• Journal of the Korean Society of Clothing and Textiles
• /
• v.33 no.5
• /
• pp.817-826
• /
• 2009

As UV radiation to the earth increased over recent years, many adverse effects of UV radiation have been reported. There are needs to develop UV-protective apparel and accessaries to protect skin from these harmful effects. Cellulose is one of the most frequently worn fiber during summer time. However, celllulose shows very low UV-protective property especially in case of thin and low fabric content. In this study, UV-protective cellulose textiles were developed using chiotsan mordanting and green tea dyeing. The repetition effect of chitosan and green tea treatment were focused. Three different cellulose fibers, cotton, linen, and ramie, were used for this study. All chitosan mordanted and green tea dyed fabrics showed increases in UV-protective property. The color of fabrics tended to darker as the numbers of mordanting process and green tea dyeing increased. UV-protective property did not increase significantly upon the repetition of mordanting and green tea dyeing treatment except ramie fabric. UV protective property was persisted upon washfastness test in all three cellulose fiber types.

• Journal of the Korean Home Economics Association
• /
• v.45 no.10
• /
• pp.73-81
• /
• 2007

The purpose of this study was to increase the ultraviolet-light (UV)-cut ability of cellulose fabrics (cotton, ramie, and rayon) dyed with safflower yellow colorants. For this purpose, samples treated with UV-cut agent and tannic-acid were compared with the untreated samples after UV exposure in terms of K/S value, color changes(${\Delta}E$), SEM, and strength retention. The K/S value rapidly decreased after 28 days exposure, whereas the K/S value of the samples treated with both UV-cut agent and tannic-acid decreased to less than that of the untreated samples. In color changes, $L^*$ increased while $a^*$ and $b^*$ decreased, indicating less red and yellow character in color. This induced a change in the hue, value and chroma values. However the color change(${\Delta}E$) of the samples treated with both UV-cut agent and tannic-acid was less than that of the untreated samples. Scanning electron microscopy (SEM) pictures showed a severe degradation by exposure in all samples. Tensile strength rapidly decreased after 28 days for cotton and rayon, and after 21 days for ramie. However, the strength retention of the samples treated with UV-cut agent and tannic-acid was higher than that of the untreated samples.

• Journal of the Korean Home Economics Association
• /
• v.40 no.10
• /
• pp.77-85
• /
• 2002

This study was conducted to evaluate the efficiency of various fabrics in protecting from solar radiation and ultraviolet radiation(UV). Six kinds of fabrics were selected and examined in singles or doubles. It was studied how the materials and the thickness of air layer between the fabric and the floor affected the protection efficiency of fabrics from sunlight. The results were as followes; 1) Protection from solar radiation: In the case of over 2 cm air layer, doubled fabric composed of aluminum coating-nylon and white or black polyester/cotton(T/C) was the most protective(p<0.001). In the case of 0 cm air layer, the case without fabric and white T/C were more effective(p<0.001). And the thicker the air layer the more effective the protection. 2) Protection from UV : Doubled fabric composed of aluminum coating-nylon and black T/C was the most protective(p<0.001) and the thinner the air layer the more effective the protection(p<0.001).

• Journal of the Korean Applied Science and Technology
• /
• v.37 no.6
• /
• pp.1517-1527
• /
• 2020

