• Animal cells and systems
• /
• v.5 no.1
• /
• pp.77-83
• /
• 2001

The present study was conducted to elucidate whether the expression level of poly(ADP-ribose) polymerase (PARP) is related to the ultraviolet radiation (UV)-induced apoptosis. After treatment of the mammalian cell lines HeLa S3 and Chinese hamster ovary (CHO) with 50 J/m2 UV, induction of apoptosis was determined by several means during 24 h post-incubation. Incidence of apoptosis was much lower in CHO than HeLa S3 cells based on the percentage of apoptotic cells in terms of morphological changes in nucleus or direct counting of viable cells and qualitative or quantitative DNA fragmentation. Interestingly, when the expression level of PARP was measured by western blotting, the amounts of PARP that was retained at each time point inversely correlated with the incidences of apoptosis in these cells. Concomitant with generation of the 85 kDa fragment, 116 kDa PARP disappeared in HeLa S3 within 6 h after UV treatment, whereas a fair amounts of 116 kDa band was still retained in CHO cells at 36 h post-incubation. This inverse relationship was also observed in the adaptive response system, in which cells weve treated with a high dose of UV after pretreatment with a low dose. As expected, typical adaptive responses appeared in CHO cells but not in HeLa cells, showing greater cell viability and lesser DNA fragmentation. During the adaptive response in CHO cells, PARP was expressed at much higher level compared to the single, high dose-treated cells. Interestingly, even though PARP was induced at 6 h post-incubation In both cell types, its expression was more prominent in CHO cells. Thus, our data indicate that the retained level of intact PARP against UV damage inversely correlates with incidence of apoptosis in mammalian cells, and also suggest that a machinery to protect the PARP degradation against UV damage exists in CHO but not in HeLa S3 cells.

• Food Engineering Progress
• /
• v.13 no.2
• /
• pp.122-129
• /
• 2009

Ultraviolet (UV) is widely used as a sterilizing agent in restaurants and catering facilities in Korea. Efficacy of UV sterilizers (UVS) was investigated against E. coli on the inner bottom of stainless steel cups. UV intensity on the bottom of cups varied widely with the locations of cups in UVS, showing higher values at center while lower values at outskirts. The deviations in UV intensity were remarkable on top shelf, but alleviated as proceeded to middle and bottom shelves. Inactivation of E. coli was proportional to the UV intensity and treatment time, consequently to UV dose, and showed a pseudo-first-order kinetics with tailing. Initial inactivation rate constants ($K_{1}$) deviated with the locations of the cups, while final inactivation rate constants ($K_{2}$) showed comparable values. An equation for the calculation of the proposed UV treatment time was suggested.

• Journal of Ginseng Research
• /
• v.46 no.5
• /
• pp.646-656
• /
• 2022

Background: In addition to its use as a health food, ginseng is used in cosmetics and shampoo because of its extensive health benefits. The ginsenoside, Rh2, is a component of ginseng that inhibits tumor cell proliferation and differentiation, promotes insulin secretion, improves insulin sensitivity, and shows antioxidant effects. Methods: The effects of Rh2 on cell survival, extracellular matrix (ECM) protein expression, and cell differentiation were examined. The antioxidant effects of Rh2 in UV-irradiated normal human dermal fibroblast (NHDF) cells were also examined. The effects of Rh2 on mitochondrial function, morphology, and mitophagy were investigated in UV-irradiated NHDF cells. Results: Rh2 treatment promoted the proliferation of NHDF cells. Additionally, Rh2 increased the expression levels of ECM proteins and growth-associated immediate-early genes in ultraviolet (UV)-irradiated NHDF cells. Rh2 also affected antioxidant protein expression and increased total antioxidant capacity. Furthermore, treatment with Rh2 ameliorated the changes in mitochondrial morphology, induced the recovery of mitochondrial function, and inhibited the initiation of mitophagy in UV-irradiated NHDF cells. Conclusion: Rh2 inhibits mitophagy and reinstates mitochondrial ATP production and membrane potential in NHDF cells damaged by UV exposure, leading to the recovery of ECM, cell proliferation, and antioxidant capacity.

