• 한국전기전자재료학회논문지
• /
• 제16권4호
• /
• pp.272-279
• /
• 2003

In this work Zn$_4$GeSe$_{6}$ :CO$^{2+}$ single crystals were grown by the chemical transport reaction method in which the iodine was used as the transporting agent. The Zn$_4$GeSe$_{6}$ :CO$^{2+}$ single crystal was found to have a monoclinic structure. The optical absorption spectra of grown crystals were investigated using a temperature-controlled UV-VIS -NIR spectrophotometer. The temperature dependence of band-edge absorption was in a good agreement with the Varshni equation. The observed impurity absorption peaks could be explained as arising from the electron transition between energy levels of Co$^{2+}$ ion sited at the T$_{d}$ symmetry point.

• Bulletin of the Korean Chemical Society
• /
• 제29권9호
• /
• pp.1729-1731
• /
• 2008

Colloidal solutions of crystalline PbSe nanoparticles have been synthesized by hot solution chemical process using PbO in oleic acid and tributylphosphine (TBP) bonded selenium. The use of TBP as a capping agent along with oleic acid gives a very good yield (around 10% at 180 ${^{\circ}C}$) with an average diameter of particle of about < 6.6 nm. The effects of temperature on size and production yield of PbSe quantum dots are studied. Xray diffraction (XRD), high-resolution transmission electron microscopy (HRTEM) and UV/VIS/NIR absorption spectroscopy were used to characterize the samples.

• 대한기계학회논문집A
• /
• 제31권4호
• /
• pp.483-489
• /
• 2007

We have investigated quantitative measurement techniques of the degree of dispersion of single-walled carbon nanotubes (SWNTs). SWNTs were suspended in aqueous media using a sodium dodecyl sulfate (SDS) surfactant. SWNTs with different dispersion states were prepared by controlling the intensity and time of sonication and centrifugation. The laser spectroscopic techniques were employed to characterize the dispersion state; i.e., raman fluorescence and absorption spectroscopic techniques. Raman spectroscopy has been used to probe the dispersion and aggregation state of SWNTs in solution. Individually suspended SWNTs show increased fluorescence peaks and decreased roping peaks at a raman shift 267 $cm^{-1}$ compared with the samples containing bundles of SWNTs. The ultraviolet-visible-near infrared (UV-vis-NIR) absorption spectrum of decanted supernatant samples show sharp van Hove singularity peaks

• Bulletin of the Korean Chemical Society
• /
• 제34권1호
• /
• pp.128-132
• /
• 2013

L-Arginine semi-oxalate (LASO) single crystal has been grown by solution growth technique at room temperature. The crystal structure and lattice parameters were determined for the grown crystal by single crystal X-ray diffraction studies. Photoluminescence studies confirm the violet fluorescence emission peak at 395 nm. Optical constants like band gap, refractive index, reflectance, extinction coefficient and electric susceptibility were determined from UV-VIS-NIR spectrum. The dielectric constant, dielectric loss and ac conductivity of the compound were calculated at different temperatures and frequencies to analyze the electrical properties. The solid state parameters such as plasma energy, Penn gap, Fermi energy and polarizability were calculated to analyze second harmonic generation (SHG). Nonlinear optical property was discussed to confirm the SHG efficiency of the grown crystal.

• 한국재료학회:학술대회논문집
• /
• 한국재료학회 2009년도 춘계학술발표대회
• /
• pp.53.1-53.1
• /
• 2009

실리콘 다층박막 태양전지를 위한 초고효율 실리콘 양자점 박막을 연구하기 위해 Silicon target과 Carbon target을 동시에 스퍼터하여 Silicon Carbide 박막을 증착하였다. Silicon Carbide 박막의 조성비는 target에 인가되는 RF Power를 조절하여 Auger Electro Spectroscopy를 사용하여 Si, C, O, N원소의 양을 정량화하여 측정하였다. Si Power를 200W에 고정하고, C Power를 0W에서 400W까지 변화시킬 때, $Si_{1-x}$ $C_x$ 박막에서 조성비 x는 0 ~ 0.43 범위였다. 이 박막을 증착 한 후에 질소 분위기에서 600 ~ $1000^{\circ}C$ 온도로 열처리를 진행하였다. High resolution TEM과 Raman 분석을 통해, 박막의 열처리 후 $Si_{1-x}$ $C_x$ 박막 내에 실리콘 양자점이 형성되었음을 관찰할 수 있었고, 2 ~ 10 nm 의 크기를 가지는 것으로 확인할 수 있었다. 이 실리콘 양자점을 포함한 $Si_{1-x}$ $C_x$ 박막을 적층하여 UV-VIS-NIR spectroscopy, FTIR및 PL와 같은 측정을 통해 광학적 에너지 밴드갭의 변화와 그에 따른 특성을 확인하였다.