This study is about the UV protection effect and water resistance of a multiple emulsion (W/O/W) sunblock cream applied with emotional engineering and reports an actual industrial case. Multiple emulsion system of sunblock cream has the characteristics of changing to a W/O type that is soft and moist when applied, and has excellent water resistance after absorption. Multiple emulsion cream is a highly functional sunblock cream that has both moisture and water resistance. It is a stable milky white cream with a viscosity of 36,000 cps. The organic sunscreen used for the sunscreen was ethylhexylmethoxycinnamate and bisethylhexyloxyphenolmethoxyphenyltriazine. Hexagonal zinc oxide and titanium dioxide that block both UVB and UVA were used. As a result of measuring the UV protection effect by the in-vitro method, the UV protection effect (SPF) is 78.9 for multiple emulsion cream, 76.7 for W/O cream, and 71.3 for O/W cream. It was found that the blocking effect was different. This obtained the highest effect value in the multiple emulsion. As a clinical (in-vivo) result of the UV protection effect, the SPF value representing the UV protection effect of the sunblock cream developed with a multiple emulsion system was 85.7, and the PA-value that blocks the UVA area was 26.5, and ++++. It was found that it has a corresponding high blocking effect. As a result of the water resistance test, the W/O/W formulation had a high waterproofing resistance of 93.8% even after 4 hours, W/O had 75.4%, and O/W had a low water resistance of 25.3%. In the results of the HUT test, it was found in the order of multiple emulsion sun block cream > hydrophilic cream > lipophilic cream. Based on the research results of this multiple emulsion, it is expected to be highly active as a sunblock cream dedicated to outdoor activities by improving the feeling of use, UV protection index, and water resistance. Therefore, in this study, a multiple emulsion system of sunblock cream is developed and has a characteristic that changes to a W/O type that has a soft and moist feeling when applied, and has excellent water resistance after absorption.

• Journal of Korean Ophthalmic Optics Society
• /
• v.17 no.1
• /
• pp.91-97
• /
• 2012

Purpose: This purpose of study is to investigate the effect of UV-A-blocking or brown-tinted ophthalmic lens against A2E photooxidation which known as one of the etiologies of AMD(Age-related macular degenaration). Methods: The photooxidation of A2E, synthetic product of two molecules of all-trans-retinal and ethanolamine, was induced by the exposure to blue light (420~470 nm, $94mW/cm^2$) for 3 minutes. The inhibitory effect of UVblocking or brown-tinted ophthalmic lens against A2E photooxidation was evaluated by UV absorbance and HPLC analysis of remained A2E after the exposure to blue light. Results: UV-blocking ophthalmic lens could not inhibit A2E photooxidation induced by blue light irradiation. There was no difference in A2E photooxidation in the presence of brown-tinted ophthalmic lens to block 15% of visible ray, however, those lenses blocking 55% or 86% of visible ray showed the inhibitory effect of A2E photooxidation as 9.98% and 16.55%, respectively. By HPLC analysis, the amount of residual A2E which was not blocked by any lens was $199.29{\pm}26.53{\mu}M$, however, the inhibitory effect against A2E photooxidation was shown in the presence of brown-tinted lens. The remained A2Es were $264.58{\pm}31.91{\mu}M$ and $402.93{\pm}28.68{\mu}M$ in brown-tinted lenses of 55% and 86% blocking visible ray, respectively. However, there was no inhibitory effect against A2E photooxidation in the case of UV-blocking lens by HPLC analysis. Conclusions: In this study, brown-tinted ophthalmic lens was confirmed to have the inhibitory effect against the photooxidation of A2E, a causing substance of AMD onset.

• Journal of the Korean Chemical Society
• /
• v.55 no.1
• /
• pp.98-103
• /
• 2011

This study was done for the preparation of macromolecular material with UV-blocking features by adding the benzophenone group that is commonly used as a UV-absorbent and $TiO_2$ which is known to be a very stable material in chemical and physical aspects. Also, we compared the level of UV absorbency of the polymer produced from polymerization with previous materials and measured basic properties such as water content, refractive index and optical transmittance of produced contact lenses. The results of the measurement showed that the refractive index and water content of the contact lens with added UV-absorbent was 1.430~1.440 and 35.0~45.0% respectively, which was similar to that of previous contact lenses. Also, for optical transmittances of each wave length, contact lenses without the UV-absorbent was 89%, 88% and 89% respectively for UV-A, UV-B and visible light, indicating that the UV transmittance is very high though contrary with cases of contact lenses with added 2-hydroxy-4-methoxy-benzophenone and 2,4-dihydroxy-benzophenone which showed transmittances of 0% and 6% respectively for UV-A and UV-B showing a UV-blocking effect. Meanwhile, contact lenses with added $TiO_2$ showed transmittance of 6% and 51% respectively for UV-A and UV-B also showing a UV-blocking effect. The visible transmittance was 77~89% showing that it satisfies the visible transmittance required for ophthalmological materials.