• BMB Reports
• /
• v.31 no.4
• /
• pp.405-408
• /
• 1998

Endonuclease-sensitive sites detected by T4 endonuclease V or UvrABC nuclease treatments were compared in the dihydrofolate reductase gene of UV-irradiated Chinese hamster ovary B-11 cells. The number of endonuclease-sensitive sites detected by T4 endonuclease V treatment followed by NaOH denaturation was twice that of formamide denaturation. Repeated treatment of damaged genomic DNA with T4 endonuclease V resulted in no further increase in the number of endonuclease-sensitive sites detected. The numbers of endonuclease-sensitive sites detected by UvrABC nuclease using each denaturation condition were similar. Sequential treatment with the two endonucleases using formamide denaturation resulted in twice the number of endonuclease-sensitive sites detected by treatment of each nuclease alone. Due to a lack of AP endonuclease activity these results suggest the presence of T4 endonuclease V-sensitive sites which could be complemented by alkaline gel separation or by UvrABC nuclease treatment.

• KSBB Journal
• /
• v.27 no.1
• /
• pp.16-20
• /
• 2012

In this study, novel nano silver sand filtration method was compared with UV treatment and normal sand filtration method through filtering treated water from sewage treatment plant. As a result, $BOD_5$ removal rate of nano silver sand filtration showed higher approximately 31% and 23%, comparing with UV treatment and sand filtration. Moreover, $KMnO_4$ removal rate of nano silver sand was about 6.6 and 2.8 times higher than other two methods. In addition, it showed better for removing SS and total coliform, comparing with others. Also, there is no bacteria on nano silver sand after experiments. Therefore, nano silver sand filtration will be effective for advanced water treatment.

• Journal of Life Science
• /
• v.31 no.5
• /
• pp.481-487
• /
• 2021

The purpose of this study was to identify fungi that degrade product value during the storage and distribution of confectionery products, and to investigate the antifungal effect of organic acid and UV-C treatments on high carbohydrate products. Fungi isolated from spoiled high carbohydrate confectionery were identified as Wallemia sp., Aspergillus sp-1 and Aspergillus sp-2 depending on homologies with ITS1 and ITS4 sequences. The isolated fungi were assayed for antifungal activity by treatment with acetic acid, citric acid, lactic acid or maleic acid. As a result, it was confirmed that the growth of Wallemia sp. and Aspergillus sp-2 was suppressed by treatment with 0.2 M and 0.35 M acetic acid, respectively. In addition, as a result of confirming the antifungal effect according to the UV-C irradiation time, the growth inhibitory effects of Wallemia sp. and Aspergillus sp-2 were shown in irradiation for 30 min and the growth inhibitory effect of Aspergillus sp-1 was shown in irradiation for 40 min. The result of the sensory evaluation of the untreated and 0.35 M acetic acid-treated high carbohydrate confectionery, there were not significant changes in taste, color, abnormal taste, hardness and texture, but there were significant differences in sour taste and smell. As a result of the above study, the effect of inhibiting fungi growth on the product by treatment with organic acid and UV-C irradiation was confirmed, and it is expected to be used in confectionery that were concerned about the occurrence of fungi in the distribution process.

