• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.28 no.3
• /
• pp.91-108
• /
• 2002

Whitening agents are eagerly demanded especially by oriental women who often suffers from the pigmentary disorders such as melasma and solar lentigines. As these pigmentary disorders are exacerbated by ultraviolet (UV), the whitening agents could exert its effect not only by inhibiting melanin synthesis but also by inhibiting UV activated signals. Eumelanin protects UV-induced DNA damages so that the chemicals which could reduce UV-induced DNA damages might be the ideal lightening agents. The effect of newly synthesized antioxidants, a-tocopheryl ferulate, on protective effect for UV-induced DNA damages as well as inhibiting melanin synthesis are briefly shown. For clinical evaluation, our results of the efficacy of lightening agents on treating pigment macules in combination with chemical peeling are shown. Furthermore, newly developed facial image analyzers to quantitatively evaluate the improvement of pigment macules are introduced.

• Journal of Conservation Science
• /
• v.21
• /
• pp.41-48
• /
• 2007

The resistance for atmospheric corrosion of the conventional 5 epoxy resins (Araldite rapid, Araldite AW 106, Araldite SV 427, Devcon, and CDK), those were used to restoration of the iron relics, were investigated in this study. Temperature, UV light, and water were chosen for the factors of the atmospheric corrosion. The drastic voluminous changes of the epoxy resins were found at the temperature range between $40^{\circ}C$ and $70^{\circ}C$ After UV exposure, the colors of the epoxy resins were severely changed. In case of the indoor exposure the chroma value(${\Delta}E$) of the resins were less than 2, which showed a little changes of the colors. The result of the water contact angle test was Araldite rapid>AW 106>Devcon>SV 427>CDK. Although the contact angles of the resins were reduced by UV exposure, SV 427 was stable comparatively.

• Journal of Korea Foresty Energy
• /
• v.19 no.1
• /
• pp.1-6
• /
• 2000

This study was carried out to investigate the growth responses of Pinus densiflora seedlings to enhanced UV-B environment for 16 weeks in the field condition. The seedlings were treated with one of three levels of UV-B dosages - ambient UV-B, ambient + 3.2, and ambient + 5.2 KJ m$^{-2}$day$^{-1}$ and the irradiation was performed at the stage before the germination, the fully expanded cotyledon, and the primary needles grown more than 0.8cm in length of the seedlings, respectively. Enhanced UV-B irradiation reduced the height and the root collar diameter growth, and dry mass production of the seedling, and T/R ratio was increased by the UV-B treatment. Difference in seedling growth was observed by difference in time of the UV-B treatment. Among the seedlings which were treated with ambient - 3.2 KJ m$^{-2}$day$^{-1}$, height and root collar diameter growth was relatively high in the seedling received the UV-B treatment at the stage before the germination. The lowest dry mass production was observed in the seedlings received the UV-B at stage of cotyledon both in two levels of enhanced UV-B treatment. Chlorophyll concentration was reduced by enhanced UV-B irradiation, and chlorophyll a/b ratio was increased by the UV-B treatment.

• Polymer(Korea)
• /
• v.36 no.6
• /
• pp.795-802
• /
• 2012

Surface modification of a hydrophobic acrylic polymer film has been performed through simple chemical treatment to give a reactive surface. 2-Triphenylstannylthioethyl acrylate was polymerized under UV-illumination with various contents of a comonomer. When the polymer film was treated with fluoride ion, thiol functional group (SH) was generated on the film surface, which was observed through infrared absorption spectroscopy. The surface was functionalized by thiol addition reaction to acrylic chromophores. The SH content on the surface was controlled with a comonomer, tris(hydroxymethyl)ethane triacrylate, and examined with UV-Vis absorbance of the chromophore attached film. Similarly, a polymer film from 2-tributylstannylthioethyl acrylate was prepared. Destannylation from the triphenylstannyl and tributylstannyl surface completed after 30 and 5 min, respectively. The SH-exposed surface was modified with an isocyanate attached chromophore within 10 min, while acrylic chromophore required 24 h.

