• Journal of Conservation Science
• /
• v.28 no.3
• /
• pp.229-233
• /
• 2012

This research was to evaluate conservational stability of cleaning treatment and color recovery by weak acid treatment on ivory. Before this experiment, had an ivory identification such as black light and schreger angle to find whether it is authentic or not. In wet cleaning treatment on ivory, used polar solvents such as distilled water, acetone, ethyl alcohol and acetic acid which usually used for cleaning ivory and bones. After cleaning took a experiment to evaluate conservational stability in surface observation, calculate weight and color difference. Following these results, these polar solvents were stable on the ivory samples. On the other hand, in weak acid treatment, used samples that were exposed by UV-A, UV-B, UV-C for 1 weeks, to restore its color from changed to original color. After treatment, found tiny cracks and exfoliation on the surface. Moreover, the color changed when it is treated by lemon juice, so, it is impossible to adapt.

• Journal of Environmental Science International
• /
• v.16 no.12
• /
• pp.1345-1353
• /
• 2007

The effect of salicylic acid(SA) on antioxidant system and protective mechanisms against UV-B induced oxidative stress was investigated in cucumber(Cucumis sativus L.) leaves. UV-B radiation and SA were applied separately or in combination to first leaves of cucumber seedlings, and dry matter accumulation, lipid peroxidation and activities of antioxidant enzymes were measured in both dose and time-dependant manner. UV-B exposure showed reduced levels of fresh weight and dry matter production, whereas SA treatment significantly increased them. SA noticeably recovered the UV-B induced inhibition of biomass production. UV-B stress also affected lipid peroxidation and antioxidant enzyme defense system. Malondialdehyde(MDA), a product of lipid peroxidation, was greatly increased under UV-B stress, showing a significant enhancement of a secondary metabolites, which may have antioxidative properties in cucumber leaves exposed to UV-B radiation. Combined application of UV-B and SA caused a moderate increase in lipid peroxidation. These results suggest that SA may mediate protection against oxidative stress. UV-B exposure significantly increased SOD, APX, and GR activity compared with untreated control plants. Those plants treated with 1.0 mM SA showed a similar pattern of changes in activities of antioxidant enzymes. SA-mediated induction of antioxidant enzyme activity may involve a protective accumulation of $H_2O_2$ against UV-B stress. Moreover, their activities were stimulated with a greater increase by UV-B+SA treatment. The UV-B+SA plants always presented higher values than UV-B and SA plants, considering the adverse effects of UV-B on the antioxidant cell system. ABA and JA, second messengers in signaling in response to stresses, showed similar mode of action in UV-B stress, supporting that they may be important in acquired stress tolerance. Based on these results, it can be suggested that SA may participates in the induction of protective mechanisms involved in tolerance to UV-B induced oxidative stress.

• Proceedings of the Membrane Society of Korea Conference
• /
• 2001.11a
• /
• pp.83-86
• /
• 2001

• Journal of the Korean Society of Clothing and Textiles
• /
• v.33 no.5
• /
• pp.817-826
• /
• 2009

As UV radiation to the earth increased over recent years, many adverse effects of UV radiation have been reported. There are needs to develop UV-protective apparel and accessaries to protect skin from these harmful effects. Cellulose is one of the most frequently worn fiber during summer time. However, celllulose shows very low UV-protective property especially in case of thin and low fabric content. In this study, UV-protective cellulose textiles were developed using chiotsan mordanting and green tea dyeing. The repetition effect of chitosan and green tea treatment were focused. Three different cellulose fibers, cotton, linen, and ramie, were used for this study. All chitosan mordanted and green tea dyed fabrics showed increases in UV-protective property. The color of fabrics tended to darker as the numbers of mordanting process and green tea dyeing increased. UV-protective property did not increase significantly upon the repetition of mordanting and green tea dyeing treatment except ramie fabric. UV protective property was persisted upon washfastness test in all three cellulose fiber types.

• Journal of Microbiology and Biotechnology
• /
• v.33 no.4
• /
• pp.419-429
• /
• 2023

Ultraviolet C (UV-C, 200-280 nm) light has germicidal properties that inactivate a wide range of pathogenic and spoilage microorganisms. UV-C has been extensively studied as an alternative to thermal decontamination of fruit juices. Recent studies suggest that the efficacy of UV-C irradiation in reducing microorganisms in fruit juices is greatly dependent on the characteristics of the target microorganisms, juice matrices, and parameters of the UV-C treatment procedure, such as equipment and processing. Based on evidence from recent studies, this review describes how the characteristics of target microorganisms (e.g., type of microorganism/strain, acid adaptation, physiological states, single/composite inoculum, spore, etc.) and fruit juice matrices (e.g., UV absorbance, UV transmittance, turbidity, soluble solid content, pH, color, etc.) affect the efficacy of UV-C. We also discuss the influences on UV-C treatment efficacy of parameters, including UV-C light source, reactor conditions (e.g., continuous/batch, size, thickness, volume, diameter, outer case, configuration/arrangement), pumping/flow system conditions (e.g., sample flow rate and pattern, sample residence time, number of cycles), homogenization conditions (e.g., continuous flow/recirculation, stirring, mixing), and cleaning capability of the reactor. The collective facts indicate the immense potential of UV-C irradiation in the fruit juice industry. Existing drawbacks need to be addressed in future studies before the technique is applicable at the industrial scale.

