• Journal of Photoscience
• /
• v.9 no.2
• /
• pp.466-469
• /
• 2002

An experiment has been conducted to measure the impact of UV radiation sensitivity on dermatophytes (Microsporum boullardii) by different UV radiation exposure time interval (1 min, 2 min 5 min, 10 min and 20 min) in degradation of keratin (Feather) in growth promoting substances of protein, cysteine, cystine and methionine from 7 to 28 days of incubation period. Mutant strain caused maximum weight loss with 1 minutes of UV radiation exposure at 21 day and mutant strain became immune in sensitivity at 14 days for decomposition of feathers. Maximum protein caused at 21st days with 20 minutes U.V radiation exposure and immune sensitivity had deducted with other UV radiation exposure time. On 28 days, mutant strains became immune with all exposure times, Whereas maximum methionine caused at 21st days with 20 minutes UV radiation exposure. Maximum cysteine caused at $14^{th}$ day with 5 minutes UV radiation exposure and mutant strain showed immune response at all time periods. Cystine production was also followed by cysteine at 21 day and also showed complete immune response with 1 and 2 minutes UV radiation exposure at7 and 14 days. Thus mutant strain of Microspornm boullardii can be used as a biotechnological tool for production of growth promoting substances.

• Applied Chemistry for Engineering
• /
• v.20 no.5
• /
• pp.511-516
• /
• 2009

Photodegradation characteristics of polyolefin composites were studied. Thermogravimetric analysis results suggest that the polyolefin blends used in this study have different amounts of talc. The mechanical behaviors of polyolefin blends, which experienced UV-irradiation in accordance with SAE J1960, are investigated using tensile and Izod impact tests. These results show that as the UV-exposure time increases, a significant drop in the elongation at break and impact strength at a low temperature are observed. This may be explained by the decreases in elastic energy derived from the scission of polymer molecular chains and the low density of entanglement after UV- photodegradation. Scanning electron microscopy observations indicate that no crack and surface damage are observed, while the additional talc particles are exposed, on the UV-exposed surfaces. The exposure of talc particles may be responsible for the discoloration of UV-exposed polyolefin blend surface. Observation using Fourier transform infrared spectroscopy (FT-IR) confirms the presence of photodegradation on the surface of UV-exposed polyolefin blend.

• Journal of the Korean Society for Precision Engineering
• /
• v.34 no.1
• /
• pp.65-72
• /
• 2017

The goal of this paper is to investigate the effects of out-of-plane deposition angle on product characteristics of a UV photo-curing process. Specimens are manufactured from a commercialized UV photo-curing machine, the NOBEL V1.0. The influence of the out-of-plane deposition angle of the specimen on surface characteristics, including morphology of the sloped surface, pick-to-pick distance of convex region, and roughness of the sloped surface, is examined via the observation of the sloped surface. In addition, the influence of the radius of curvature of the specimen on the surface roughness of the sloped surface is evaluated. The effects of the out-of-plane deposition angle on impact strength of specimens are investigated via Izod impact experiments. Finally, we discuss the influence of the out-of-plane deposition angle on failure characteristics of specimens for impact loads.

• Clean Technology
• /
• v.16 no.4
• /
• pp.245-253
• /
• 2010

Optimum conditions for UV-radiated photopolymerization of unsaturated polyester that could be used as protecting layer of large diameter pipe were investigated in this paper. UV photopolymerization method was selected to solve the problems, arising when thermal polymerization by organic peroxide was used, such as the instability of peroxide initiator, the evolution of volatile organic compound, and thermal deformation of product. Two of the photo-initiators (Irgacure 819 and Darocure 1173) well known for its penetrating ability deep into the polymer layer were selected, and the optimum conditions for photopolymerization (1.5 phr initiator content, 1:1.2 initiator ratio, Ga lamp for UV source) were found from the thermal and mechanical test results of the resultant UP polymers. In addition, composite materials containing UP polymer and glass fiber were tested for hardness, impact strength, and flexural strength to find that the impact strength of composite significantly improved.