• Journal of Korean Ophthalmic Optics Society
• /
• v.6 no.2
• /
• pp.17-21
• /
• 2001

We analyzed the luminance in the visual light region and the size of pupil by the luminance to estimate an UV-A line cut efficiency in the lens. The size of pupil by the luminance(L) was given by ${\Phi}=d-e{\cdot}tanh(f{\cdot}logL)$ and the transmittance efficiency value of a size of pupil was given by $T_r(r)=1-gr^2+hr^4$. We derived the absolute cut efficiency value ${\alpha}$ and the exclusion index $b=(1-{\alpha}){\times}100%$ about the UV-A in the $320{\sim}400nm$ regions. The ${\alpha}$ and b values were obtained respectively 0.018, 0.31, 0.273, 0.153 and 98, 69, 72, 85% of Uv-cut Lens, CR-39, red color and blue color.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.5
• /
• pp.363-371
• /
• 2019

In this study, 340 Korean women were surveyed to analyze the impact of the type of sunscreen and use status on the satisfaction of products and resale. Studies have shown that indoor activity is higher than outdoor activity, and both simple and complex sunscreen is often used to compensate for skin tone. Out of single sunscreen, sun cream was used and air cushion was used a lot. Although product usability and UV protection indices were important factors in purchasing, 30% experienced side effects while product satisfaction and willingness to repurchase were high. The recognition of safety, Effectiveness, convenience, usability, satisfaction, and repurchase were all higher than that of composite UV-blocking products, and among subcomponents of product usage recognition, the level of convenience, efficacy, usability, and safety affected satisfaction and repurchase in order. Consequently, the perception of simple UV protection products was higher when using products for UV protection, and its convenience had a significant impact on satisfaction and resale.

• Journal of Korean Ophthalmic Optics Society
• /
• v.6 no.1
• /
• pp.101-105
• /
• 2001

It was measured the transmittance and the reflectance by tie dip method using the UV cut lens' UV solution. The half point and the edge wavelength of the transmittance were wry well applied to the eqution of a dip time dependence. $$W=W_0+A_1{e}{x}{p}[-(x-x_1)/t_1]$$ The half point wavelength of the transmittance shifted from 358 nm to 408 nm and the edge wavelength moved from 340 nm to 398 nm. The more dip time had long the less intensity of main reflectance peak-380 nm was small and shifted to long wavelength regions. And the component peak of UV solution began to show in dip time-10 min.

• 한국신재생에너지학회:학술대회논문집
• /
• 2011.11a
• /
• pp.175.2-175.2
• /
• 2011

바나듐 3, 4, 5가 이온은 공기 중에서 안정하지만, 바나듐 2가 이온은 쉽게 산화된다. 그러므로 바나듐 2가 이온이 담겨져 있는 음극 탱크가 공기와 접촉하지 않게 하는 것이 중요하다. 충전 중 음극 탱크에 공기가 침투되면, 바나듐 2가 이온은 3가 이온으로 산화되기 때문에 음극과 양극의 전해질에 불균형을 초래한다. 이러한 불균형은 바나듐 레독스 흐름전지 용량저하의 원인이 된다. 본 연구에서는 공기 중 2가 이온 산화에 의한 전해질의 불균형 현상을 쉽게 보여주기 위해, 공기노출과 차단조건에서 충방전 중에 발생한 음극과 양극의 바나듐 이온 상태변화량을 UV-Visible spectrophotometer를 이용해 정량적으로 분석하였다. 분석 결과, 공기노출 조건에서 음극의 충전 시, 충방전 cycle이 진행 될수록 바나듐 2가 이온의 양이 현격히 줄어들었지만, 공기차단 조건에서는 2가 이온의 양이 공기노출 조건보다 훨씬 더 적게 줄어들었다. 즉, 공기차단 조건에서는 바나듐 2가 이온이 3가로 산화되지 않아서 음극의 충전 후 바나듐 3가에서 2가로 전환되는 양이 공기노출 조건보다 더 많은 것을 확인할 수 있었다. 이러한 영향으로 인해, 충방전 10th cycle을 진행해 본 결과, 공기차단 조건에서는 충방전 용량감소가 거의 없었지만 공기노출 조건에서는 현격한 충방전 용량 감소를 보였다.