• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2006년도 추계학술대회 논문집
• /
• pp.173-174
• /
• 2006

• Korean Chemical Engineering Research
• /
• 제45권5호
• /
• pp.493-499
• /
• 2007

본 연구에서는 UV photo-lithography 방식의 particle replication in non-wetting templates(PRINT) 법을 이용하여 약물 전달에 운반체로 사용되는 $3{\mu}m{\times}3{\mu}m{\times}2{\mu}m$ 사이즈의 균일한 고분자 하이드로젤 입자를 제조하였다. 몰드(mold)와 기재(substrate)는 PRINT 방식을 통하여 탄성을 지닌 perfluoropolyethers(PFPE)로 제작하였으며 이를 반복적으로 사용할 수 있도록 하였다. 제작된 입자는 점착성이 있는 수용성 고분자를 이용하여 회수하였다. 입자의 주요 성분은 생분해성 고분자인 poly(ethylene glycol) diacrylate(PEG-diA)이며, 세포 uptake에 적합하도록 aminoethylacrylate(AEM)와 2-acryloxyethyltrimethyl ammonium chloride(AETMAC)를 첨가하였다. 본 연구를 통해 균일하고 원하는 크기의 생체분해성 고분자 입자를 제작하는 PRINT 기술이 약물 전달 및 유전자 전달에 필요한 수송체인 비바이럴 벡터를 제작하기 위한 효과적인 기술임을 제시하였다.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2005년도 춘계학술대회 논문집
• /
• pp.1493-1496
• /
• 2005

In this paper, we describe a simple, precise and low cost method of fabricating PDMS stamp for UV embossing. It is important to improve the replication quality of stamp because the accuracy of fabricated structure is related to that of the stamp in UV embossing. The PDMS stamp has been fabricated by the replica molding technology with ultrasonic vibration to eliminate micro-air bubbles during the fabrication process of PDMS stamp. Also, this fabrication to use ultrasonic vibration promotes PDMS solution to fill into micro channel and edge parts. We report the fabrication of an optical core using UV embossing with fabricated PDMS stamp. This fabricated core is $7\;\mu{m}\;at\;depth,\;6\;\mu{m}\;at\;width.\;This\;measured\;value\;has\;the\;difference\;below\;1\;\mu{m}$compared to the original stamp. The surface roughness of core is about 14 nm root mean square. This is satisfactory value to use low-loss optical waveguide. Our successful demonstration of precise replica technology presents an alternative approach for the stamp of UV embossing.

• 소성∙가공
• /
• 제14권5호
• /
• pp.473-476
• /
• 2005

The demand of on-chip total analyzing system with MEMS (micro electro mechanical system) bio/chemical sensor is rapidly increasing. In on-chip total analyzing system, to detect the bio/chemical products with submicron feature size, a filtration system with nano-filter is required. One of the conventional methods to fabricate nano-filter is to use direct patterning or RIE (reactive ion etching). However, those procedures are very costly and are not suitable fur mass production. In this study, we suggested new fabrication method for a nano-filter based on replication process, which is simple and low cost process. After the Si master was fabricated by laser interference lithography and reactive ion etching process, the polymeric mold was replicated by UV-imprint process. Metallic nano-filter was fabricated after removing the polymeric part of metal deposited polymeric mold. Finally, our fabrication method was applied to metallic nano-filter with $1{\mu}m$ pitch size and $0.4{\mu}m$ hole size for bacteria sensor application.

• 대한화장품학회:학술대회논문집
• /
• 대한화장품학회 2003년도 IFSCC Conference Proceeding Book II
• /
• pp.405-406
• /
• 2003

DNA is known as the genetic material in cells. Various environmental factors can cause DNA damages. One of them is sunlight. The life on earth depends on the sunlight, but on the other hand, the UV light in sunlight can cause skin DNA damages. When these damages are not fully repaired before replication, they can lead to mutations of oncogenes and tumour suppressor gene and result in photo carcinogenesis, in the end, skin cancer.(omitted)

• BMB Reports
• /
• 제34권6호
• /
• pp.489-495
• /
• 2001

DNA damage by UV and environmental agents are the major cause of genomic instability that needs to be repaired, otherwise it give rise to cancer. Accordingly, mammalian cells operate several DNA repair pathways that are not only responsible for identifying various types of DNA damage but also involved in removing DNA damage. In mammals, nucleotide excision repair (NER) machinery is responsible for most, if not all, of the bulky adducts caused by UV and chemical agents. Although most of the proteins involved in NER pathway have been identified, only recently have we begun to gain some insight into the mechanism by which proteins recognize damaged DNA. Binding of Xeroderma pigmentosum group C protein (XPC)-hHR23B complex to damaged DNA is the initial damage recognition step in NER, which leads to the recruitment of XPA and RPA to form a damage recognition complex. Formation of damage recognition complex not only stabilizes low affinity binding of XPA to the damaged DNA, but also induces structural distortion, both of which are likely necessary for the recruitment of TFIIH and two structure-specific endonucleases for dual incision.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2012년도 제43회 하계 정기 학술대회 초록집
• /
• pp.247-247
• /
• 2012