• Environmental Sciences Bulletin of The Korean Environmental Sciences Society
• /
• v.3 no.3
• /
• pp.197-201
• /
• 1999

The growth of two phytoplanktons was studied in a natural environment and in the laboratory under artificial radiation conditions in the presence or absence of UV radiation. The effect of an elevated temperature on the two phytoplanktons was also examined. UV radiation resulted in a decrease in the growth of the two phytoplanktons ; P. micans was more affected by UV than S. costatum. Four hours of UV radiation decreased the motility of S. costatum and P. micans by 20% and 40%, respectively. Accordingly, an elevated temperature and UV radiation decreased the growth rate of the two phytoplanktons investigated.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2001.05c
• /
• pp.106-109
• /
• 2001

In this paper, we have investigated the degradation of shed materials of outdoor insulators by UV-radiation by using corona-charging and XPS analysis. The accumulated charges on polymeric surface having intrinsic hydrophobic property have a negative impact on retaining its hydrophobicity. Therefore, shorter decay times of surface charges are preferred. The surface voltage decay on UV-treated silicone rubber and EPDM show a different decay trend with UV treated time. From the XPS analysis, the oxidized groups of silica-like structure in silicone rubber increase with UV treatment time. For EPDM, the oxidized carbon groups of C=O, O=C-O increase as elapse of UV radiation time. These oxidized surface for each material have different electrostatic characteristics, so deposited charges may be expected to have different impacts on their surface hydrophobicity. The degradation mechanism based on our results is discussed.

• Journal of IKEEE
• /
• v.17 no.4
• /
• pp.531-536
• /
• 2013

The impact of UV irradiation process on the AlGaN/GaN metal-oxide-semiconductor heterostructure field-effect transistor was investigated. Due to the high intensity UV irradiation before the gate dielectric deposition, the conductivity of AlGaN/GaN structure and the drain saturation current of the transistor increased by about 10 %. However, the pinch off characteristics of transistor was severely deformed by the process. By comparing the electrical characteristics of the transistors, it was proposed that the high intensity UV irradiation formed a sub-channel under the two dimensional electron gas of AlGaN/GaN structure even without additional impurity injection.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.9 no.3
• /
• pp.56-61
• /
• 2010

Recently, UV pulse laser is widely used in micro machining of the research, development and industry field of IT, NT and BT products because the laser short wavelength provides not only micro drilling, micro cutting and micro grooving which has a very fine line width, but also high absorption coefficient which allows a lot of type of materials to be machined more easily. To analyze the dynamic deformation during a very short processing time, which is nearly about several tens nanoseconds, the commercial Finite Element Analysis (FEA) code, LS-DYNA 3D, was employed for the computitional simulation of the UV laser micro machining behavior for thin copper material in this paper. A finite element model considering high strain rate effect is especially suggested to investigate the micro phenomena which are only dominated by mechanically pressure impact in disregard of thermally heat transfer. From these computational results, some of dynamic deformation behaviors such as dent deformation shapes, strains and stresses distributions were observed and compared with previous experimental works. These will help us to understand micro interaction between UV laser beam and material.

• Journal of the Korean Graphic Arts Communication Society
• /
• v.25 no.1
• /
• pp.95-107
• /
• 2007

This study starts to find a way out, experiment and apply commercial UV coatings to the cap closures. The cap closures is made form coating and succeeding deformation process. It is coated with several printing layers, printing and over print varnish coating. Then it pressed in three steps of press called 'deep-drawing'. In this study, two kinds of coating was designed and accomplished in the base of the same manufacturing and environment conditions. Consequently, UV curable ink have adequate performance in this experiment (T-bending, Erichsen Test), but it were experienced several damages in this experiments (web-bending, impact test). They were not cured enough to endure the friction and a unique shape of serial cracks were appeared.

• Journal of Environmental Health Sciences
• /
• v.33 no.5
• /
• pp.441-450
• /
• 2007

본 연구는 humic acid 및 bromide를 함유한 상수 원수에 오존 처리를 수행함에 있어 수질 특성 및 공정조건에 따른 bromate 및 formaldehyde 의 생성을 고찰하였다 . 회분식 실험장치를 이용하여 오존의 주입농도, DOC 농도, bromide 농도, pH, 알칼리도 및 반응 시간을 변화시키면서 오존처리 시 생성되는 대표적인 부산물인 bromate 및 formaldehyde의 거동을 파악하였다. 본 연구에서 검토된 영향 인자 중 수중의 pH조건은 bromate 및 formaldehyde의 생성에 가장 중요한 인자로 나타났다. DOC(dissolved organic carbon) 농도가 증가할수록 bromate 생성은 감소하였고 formaldehyde 의 생성은 증가하였다. 오존처리를 통해 UV254 는 효율적으로 감소되었고, UV254의 감소율 및 오존 농도는 선형 관계를 나타냈다.