• The Journal of Korean Academy of Prosthodontics
• /
• v.37 no.3
• /
• pp.343-357
• /
• 1999

The color change of maxillofacial silicone has been attributed to certain environmental factors such as exposure to the UV component of natural sunlight, wetting and drying of the elastomer and surface abrasion resulting from the application and removal of cosmetics. The purpose of this study was to evaluate the color change of maxillofacial silicone (Silastic MDX4-4210) according to type of pigment (cadmium yellow, titanium white, cosmetic red), and UV absorber application method after 200, 400, and 600 hours of 350nm UV light irradiation. The results were as follows. 1. According to type of pigments, after 200 hours cosmetic red showed significantly larger color change than cadmium yellow and titanium white, and after 400 and 600 hours color change significantly decreased in the order of cosmetic red, cadmium yellow, and titanium white (p<0.05). 2. In the cadmium yellow group, after 200 hours, the non-treatment group showed significantly larger color change, but after 400 and 600 hours, color change significantly decreased in the order of non-treatment, surface application and mixed group (p<0.05). 3. In the titanium white group, there was no significant color change difference between the three groups after 200 and 400 hours, but after 600 hours, the mixed group showed significantly smalt or color change than the non-treatment and surface application groups (p<0.05). 4. In the cosmetic red group, there was significant decrease in color change in the order of non-treatment, surface application and mixed group (p<0.05). From the results above, the effect of UV light absorber differed according to the type of pigment, but mixing UV light absorber with maxillofacial silicone is thought to give superior resistance against UV light irradiation in the long run.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.41 no.11
• /
• pp.1632-1638
• /
• 2012

The effects of combined treatment of aqueous $ClO_2$ and UV-C or electron beam irradiation on microbial growth and quality in chicon during storage at $4^{\circ}C$ were investigated. Samples were treated separately with 50 ppm of $ClO_2$, 5 kJ/$m^2$ of UV-C, 2, 5, 7, and 10 kGy of electron beam irradiation, as well as a combination of $ClO_2$ and UV-C or 2 kGy of electron beam irradiation. The populations of total aerobic bacteria as well as yeast and molds in the chicon samples were determined following each treatment. The populations of total aerobic bacteria in the chicon samples decreased by 1.49~2.92 log CFU/g following combined treatment of $ClO_2$ and UV-C irradiation compared to the control, whereas the populations of yeast and molds decreased by 1.63~1.78 log CFU/g. On the contrary, following combined treatment of $ClO_2$ and electron beam irradiation, the populations of total aerobic bacteria as well as yeast and molds in the chicon samples were undetectable during storage. Color measurements indicated that Hunter $L^*$, $a^*$, and $b^*$ values were not significantly different among the treatments during storage. These results suggest that combined treatment of $ClO_2$ and electron beam irradiation can be useful for improving microbiological safety in chicon during storage.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.42 no.6
• /
• pp.1016-1024
• /
• 2018

Lifestyle of Health and Sustainability (LOHAS) influences the development of hygienic and health-oriented functional textile products; consequently, there has been an increase in the prospects for environmentally friendly natural dyeing products with functional and sensitive characteristics. Therefore, the present study expresses a functional manifestation on fabrics by treatment with chitosan and tannin using natural Coptidis Rhizoma. Cotton and wool fabrics dyed with Coptidis Rhizoma after treatment with chitosan and tannin. Consequently, the antibiosis of fabric dyed with Coptidis Rhizoma was excellent with 99.9% bacterial reduction for Staphylococcus aureus and Klebsiella pneumoniae in both fabrics. The deodorization rate was more than 90.0% in both fabrics after 120 minutes. The UV-A protection rate was 88.2% and the UV-B protection rate was 87.7% for cotton. The UV-A protection rate was 88.2% and the UV-B protection rate was 84.3% for wool fabric. Therefore, both of the dyed fabrics showed excellent UV protection by treatment with only chitosan and tannin, without mordants. Therefore, chitosan and tannin treatments were able to manifest functionalities in the fabrics dyed with Coptidis Rhizoma.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.31 no.2
• /
• pp.58-63
• /
• 1999

Three kinds of papers were prepared from different beating degree of pulps. Physical and optical properties were examined to elucidate the deterioration mechanism of paper according to beating degrees. Changes of double folds, elongation, water retention value, DP, K/S value and visible, UV region light absorption spectra of those papers treated by UV light were studied. Double folds and brightness were decreased more rapidly by UV treatment with increasing of beating degree. The light absorption rates of pulps in visible and UV region were also increased with change of beating level. The formation of new hydrogen bonds and higher light absorption rate of pulps according to beating induced to absorb and interact with much UV light. These phenomena maybe brought about to accelerate paper deteriortion by UV treatment both optical and physical properties.

• Textile Coloration and Finishing
• /
• v.20 no.4
• /
• pp.8-14
• /
• 2008

Flame-retardant cotton fabrics were prepared by UV curing of photocurable aqueous formulations of phosphorous-containing methacrylate monomers and 2-hydroxy-2-methyl-1-phenyl-1-propanone as flame retardants and a photoinitiator respectively, which is an environmentally friendly and energy-saving process. The characterization of the UV-coated cotton fabric was made by ATR, TGA and limited oxygen index measurement. UV cured coating onto cotton fabrics reduced the first thermal decomposition temperature and mass loss as well as increase in the amount of char residue compared with the untreated cotton fabric presumably due to modified thermal decomposition process. The LOI values up to 28.5 and 27.2 were obtained by the UV curing of MMEP and TMEP respectively. The treatment was durable to five laundering cycles, which was more prominent in the case of trifunctional TMEP treatment.