Plasmon subwavelength nanostructures enable the structurally modulated color due to the resonance conditions for the specific wavelength range of light with the nanoscale hole arrays on a metal layer. While the unique properties offered from a single layer of metal may open up the potential applications of integrated devices to displays and sensors, fabrication requirements in nanoscale, typically on the order of or smaller than the wavelength of light in a corresponding medium can limit the cost-effective implementation of the plasmonic nanostructures. Simpler nanoscale replication technologies based on the soft lithography or roll-to-roll nanoimprinting can introduce economically feasible manufacturing process for these devices. Such replication requires an optimal design of a master template to produce a stamp that can be applied for a roll-to-roll nanoimprinting. In this paper, a master mold with subwavelength nanostructures is fabricated and optimized using focused ion beam for the applications to nanoimprinting process. Au thin film layer is deposited by sputtering on a glass that serves as a dielectric substrate. Focused ion beam milling (FIB, JEOL JIB-4601F) is used to fabricate surface plasmon subwavelength nanostructures made of periodic hole arrays. The light spectrum of the fabricated nanostructures is characterized by using UV-Vis-NIR spectrophotometer (Agilent, Cary 5000) and the surface morphology is measured by using atomic force microscope (AFM, Park System XE-100) and scanning electron microscope (SEM, JEOL JSM-7100F). Relationship between the parameters of the hole arrays and the corresponding spectral characteristics and their potential applications are also discussed.

• 생명과학회지
• /
• 제12권2호
• /
• pp.219-225
• /
• 2002

진핵세포의 염색체는 전사, 복제, 회복 등의 과정에서 관여하는 단백질의 기능으로 구조가 변하게 된다. 이때 관여하는 단백질은 DNA-단백질의 상호작용에 의해서 이루어지게 되는데, 이때 단백질의 일부분은 일정한 상동성이 존재하게 된다. 이러한 부분은 motif나 domain으로 구성되는데, 예를 들면, SAP domain등을 들 수 있다. S. pombe genomic DNA 데이터베이스를 검색하여 Arabidopsis PARP 과 KU70과 상동성을 보이는 새로운 유전자를 찾았다. 이를 SAPuvs (SAP UV Sensitive)라 명명하였으며, Ura4를 선별표지로 이용하여 S. pombe SAPuvs 유전자 결실세포를 구성하였다. SAPuvs 유전자 결실세포는 자외선 조사 실험에서 정상의 세포에 비해 현저하게 죽었다. 그러나, MMS 또는 MMS와 3AB의 처리 실험에서는 저항성을 보였다. 이러한 결과로 SAPuvs는 DNA 상해회복에서 염색사구조 형성에 연관되어 있음을 확인하였다.

• The Plant Pathology Journal
• /
• 제28권1호
• /
• pp.75-80
• /
• 2012

$Potato$ $virus$ $X$ (PVX) contains $cis$-acting elements including stem-loop 1 (SL1) RNA at the 5' region; SL1 is conserved among all potexviruses. The SL1 at the positive-sense RNA, SL1(+), is required for PVX RNA replication, cell-to-cell movement, and translation. Previous research demonstrated that SL1(+) RNA also serves as the origin of assembly for encapsidation of PVX RNA. To identify the essential sequences and/or regions for capsid protein (CP) subunit recognition within SL1(+) RNA, we used electrophoretic mobility shift assays (EMSA), UV cross-linking, and yeast three-hybrid analyses. The EMSA and UV cross-linking analyses with PVX CP subunits and RNA transcripts corresponding to the SL1(+) RNA showed that the SL1(+) RNA formed complexes with CP subunits. We also conducted EMSA and yeast three-hybrid analyses with RNAs containing various mutations of SL1(+) RNA elements. These analyses indicated that SL1(+) RNA is required for the interaction with PVX CP and that the RNA sequences located at the loop C and tetra loop of the SL1(+) are crucial for CP binding. These results indicate that, in addition to being important for RNA accumulation, the SL1(+) RNA from the 5' region of the PVX genome is also required for specific binding of PVX CP.

• Journal of Microbiology
• /
• 제40권1호
• /
• pp.11-19
• /
• 2002

Mice immunized with equine herpesvirus type-1(EHV-1) L-particles skewed a significant increase (p<7.75) in serum antibody titers. Upon a booster dose four weeks lateral antibody titers increased significantly. Interestingly, immunization via intravenous or intramuscular route induced significantly higher (p<0.75) antibody titers. However, mice iummunized with UV-treated L-particles, visions or immunization via intranasal route induced lower antibody titers. Upon challenge inoculation with wildtype EHV-1, our data showed there was a poor correlation between antibody titers and protection against virus replication. Therefore, the role of cell-mediated immunity Inwards protection was investigated. As predicted, the strongest cell-mediated immunity, as measured by delayed-hypersensitivity test, was detected in mice immunized with live virus particles. The magnitude of cell-mediated immune response correlated with the efficacy of L-particles as immunizing agent. The highest efficacy, as indicated in mice immunized via intranasal routed was highly correlated with cell-mediated immunity. A similar phenomenon was also demonstrated in mice immunized intranasally with UV-treated L-particles. However, the degree of protection was reduced when mice immunized intravenously or intramuscularly with UV-treated L-particles. In conclusion, protection conferred in these animals was highly implicated by immune cells and the least by antibodies. The route of immunization and the nature of the antigen also contributed to the efficacy of L-particles as immunizing agent. In contrast to that of herpes simplex virus type 1, our data showed EHV-1 non-infectious L-particles are highly suitable for immunization of the host against EHV-1 disease.