• Journal of Advanced Marine Engineering and Technology
• /
• v.35 no.5
• /
• pp.675-681
• /
• 2011

In this paper, we dealt with the design and fabrication of a medium pressure ultra-violet (UV) lamp and a magnetic ballast which are main components for ballast water treatment systems (BWTS). To acquire an optimal discharge condition of UV lamp, electrical and optical characteristics depending on the argon gas volume and the amount of mercury were experimentally analyzed. Rated voltage, current and power consumption of a prototype lamp were 490 [V], 8.6 [A] and 4.0 [kW], respectively. UV intensity of the lamp was 15 [%] higher than that of an equivalent lamp which is used in a BWTS. The magnetic ballast was designed in a UI core type through theoretical analysis and simulation. The open voltage and the rated power consumption of the ballast were 920 [V] and 8.5 [kVA] respectively. The disinfection efficacy which is carried out in a BWTS equipped with the UV lamp and magnetic ballast was over 99.99 [%], and this satisfy the IMO regulations.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2013.08a
• /
• pp.214.2-214.2
• /
• 2013

Device performance for the 45 and 32 nm node CMOS technology requires the integration of ultralow-k materials. To lower the dielectric constant for PECVD and spin-on materials, partial replacement of the solid network with air (k=1.01) appears to be more intuitive and direct option. This can be achieved introducting of second "labile" phase during depositoin that is removed during a subsequent UV curing and annealing step. Besides, with shrinking line dimensions the resistivity of barrier films cannot meet the International Technology Roadmap for Semiconductors (ITRS) requirements. To solve this issue self-forming diffusion barriers have drawn attention for great potential technique in meeting all ITRS requirments. In this present work, we report a Cu-V alloy as a materials for the self-forming barrier process. And we investigated diffusion barrier properties of self-formed layer on low-k dielectrics with or without UV curing treatment. Cu alloy films were directly deposited onto low-k dielectrics by co-sputtering, followed by annealing at various temperatures. X-ray diffraction revealed Cu (111), Cu (200) and Cu (220) peaks for both of Cu alloys. The self-formed layers were investigated by transmission electron microscopy. In order to compare barrier properties between V-based interlayer on low-k dielectric with UV curing and interlayer on low-k dielectric without UV curing, thermal stability was measured with various heat treatment temperature. X-ray photoelectron spectroscopy analysis showed that chemical compositions of self-formed layer. The compositions of the V based self-formed barriers after annealing were strongly dominated by the O concentration in the dielectric layers.

• Korean Journal of Food Science and Technology
• /
• v.49 no.1
• /
• pp.90-96
• /
• 2017

The aim of this study was to investigate the anti-inflammatory and ultraviolet (UV)-protective effect of Pleurotus eryngii extract (PEE) in activated RAW 264.7 cells and UV-induced mouse skin damage. The results showed that PEE strongly inhibited the production of inflammatory mediators such as nitric oxide, interleukin $(IL)-1{\beta}$, and IL-6 at high concentrations in LPS-stimulated RAW 264.7 macrophages. In addition, PEE treatment suppressed erythema, melanin index, and epidermal thickness to a greater degree than ascorbic acid (AA) treatment in UV-irradiated mice. Finally, PEE treatment inhibited the infiltration of mast cell to a similar degree of AA treatment. Therefore, these results indicate that PEE could improve inflammation and skin damage in immune cells and UV-irradiated mice. This study may provide positive insights into PEE as a functional food and cosmetic ingredient for treatment of inflammation and skin damage.

• Journal of the Korean Wood Science and Technology
• /
• v.36 no.6
• /
• pp.33-40
• /
• 2008

Normally, cedar heartwood has a red color. However, it frequently changes black color (blackening phenomenon). It is reported that blackening phenomenon of cedar has been caused by oxidation of phenolics and norlignan extractives under weak alkaline conditions. In this study, heat treatment and UV irradiation were carried out to reduce the difference of color value between blackened wood and bright sap wood. Effects of temperature, moisture content, treatment time and light on decrease of color difference between blackened heartwood and sapwood were evaluated in each treatment. A decrement of different color value between blackened heartwood and bright sapwood by hot-water treatment was bigger than others. An effect of the vacuum drying was similar to that of the kiln drying. UV irradiation decreases the color difference between dried blackened heartwood and bright sapwood. It is suggested that UV irradiation could be used as final treatment to reduce the color difference on wood during drying process. Determination of optimum conditions and development of hybrid process for control of discoloration will be needed in a further study.