• Journal of the Korean Applied Science and Technology
• /
• v.26 no.2
• /
• pp.171-178
• /
• 2009

A comparative analysis of the hindered amine light stabilizers (HALS) and UV abosrber (UVA) and their respective photostabilizing effect on wood plastic composites (WPCs) are reported in this study. The influence of accelerated weathering on the mechanical properties of the composites and the microscopic morphology of a degraded layer on the cross section and the surface were studied. UV absorbers were more efficient at preventing composite lightening than was UV stabilizer. The amount of whitening decreased with the increase of photostabilizers. With the addition of a UV absorber (Tinuvin360), the tensile modulus and strength of the composites increased slightly. However, the addition of a light stabilizer (Tinuvin770) and a UV absorber decreased the tensile modulus and strength of the composites. After 250 and 500 hr exposure, tensile modulus and strength of the un stabilized and stabilized composites decreased. The tensile strength of UV absorber (Chimassorb81)-stabilized composites was significantly greater than that of control and light stabilizer (Tinuvin770)- and UV absorber (Tinuvin360)-stabilized composites. UV absorber-stabilized samples showed less whitening and photodegradation than control and light stabilizer-stabilized samples.

• Journal of the Korean Wood Science and Technology
• /
• v.24 no.4
• /
• pp.47-55
• /
• 1996

UV transmission spectra of water-soluble acrylic resin films containing hydroxybenzophenolic, hydroxyphenylbenzotriazolic UV absorber and HALS(hindered amine light stabilizer) were investigated by exposure time(before exposure weathered for 160 and 320hours) in QUV Weather-Ometer. Also the YID(yellowness index difference), LID(lightness index difference) and CD(color difference) of dried water-soluble acrylic resin films and the coated woods of Larix leptolepis were analyzed by addition level of UV absorber(0, 1, 2 and 3%) and HALS(0, 0.5, 1 and 1.5%) and by exposure time in QUV Weather-Ometer. They showed no significant effects on UV transmission spectra of dried water-soluble acrylic resin films in the range of 300 to 400nm irrespective of exposure time. However, UV transmission decreased as increase of exposure time. UV transmission spectra were lower in dried water-soluble acrylic resin films containing hydroxybenzophenolic UV absorber and HALS than in these containing hydroxyphenylbenzotriazolic UV absorber and HALS in the range of 350 to 400nm. The least YID, LID and CD in the coated woods of Larix leptolepis appeared at the addition level of 3%, based on non-volatile content, in hydroxybenzophenolic and hydroxyphenylbenzotriazolic UV absorber, and of 1.5% in HALS to water-soluble acrylic resin.

• The Journal of Korean Academy of Prosthodontics
• /
• v.37 no.3
• /
• pp.343-357
• /
• 1999

The color change of maxillofacial silicone has been attributed to certain environmental factors such as exposure to the UV component of natural sunlight, wetting and drying of the elastomer and surface abrasion resulting from the application and removal of cosmetics. The purpose of this study was to evaluate the color change of maxillofacial silicone (Silastic MDX4-4210) according to type of pigment (cadmium yellow, titanium white, cosmetic red), and UV absorber application method after 200, 400, and 600 hours of 350nm UV light irradiation. The results were as follows. 1. According to type of pigments, after 200 hours cosmetic red showed significantly larger color change than cadmium yellow and titanium white, and after 400 and 600 hours color change significantly decreased in the order of cosmetic red, cadmium yellow, and titanium white (p<0.05). 2. In the cadmium yellow group, after 200 hours, the non-treatment group showed significantly larger color change, but after 400 and 600 hours, color change significantly decreased in the order of non-treatment, surface application and mixed group (p<0.05). 3. In the titanium white group, there was no significant color change difference between the three groups after 200 and 400 hours, but after 600 hours, the mixed group showed significantly smalt or color change than the non-treatment and surface application groups (p<0.05). 4. In the cosmetic red group, there was significant decrease in color change in the order of non-treatment, surface application and mixed group (p<0.05). From the results above, the effect of UV light absorber differed according to the type of pigment, but mixing UV light absorber with maxillofacial silicone is thought to give superior resistance against UV light irradiation in the long run.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.7 no.6
• /
• pp.1296-1301
• /
• 2006

The human eye is exposed to UV and visible light. UV light exposure becomes harmful to the eye. Protection for eyes should block all ultraviolet rays. In our study, organic-inorganic hybrid materials have been applied to UV blocking coatings with UV absorbing materials on transparent plastics. The optical properties of UV blocking coatings were investigated in PMMA, CR 39 and PC substrates. In case of all UV absorbers, the transmission of UV light decreases with an increased amount of absorber. Our findings indicate that PMMA significantly reduced the transmission of UV radiation, CR 39 showed moderate decrease, while UV-uncoated PC had some UV blocking properties. Adhesion, hot water resistance and chemical resistance of the UV-coated CR 39 lenses were good. Pencil hardness were 4H. Abrasion resistance were poor.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.25 no.5
• /
• pp.925-932
• /
• 2001

The influence of ultraviolet(UV)-ray in sun light on human skin has been noted. Textiles can provide protection against harmful UV-radiation. Normally UV-absorbing finishes are used to get better protection. The purpose of this study is to evaluate the UV-cut properties of cotton fabrics treated with UV-absorber. 2,2-dihydroxy-4,4-dimethoxbenzophenone, as UV-absorber was applied to 100% cotton fabric. Reagents added in finishing solution were Triton X-100, polyethylene glycol 400, and $MgCl_2{\cdot}6H_2O$, and C.I. Direct Red 81. Both untreated and treated cotton fabrics were exposed to a xenon arc lamp for 20 and 80 hours. UV absorption spectra of finishing solutions and UV transmission spectra of fabrics were measured by the UV/VIS spectrophotometer. The results of this study can be summarized as follows. The results of this study can be summarized as follows. Absorption and the related transmission spectra were modified in a controlled way with UV-absorber. Absorption effect of UV-absorber was improved by adding Triton X-100, PEG 400, and $MgCl_2{\cdot}6H_2O$ in finishing solution. The UV absorption of finishing solution was in the following order: U/D/T/P/M>D/T/P/M> D/T> D/P, D>U/T/P/M>U/T>T/P/M>T. The UV transmittance of cotton fabrics was remarkably decreased by the application of UV-absorber and additives. The UV-cut properties were most improved by the application of U/D/T/P/M.