• 대한치과기공학회지
• /
• 제35권4호
• /
• pp.281-286
• /
• 2013

Purpose: Surface modification is important techniques in modern dental and orthopedic implants. This study was performed to try embedding of bioactive materials in porous Ti implants. Methods: Porous Ti implant samples were fabricated by sintering of spherical Ti powders in a high vacuum furnace. It's diameter and height were 4mm and 20mm. Embedding process was used to suction and vacuum chamber. Loading properties of porous Ti implants were evaluated by scanning electron microscope(SEM), confocal laser scanning microscope(CLSM), and UV-Vis-NIR spectrophotometer. Results: Internal pore structure was formed fully open pore. Average pore size and porosity were $10.253{\mu}m$ and 17.506%. Conclusion: Porous Ti implant was fabricated successfully by sintering method. Particles are necking strongly each other and others portions were vacancy. This porous structure can be embedded to bioactive materials. Therefore bioactive materials will be able to embedding to porous Ti implants. Bioactive materials embedding in the porous Ti implant will induced new bone faster.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2013년도 제45회 하계 정기학술대회 초록집
• /
• pp.286.2-286.2
• /
• 2013

기존의 이온성 고분자-금속 복합체(IPMC)는 백금(Pt)전극을 이온성 전기활성 고분자(Ionic electroactive polymer)인 나피온에 무전해 도금으로 만들어졌다. 본 연구는 백금전극을 그래핀으로 대체하여 투명 이온성 고분자-그래핀 복합체(IPGC)를 제작하였다. 그래핀은 근적외선 화학기상증착법(NIR-CVD)으로 전이금속 (Cu, Ni) 위에 탄화수소 가스(CH4)를 이용하여 성장하였다. 전이 금속위에 성장된 그래핀을 나피온 양쪽면에 van der Waals 결합력을 이용하는 습식 전이공정으로 전극을 형성하였다. IPGC는 면 저항(4-point probe), 투과도(UV/Vis spectrometer) 및 라만 분광법(Micro Raman spectroscopy)의 측정으로 그래핀 전극의 특성평가를 하였고, 전계방사 주사전자현미경(Field Emisson Scanning Electron Microscope; FE-SEM)을 사용하여 IPGC의 구조적 특성을 확인하였다. 제작된 IPGC의 성능은 백금전극을 이용한 IPMC의 변위(displacement), 힘(force), 작동 주파수(Operating frequency) 분석을 통해 비교 평가하였다.

• 한국산학기술학회:학술대회논문집
• /
• 한국산학기술학회 2001년도 추계산학기술 심포지엄 및 학술대회 발표논문집
• /
• pp.153-156
• /
• 2001

광전자 기술의 발전 및 광 응용 분야의 확대에 따라 광전송치의 개발이 필수적이다. 이에 본 연구에서는 보다 넓은 영역의 광을 투과시키고, UV/VIS/NIR의 파장 영역에서 낮은 광 손실을 갖는 fiber를 제조하기 위하여 SiO₂,PbO를 주성분으로 하고 K₂O, Na₂O, B₂O₃등의 산화물을 적량 배합함으로써 core/clad유리의 제조 및 제조된 유리의 물성을 측정하였다. Core/clad의 match를 고려하여 최적조성을 선정하였으며, 이중도가니법을 이용하여 fiber를 제조하였다. 또한, 제조된 fiber의 구조적 특성을 관찰하였으며, 성형시 조건에 따라 50-200㎛의 직경을 갖는 fiber를 제조할 수 있었다. Fiber의 optical loss는 0.3-1.8㎛에서 측정하였다.

• Transactions on Electrical and Electronic Materials
• /
• 제13권2호
• /
• pp.102-105
• /
• 2012

The structural, electrical, and optical properties of layer-by-layer ZnO nanoparticles deposited using sol-gel spin coating technique were studied and now presented. Thicknesses of the thin films were varied by increasing the number of deposited layers. As part of our characterization process, XRD and FE-SEM were used to characterize the structural properties, current-voltage measurements for the electrical properties, and UV-Vis spectra and photoluminescence spectra for the optical properties of the ZnO thin films. ZnO thin films with thicknesses ranging from 14.2 nm to 62.7 nm were used in this work. Film with thickness of 42.7 nm gave the lowest resistivity among all, $1.39{\times}10^{-2}{\Omega}{\cdot}cm$. Photoluminescence spectra showed two peaks which were in the UV emission centered at 380 nm, and visible emission centered at 590 nm. Optical transmittance spectra of the samples indicated that all films were transparent (>88%) in the visible-NIR range. The optical band gap energy was estimated to be 3.21~3.26 eV, with band gap increased with the thin film thickness.

• 방사성폐기물학회지
• /
• 제5권2호
• /
• pp.103-108
• /
• 2007

질산, 불산 및 과염소산을 사용하여 플루토늄 옥사이드 $(PuO_2)$을 녹여 Pu 기준용액을 제조한후 UV-Visible-Near IR 분광기를 이용하여 Pu 흡수 스펙트럼 특성을 관찰하였다. 산성, 중성 및 알칼리 매질에서 Pu(III), Pu(IV) 및 Pu(VI)에 대한 분광학적 특성을 조사하였다. 또한 알칼리 및 산 농도 증가에 따른 Pu(VI) 흡수 스펙트럼에 대한 특성 피크 세기 및 위치를 관찰하였다. 염산 및 수산화나트륨 매질에서 환원제 첨가에 따른 Pu(VI) 산화수 변화를 측정하였다.