• Korean Journal of Mineralogy and Petrology
• /
• v.33 no.4
• /
• pp.361-376
• /
• 2020

Atacamite and Verdigris were studied material scientific properties and durability that are used for traditional green pigment in traditional art painting work and Dancheong. As a result of ingrediant analysis, K-AA and K-VA identified Atacamite and Hoganite (or Verdigris) respectively. In order to find a factor of depressing the stability of pigment, we examined UV radiant exposure test, CO2/NO2 gas corrosion test and salt spray test. Salt spray test damaged both samples which were formed salt particle on the surface of the samples and it makes color disability. Furthermore, the results of gas corrosion test that both pigments change color enough to be perceived by the naked eyes showed that an air pollutant NO2 gas is also considered to be a major damage factor. In the case of K-VA, Hoganite that is main component of sample changes Tenorite with turn black after accelerated UV radiant exposure test. The consequences of the atmospheric environment effect test of the two pigments, K-VA showed relatetively weaker than K-AA.

• Journal of agriculture & life science
• /
• v.45 no.6
• /
• pp.115-124
• /
• 2011

This study was conducted to find a useful alternative herbivore system with which to study the effects of ultraviolet exposure on the pathogenicity and survival of Korean isolated entomopathogenic nematodes (Heterorhabditis sp. 202 strain, Heterorhabditis sp. Gyeongsan strain, Steinernema sp. 223 strain, S. carpocapsae Pocheon strain, S. glaseri Dongrae strain and S. longicaudum Nonsan strain). Pathogenicity of entomopathogenic nematodes against silkworm, Bombyx mori, differed depending on the nematode species and strain and instar of silkworm challenged. Steinernematidae were relatively more pathogenic to the 5th instar silkworms, whereas Heterorhabditidae were more pathogenic to the 1st instars. UV-C exposure was harmful to entomopathogenic nematodes. All nematodes were killed within 60 minutes of exposure of UV-C, and after 10 min of exposure they caused only 6.7% corrected mortality of silkworms. Silkworms were not infected when they were fed S. carpocapsae Pocheon strain treated mulberry leaves which were exposed to UV intensity of about $2.3mW/cm^2$ for 4 hours in the field. Pathogenicity of S. carpocapsae was not significantly reduced after 1 hour of exposure to $4.0mW/cm^2$ UV intensity on the mulberry leaves against silkworms.

• Proceedings of the Korean Society for Agricultural Machinery Conference
• /
• 2017.04a
• /
• pp.64-64
• /
• 2017

노지 고추 수확작업은 7~9월에 걸쳐 5~6회 수행되며 가장 더운 한 여름의 태양볕에 노출되어 장시간 수확작업을 하며 노지채소 및 고추 수확작업시 자외선 과다 노출되어 악성흑생종, 광선각화증, 편평세포 암 및 각종 피부암발생의 원인되기 때문에 적절한 해가림 장치의 설계가 필요하다. 해를 가려주는 장치에 사용되는 재질로는 우산 및 양산에 널리 사용되어지는 섬유로 폴리에스테르를 선정하였으며 두께로 우산의 재질로 많이 사용되는 75 denier을 채택하였다. 코팅의 종류로는 Foam, Milky, Silver, 폴리우레탄을 채택하여 섬유의 코팅 종류에 따른 차단 효과를 실험하였다. 실험 방법으로서는 KS K 0850 텍스타일의 자외선 차단율 및 차단지수 시험방법에 의거 하여 실험하였다. 자외선 UV-A(365n/m), UV-B(315n/m) 측정장치는 자외선 센서, UV램프, 인디케이터로 구성된 측정기를 이용하였으며 각 재료별 5회 반복 실시하여 평균치를 산출 하였다. UV-A(365n/m) 측정값으로는 FOAM, MILKY코팅이 된 섬유재질이 KS의 우산 및 양산품질표시기준에 부합하여 해가림 장치에 사용이 적절하였으며 UV-B(315n/m) 파장 차단율 측정값으로는 KS의 우산 및 양산품질표시기준에 모두 부합되었다. 또한 해가림 장치는 태양고도에 따라 각도를 조절 가능한 형태로 설계하였으며 직사광선이 가장 강한 시간대인 10시부터 12시를 기준하여 틸팅의 최대 각도는 20도로 개발하였다. 또한 바람에 의한 날림현상을 방지하고 통풍효과를 높이기 위해서 해가림 장치의 섬유를 2중 구조로 설계하여 바람의 순환이 되게하였다.