• Proceedings of the Korean Society of Dyers and Finishers Conference
• /
• 2011.03a
• /
• pp.33-33
• /
• 2011

삶의 질 향상에 따른 의류 및 산업소재의 발전이 가속화되고 있는 현재 상황에 Benzotriazol 또는 Benzophenone계열의 UV-absorber들은 수많은 종류들이 개발되고 사용되고 있는 실정이지만 UV-A와 UV-B 영역을 전반적으로 protecting하고 염색 후 내열성이 떨어지고 및 색상변이(일광견뢰도 저하)를 가져오는 한계가 있다. 이에 Bezotriazine 계열의 새로운 UV-absorber에 대한 필요성에 의하여 amide와 chloride화합물에 의해 oxazinone을 합성 할 수 있었고 이를 amidine 화합물과 축합하여 S-Triazine을 고 순도로 합성 할 수 있었다. 이 화합물을 섬유 염색 시 적용이 가능토록 formulation화하여 당사에서 생산 판매되는 자동차용삼원색에 적용하여 염색하였고 현재 한국 및 유럽의 자동차 maker의 일광견뢰도 실험 방법에 따라 test한 결과 우수한 일광견뢰도를 갖는 것을 확인 할 수 있었다.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.12
• /
• pp.10-15
• /
• 2020

Ultraviolet rays, which have wavelengths smaller than 400 nm, are very harmful to the eyes. Recently, high-energy visible light was also revealed to be harmful to retinal cells. Therefore, polymer eyeglass lenses that can block UV and high-energy visible light are needed for eye health. In this study, high-refractive-index polymer eyeglass lens, n=1.67, were manufactured using the injection-mold method with the m-xylene diisocyanate monomer, 2,3-bis((2-mercaptoethyl)thio)-1-propanethiol monomer, benzotriazole UV absorber, release of alkyl phosphoric ester, dye mixture of CI solvent violet 13, and catalyst of dibutyltin dichloride mixture. A multi-layer anti-reflection coating was applied to manufactured polymer eyeglass lenses for both sides using an E-beam evaporation system. The optical properties of the manufactured lenses with the UV and high-energy visible light-blocking function were analyzed by UV-visible spectrophotometry. As a result, the polymer eyeglass lens with a UV absorber of 0.5 wt. % blocked 99% of UV and high-energy visible light shorter than 411 nm. The average transmittance of the polymer eyeglass lens with a UV absorber of 0.5wt.% was 97.9% in the range of 460 ~ 660 nm for photopic eye sensitivity higher than 10%. Therefore, clear image acquisition in photopic vision is possible.

• Fashion & Textile Research Journal
• /
• v.21 no.2
• /
• pp.231-236
• /
• 2019

This study investigated the proper dyeing conditions, color fastness and functionality of wool fabrics dyed with Zizania latifolia Turcz. We also tried to improve light fastness through treatment with benzophenone ultraviolet absorber. The dyeing of wool fabrics using Zizania latifolia Turcz was good even without pretreatment or mordanting treatment. Optimal wool fabric dyeing conditions were colorant concentration of 200% (o.w.f.), dyeing temperature of $100^{\circ}C$, dyeing time of 80 minutes and a dye bath pH of 3. Color fastness of dyed wool fabrics to washing, rubbing, perspiration and light was 4-5, 5, 4-4-5 (acidic), 4-5 (alkaline) and 2 respectively. The results after treatment with ultraviolet absorber for improving the fastness of daylight were improved to 3-4 grade. The UV protection rate were increased after dyeing and the deodorization of ammonia gas improved to 98%. Bacterial reduction rate (Staphylococcus aureus) of wool fabrics was excellent at 99.9%. All dye fastness (except for light fastness) was excellent; in addition, the functionality of wool fabrics dyed with Zizania latifolia Turcz also improved. The results are expected to be applied to various fields because they indicate excellent results after treatment with ultraviolet absorber for improving the fastness of daylight.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.26 no.1
• /
• pp.41-58
• /
• 2000

Recently the harmfulness of W radiation is in creasing due to encironmental pollution. Environmental population may also play a role in global decrease of ozone layer, A major consequence of ozone depletion is increase in solar ultra violet radiation received at the earth's surface excessive exposure to W radiation cause a lot of problems in our skin. Plant extract that possess antioxidative activities has been reported to retard the oxidation process in product to which they have been added. Plant are alived under solar light. So it is expect the plants have so many protection mechanisms and UV absorbent ingredients against ultra violet radiation such as UVB, UVA. Plant extract which were flavonoids, alkaloids and others could be transformed into UV absorber by chemical modification. Therefore with the aim of finding alternative natural absorber that can safely be used in cosmetic, we have screened various extract for their UV absorbent effect. Thus, the cosmetic safety against human skin, antimicrobial effects and others could be improved by using the silicon.

• 대한치과보철학회:학술대회논문집
• /
• 1999.04a
• /
• pp.97-97
• /
• 1999