• 한국소음진동공학회논문집
• /
• 제22권11호
• /
• pp.1099-1105
• /
• 2012

Transparent noise barrier panels have the advantages of transmitting light to nearby residents and allowing drivers to orientate themselves by providing views of the surrounding area. To develop guidelines on quality criteria for transparent soundproof panels, their sound transmission loss and weatherability were experimentally investigated. In Korea, the sound transmission loss of noise barrier panels should be more than 25 dB at 500 Hz and 30 dB at 1000 Hz. The transmission loss tests of transparent panels were performed in accordance with KS F 2808. Typically, plastic materials suffer from color changes when exposed to ultraviolet(UV) light over extended periods. Therefore, weathering of plastics is one of the most important properties for outdoor applications. Protection against UV radiation and weathering is usually accomplished by using UV stabilizer additives or coatings. Transparent materials for soundproof panels were examined through accelerated weathering tests and their weathering resistances were evaluated from changes in yellowness index.

• 방사선산업학회지
• /
• 제7권1호
• /
• pp.23-28
• /
• 2013

In this study, we fabricated high density polyethylene (HDPE) composites filled with antioxidants and UV stabilizers. The electron beam irradiation on the fabricated composites was carried out over a range of absorbed doses from 50 to 200 kGy to confirm the changes of discoloration. The changes of discoloration were characterized using a color difference meter and FT-IR for confirming the changes of the color difference and structural change. It was observed that the color difference of IRGANOX 1010-, IRGAFOS 168-, and TINUVIN 328- added HDPE was higher than that of the control HDPE by electron beam irradiation. The melting temperature of UV stabilizer-added HDPE was not significantly changed by electron beam irradiation. However, the melting temperature of phenol-containing antioxidant-added HDPE was increased with increasing the absorbed dose. And the melting temperature of phosphorus-containing antioxidant-added composite was decreased with increasing the absorbed dose.

• 폴리머
• /
• 제25권5호
• /
• pp.625-634
• /
• 2001

액상 이소프렌 고무에 무수 말레간(MAH)을 그라프팅시킨 후 2,2,6,6-tetramethyl-4-piperidinol (TMPO)를 반응시켜 hindered amine light stabilizer (HALS)가 함유된 새로운 고분자형 광안정제를 합성하고, SBR에 대한 광안정제로서의 특성을 관찰하였다. 새로운 고분자형 광안정제의 조성과 물리적 성질은 적정법, GPC 그리고 열중량 분석에 의하여 분석하였다. SBR의 광산화 반응에 대한 고분자형 광안정제의 효과를 254nm 자외선 조사에 따른 자외선 흡광도의 변화, 관능기 변화 그리고 잔막율로서 관찰한 결과, 새로운 고분자형 광안정제를 첨가함으로써 광산화 반응이 효과적으로 억제되었다. 또한, 고부자형 광안정제의 추출내성은 저분자량의 모델 화합물에 비하여 훨씬 우수하였으며, 고분자형 광안정제와 SBR의 상용성은 TMPO가 SBR 필름 표면에 균일하게 고루 분산되어 있어서 매우 우수하였다.

• Bulletin of the Korean Chemical Society
• /
• 제33권12호
• /
• pp.3987-3992
• /
• 2012

Silver nanopowders were prepared from silver 2-ethylhexylcarbamate (Ag-EHCB) complexes by simple thermal reduction at $85^{\circ}C$ without any reducing agent in organic solvent. 2-Ethylhexylammonium 2-ethylhexylcarbamate (EHAEHC) was investigated in terms of their abilities to stabilize the silver nanoparticles (Ag-NPs) and its subsequent effects on the preventing aggregation between Ag-NPs. Conditions (concentration of stabilizer and reaction time) used to reduce Ag-EHCB complex were systematically varied to determine their effects on the sizes of Ag-NPs. The formation of the stabilized Ag-NPs were easily monitored by UV-vis spectroscopy and characterized by TGA, TEM, SEM and XRD. When EHAEHC was used as a stabilizer, Ag-NPs of 10-30 nm in diameter were easily obtained in high yield. Silver patterns were obtained from a silver nano-paste by heat treatment at $200^{\circ}C$ in air and were found to have resistivity values of $2.9{\times}10^{-8}\;{\Omega}{\cdot}m$.

• 보존과학회지
• /
• 제33권3호
• /
• pp.203-214
• /
• 2017

본 연구에서는 야외 플라스틱 작품에 많이 사용되고 있는 유리섬유강화플라스틱(FRP)을 대상으로 자외선에 의한 색도 및 광택도, 접촉각 변화, 적외선 분광분석을 통해 열화 특성을 확인하였으며, FRP의 열화를 예방하고자 자외선 차단 코팅제를 제조하여 코팅제의 성능 평가를 진행하였다. 자외선 열화 결과, FRP의 표면변화는 기공 이외에 다른 변화는 관찰되지 않았다. 색차는 열화 초기에 급격히 증가하였는데 이는 적외선 분광분석 결과와도 유사하였다. 광택도 및 접촉각의 경우 뚜렷한 변화는 확인되지 않았다. 코팅제 처리에 따른 특정한 표면 변화는 관찰되지 않았으나 색차 비교 결과, 미처리 시편보다 색 변화가 낮게 측정되어 변색 제어가 가능함을 확인하였다. 코팅제 도포 후 열화에 따른 광택도 및 접촉각 변화가 일부 관찰되었으나 자외선 차단 코팅제는 상대적으로 안정한 것으로 나타났다. 적외선 분광분석 결과, 화학적 변화가 미미함에 따라 코팅제가 일정 기간 동안 열화를 지연시키는 것으로 보인다. 본 연구를 통해 작품 재료로써 FRP의 자외선 열화 양상을 파악하였으며, 제조한 자외선 차단 코팅제의 성능 평가를 통해 야외 FRP 작품의 보존 방안으로써 적용 가능성을 확인하였다.