• Korean Journal of Optics and Photonics
• /
• v.16 no.2
• /
• pp.121-127
• /
• 2005

This paper presents the thermal characteristics of a Bragg grating recorded in photopolymer. We record hologram gratings using a 532 nm Nd : YAG laser in DuPont HRF 150-38 photopolymer films and analyze the diffraction efficiency versus thermal exposure conditions. For the case of recording after heating, the diffraction efficiency of the hologram is more than $70\%$ at $100^{\circ}C$ but is decreased exponentially at temperatures over $100^{\circ}C$. It is observed in the recording before heating that the diffraction efficiency of the hologram fixed by a UV light is increased to approximately $10\%$ at $100^{\circ}C$, but the holograms are erased at temperatures over $120^{\circ}C$.

• Analytical Science and Technology
• /
• v.27 no.5
• /
• pp.243-247
• /
• 2014

Formaldehyde is defined as carcinogen causing leukaemia, lymphoma or nasopharyngeal carcinoma at high level of exposure. Furniture-manufacturing workers can be exposed to formaldehyde, which implies serious impact on health of the workers. The authors carried out ambient monitoring of formaldehyde in the field, and identified the source of formaldehyde generated during the working process by testing the condition in the laboratory settings. After sampling formaldehyde in the air with 2,4-DNPH (2,4-dinitrophenylhydrazine) coated silica gel, we extracted formaldehyde derivative with acetonitrile and analyzed the extract using HPLC with UV detector at 360 nm. Formaldehyde was separated by ACQUITY UPLC BEH $C_{18}$ column at a flow rate of 0.5 mL/min using 45% acetonitrile as mobile phase. The workers were exposed to higher level of formaldehyde than normal air. Formaldehyde up to 0.31 ppm was detected in the process of veneer attachment, which exceeded 0.3 ppm, the ceiling value of ACGIH standard. The laboratory test of measuring formaldehyde generated from the glue and veneer used in the attachment process resulted in more formaldehyde generation as the temperature increased, and more from the veneer. Heating the veneer to $100-150^{\circ}C$ following the real condition of the manufacturing site generated 1.14-2.70 ppm of formaldehyde from the sample, which was 2-5 times higher level than Korean limit of exposure (0.5 ppm). As the workers handling and processing the veneer which was produced by wet process had high possibility to be exposed to formaldehyde, urgent improvement and management of working environment of furniture manufacturer is demanded.

• Journal of Korean Society of Environmental Engineers
• /
• v.34 no.1
• /
• pp.63-71
• /
• 2012

As nanotechnology is a key industry, there is growing concern relating to the potential risk of nanoparticles. They are known to be released into the environment via various exposure routes. When nanoparticles are present in water environments, they are supposed to be illuminated by ultraviolet light, and the ecotoxicity of photoactive nanoparticles may be changed. In this study, a review of the ecotoxicity of photoactive nanoparticles, including the mechanisms of phototoxicity, are presented. In order to address this issue, studies on the ecotoxicity to soil and water organisms exposed to photoactive nanoparticles were investigated. The photoactive nanoparticles chosen for this study were zinc oxide, titanium dioxide and fullerene. Microorganisms, nematode, earthworm, algae and fish, etc., were chosen to assess the toxicity of nanoparticles using diverse methods. However, studies on the phototoxicity potentially induced by nanoparticles on UV illumination have been reviewed in only 8 studies. From a few studies, photoactive nanoparticles have shown high dissolution rates under UV conditions, with the released ions observed to profoundly influence test organisms. In addition, NPs exposed to UV produced reactive oxygen species (ROS). These ROS can induce oxidative stress in exposed organisms. Evidence of phototoxicity by nanoparticles were found based on previous studies.