinase, tyrosinase-related protein-1, and protein-2. This effect was confirmed by decreased intracellular and extracellular melanin levels in B16F10 melanoma cells after CJE treatment. Further experiments to elucidate the action mechanism revealed that CJE treatment suppressed melanin production by inhibiting the activation of glycogen synthase kinase 3 β (GSKβ)/β-catenin and protein kinase A (PKA)/cAMP-response element binding protein (CREB) pathways, which are the upstream activators of melanogenesis. In conclusion, the present study suggests that C. japonicum is a potential natural source of bioactive substances for the development of novel cosmeceuticals that can act against hyperpigmentation.

• Korean Journal of Heritage: History & Science
• /
• v.55 no.2
• /
• pp.200-211
• /
• 2022

The celadon stools with an openwork ring design which consist of four items as one collection were excavated from Gaeseong, Gyeonggi-do Province. The celadon stools were designated and managed as treasures due to their high arthistorical value in the form of demonstrating the excellence of celadon manufacturing techniques and the fanciful lifestyles during the Goryeo Dynasty. However, one of the items, which appeared to have been repaired and restored in the past, suffered a decline in aesthetic value due to the aging of the treatment materials and the lack of skill on the part of the conservator, raising the need for re-treatment as a result of structural instability. An examination of the conservation condition prior to conservation treatment found structural vulnerabilities because physical damage had been artificially inflicted throughout the area that was rendered defective at the time of manufacturing. The bonded surfaces for the cracked areas and detached fragments did not fit, and these areas and fragments had deteriorated because the adhesive trickled down onto the celadon surface or secondary contaminants, such as dust, were on the adhesive surface. The study identified the position, scope, and conditions of the bonded areas at the cracks UV rays and microscopy in order to investigate the condition of repair and restoration. By conducting Fourier-transform infrared spectroscopy(FT-IR) and portable x-ray fluorescence spectroscopy on the materials used for the former conservation treatment, the study confirmed the use of cellulose resins and epoxy resins as adhesives. Furthermore, the analysis revealed the addition of gypsum(CaSO₄·2H₂O) and bone meal(Ca₁₀ (PO₄)₆(OH)₂) to the adhesive to increase the bonding strength of some of the bonded areas that sustained force. Based on the results of the investigation, the conservation treatment for the artifact would focus on completely dismantling the existing bonded areas and then consolidating vulnerable areas through bonding and restoration. After removing and dismantling the prior adhesive used, the celadon stool was separated into 6 large fragments including the top and bottom, the curved legs, and some of the ring design. After dismantling, the remaining adhesive and contaminants were chemically and physically removed, and a steam cleaner was used to clean the fractured surfaces to increase the bonding efficacy of the re-bonding. The bonding of the artifact involved applying the adhesive differently depending on the bonding area and size. The cyanoacrylate resin Loctite 401 was used on the bonding area that held the positions of the fragments, while the acrylic resin Paraloid B-72 20%(in xylene) was treated on cross sections for reversibility in the areas that provided structural stability before bonding the fragments using the epoxy resin Epo-tek 301-2. For areas that would sustain force, as in the top and bottom, kaolin was added to Epo-tek 301-2 in order to reinforce the bonding strength. For the missing parts of the ring design where a continuous pattern could be assumed, a frame was made using SN-sheets, and the ring design was then modeled and restored by connecting the damaged cross section with Wood epos. Other restoration areas that occurred during bonding were treated by being filled with Wood epos for aesthetic and structural stabilization. Restored and filled areas were color-matched to avoid the feeling of disharmony from differences of texture in case of exhibitions in the future. The investigation and treatment process involving a variety of scientific technology was systematically documented so as to be utilized as basic data for the conservation and maintenance.