• 한국복합재료학회:학술대회논문집
• /
• 한국복합재료학회 2005년도 추계학술발표대회 논문집
• /
• pp.91-94
• /
• 2005

Polypropylene as a matrix has been used for wood polymer composites(WPC). In preparing WPC, the coupling agent, Polypropylene grafted Maleic Anhydride(PP-G-MA) was used in order to obtain a good interfacial bonding force between matrix and fillers and dispersion of wood powders. In this study, the effects of wood powder contents and water absorption on the mechanical properties were experimentally investigated. The tensile strength and flexural strength of composites reached its peak value when the wood powder content was around 60 wt%. However, the peak value of the impact was observed about 30 wt% of wood powder content. The tensile strength and flexural strength increase with increasing the wood power contents. But the impact strength decrease with increasing the wood powder contents. The slight change was observed with the water absorption in the WPC. The optimal condition of the compositions such as Anti-oxidant and UV stabilizers for the outdoor application was suggested in this research.

• 한국신뢰성학회지:신뢰성응용연구
• /
• 제7권4호
• /
• pp.173-181
• /
• 2007

Out door exposure to daylight and weather climate conditions can cause adverse effect on the properties of automotive plastic materials. The effects of sunlight exposure, especially ultra violet (UV) radiation, can break down the chemical bonds in a polymeric material. This degradation process is called photo-degradation and ultimately leads to color changes, cracking, chalking, the loss of physical properties and deterioration of other properties. To explore the effect of sunlight exposure on the automotive materials, this study investigated photo-oxidation degree and surface property change of molding parts by analytical methods. For the further study, accelerated weathering test methods are proposed, which can correlate with out door weathering, to predict long term performance of automotive plastic materials.

• 한국재료학회:학술대회논문집
• /
• 한국재료학회 2003년도 춘계학술발표강연 및 논문개요집
• /
• pp.111-111
• /
• 2003

반도체 나노결정은 양자구속효과(quantum confinement effect)에 의한 광학적인 특성을 갖기 때문에 광전자공학(optoelectronic), 광전지(photovoltaic)분야에 응용하려는 연구가 활발히 진행되고 있다. 본 연구에서는 고순도의 CdTe 나노결정을 1-thioglycerol 표면 완화제(surface stabilizer)로 사용하여 수용액 상태로 합성하였다. 모든 실험은 $N_2$ 분위기의 삼각플라스크에서 실험하였다. Cadmium 소오스로는 Cd(CIO$_4$)$_2$.6$H_2O$(Cadmium perchlorate hydrate-Aldrich)를 사용하였고 Tellurium 소오스로는 A1$_2$Te$_3$(Aluminum telluride-CERAC)와 H$_2$SO$_4$가 반응하여 H$_2$Te gas가 주입되도록 하였다. 합성된 CdTe 나노결정은 core-shell 형태로 존재하며 결정크기에 따른 특성분석을 위해서 High Resolution Transmission Electron Microscope (HRTEM), Photoluminescence spectroscopy, X-ray diffraction(XRD), UV-vis absorption spectra 분석을 하였다 또한 CdTe 나노결정을 나노와이어로 제작하여 CdTe 나노결정을 이용한 태양전지 제작에 응용하고자 한다.

• 유변학
• /
• 제10권4호
• /
• pp.256-258
• /
• 1998

선형저밀도폴리에틸렌(LLDPE)의 필름 제조시 가공성 및 필름의 투명성을 개선하기 위한 실험을 하였다. LLDPE에 전자선을 조사하여 분자구조를 변형시켜줌으로써 가공 특성 및 광학적 특성이 향상된 필름을 얻을 수 있었다. 전자선 조사량의 세기를 조절하여 일정량만 조사하고 자외선 안정제를 소량 처방하면 필름 가공시 젤이 생기지 않았고 투명성 및 가공성이 개선되었다.

• 한국염색가공학회지
• /
• 제9권6호
• /
• pp.79-86
• /
• 1997

The microcapsule for thermochromism is based on the polymerization reaction between epoxy resin and amine curing agent. The preparation process of microcapsule is based on dissolving or dispersing a hydrophobic core materials[one-dye-black(OBD), bis-phenol A(BPA), cetyl alcohol] in an aqueous solution of gelatin, epoxy resin and isophorondiamine(IPDA) ; the gelatin and IPDA used as a dispersion stabilizer and an hardening agent, respectively. The structures of epoxy resin and microcapsule materials have been analyzed by FT-IR and UV/Vis spectra. The mean diameter and size distribution of microcapsule are 1.46~1.75${\mu}{\textrm}{m}$ and 1.42, respectively. The DSC thermograms of microcapsules indicated 2 kinds of endothermic peaks at 47 and 322$^{\circ}C$. This is possibly corresponding to the melting peak of core material and wall meterial. These microcapsules are applied to the fabric by printing. Complex finished fabric showed a good wear resistance on rubbing test and the print pattern to the cotton fabric showed a reversible thermochromism ; ${\mu}_{max}$ are 580 nm below 4$0^{\circ}C$ and 276.5nm above 4$0^{\circ}C$ in ethanol/water(2/8), respectively.