• Molecular & Cellular Toxicology
• /
• v.3 no.1
• /
• pp.23-30
• /
• 2007

The effects of high energy short wave solar radiation on human skin have received much publicity as the major cause of accelerated skin ageing and of skin cancers. To meet public demand, the cosmetic industry has developed sun protection factor products, which contain a variety of so-called "UV filters", among others benzophenone (BP) and its metabolites are the widely used UV filters. UV filters are also used to prevent UV light from damaging scents and colors in a variety of cosmetics products and to protect of plastic products against light-induced degradation. There are many variants of BP in use. In this respect, to regulate and to evaluate the hazardous effect of BP-type UV filters will be important to environment and human health. The genotoxicity of 7 BP-type UV filters was evaluated in L5178Y $(tk^{+/-})$ mouse lymphoma cells in vitro. BP, benzhydrol, 4-hydroxybenzophenone 2-hydroxy-4-methoxybenzophenone and 2, 4-dihydroxybenzophenone did not induce significant mutation frequencies both in the presence and absence of metabolic activation system. 2, 2'-Dihydroxy-4-methoxybenzophenone appeared the positive results at the highest dose, i.e. 120.4 ${\mu}g/mL$ only in the absence of metabolic activation system. And also, 2, 3, 4-trihydroxybenzophenone revealed a significant increase of mutation frequencies in the range of 138.1-207.2 ${\mu}g/mL$ in the absence of metabolic activation system and 118.3-354.8 ${\mu}g/mL$ in the presence of metabolic activation system. Through the results of MLA with 7 BP-type UV filters in L5178Y cells in vitro, we may provide the important clues on the genotoxic potentials of these BP-type UV filters.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.29 no.6
• /
• pp.276-282
• /
• 2019

The purpose of this study was to analyze the structure of general filter using ultrafine filter (Profilter), dust collector filter, HEPA (HAPA-High Efficiency Particulate Air) filter, deodorized filters, etc. of air purifiers and to study new types of purified filters that can improve ultrafine dust, harmful gases, and sterilization cleanup performance. The study was also conducted by adding photocatalyst filters to the existing step-by-step filtration filter types, which were proposed in the design three coupling structure filters of the left and right UV-LED installation frames and the photocatalyst coating honeycomb frame. Future research is needed on the effect of photocatalyst filters. This study was to investigate the application and structure of photocatalyst filters to air purifiers.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.24 no.3
• /
• pp.38-44
• /
• 1998

The skin permeation and the skin primary irritation of two UV filters from caprylic capryl triglyceride (oil), oil in water (O/W) and water in oil (W/O) emulsions, were evaluated. We selected octyl moth-oxycinnamate (OMC) broadly used in cosmetics and polymeric sunscreen agent (PSA, average MW: 2,000) synthesized by the coupling reaction of 2-ethylhexyl 4-hydroxycinnamate with poly vinylbenzyl chloride, as model UV filters. For in vitro skin permeation experiments, Franz diffusion cells (effective diffusion area:1.766cm) and the excised skin of female hairless mouse aged 8 weeks were used. Oil or emulsion containing UV filters was applied in the donor compartment. The skin primary irritation was evaluated with fe-male guinea pigs (8-10 weeks,350-400 g). In oil and emulsions, the skin permeability and the skin primary irritation of PSA were lower than those of OMC. The skin permeability of UV filters was lower when they were in oil-in-water emulsion (OIW) than water-in-oil emulsion (W/O). We suggest that O/W system would be more useful when compared with W/O system, and PSA could be a good candidate for a future sunscreen agent for reducing the skin irritation.

• Journal of Korean Society of Environmental Engineers
• /
• v.37 no.8
• /
• pp.472-479
• /
• 2015

This study was investigated occurrence and distribution patterns of UV filters in Nakdong River basin (mainstream, tributaries and sewage treatment plant (STP) effluents). 5 (EHS, BP-3, 4-MBC, BZC and EHMC) out of 7 UV filters were detected in 5 out of 20 sampling sites (mainstream and tributaries), 7 UV filters were not detected in mainstream samples, and the EHS, BP-3, 4-MBC, BZC and EHMC concentration levels in tributary samples were ND~60.8 ng/L, ND~72.1 ng/L, ND~57.2 ng/L, ND~60.1 ng/L and ND~85.2 ng/L, respectively. 5 (EHS, BP-3, 4-MBC, BZC and EHMC) out of 7 UV filters were detected in effluents of 11 STPs around the Nakdong River basin. The EHS, BP-3, 4-MBC, BZC and EHMC concentration levels in 11 STP effluents were ND~89.3 ng/L, ND~90.8 ng/L, ND~88.1 ng/L, ND~118.5 ng/L and ND~104.4 ng/L, respectively. According to the sampling season, distribution patterns and detected concentrations of 5 UV filters were similar in June and September 2014, but change ranges of distribution patterns and detected concentrations of 5 UV filters were highly variable in April and November 2014.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.44 no.6
• /
• pp.1205-1223
• /
• 2020

This research investigated the protective effect on hair for 3 commercial hair oil products containing UV filters upon UVA and UVB irradiation. Hair tresses each weighing 2 g were prepared from black virgin hair. Hair tresses treated with 0.5 g of hair oil were irradiated by UVA (365 nm) and UVB (302 nm) lamp for up to 600 hours. Color of hair was measured using a spectrocolorimeter, tensile strength and elongation of hair were measured using a biological tensile tester, surface morphology was examined using a scanning electron microscope. Experimental results were analyzed using SPSS statistical software. Hair color and tensile strength were both affected by UVA and UVB irradiation. Significant differences in the color and tensile strength were observed between untreated hair and hair treated with hair oils. Good UV protective effect observed in Oil 2 and Oil 3 was attributable to the type and the combination of UV filters contained in the products.

• Journal of Environmental Science International
• /
• v.23 no.6
• /
• pp.1037-1047
• /
• 2014

A highly sensitive analytical method based on stir bar sorptive extraction (SBSE) technique and gas chromatography/tandem mass spectrometry (GC/MS-MS) has been developed, allowing the simultaneous multi-analyte determination of seven UV filters in water samples. The stir bar coated with polydimethylsiloxane (PDMS) was added to 40 mL of water sample at pH 3 and stirred at 1,100 rpm for 120 min. Other SBSE parameters (salt effect and presence of organic solvent) were optimised. The method shows good linearity (coefficients > 0.990) and reproducibility (RSD < 12.9%). The extraction efficiencies were above 84% for all the compounds. The limits of detections (LOD) and limits of quantification (LOQ) were 2.1~8.6 ng/L and 6.8~27.5 ng/L, respectively. The developed method offers the ability to detect 8 UV filters at ultra-low concentration levels with only 40 mL of sample volume. Matrix effects in tap water, river water, wastewater treatment plant (WWTP) final effluent water and seawater were investigated and it was shown that the method is suitable for the analysis of trace level of 7 UV filters except of benzophenone (BP). The method developed in the present study has the advantage of being rapid, simple, high-sensitive and both user and environmentally friendly.

• Journal of Korean Society of Environmental Engineers
• /
• v.36 no.11
• /
• pp.739-746
• /
• 2014

In this study, The effects of empty bed contact time (EBCT) and water temperature on the biodegradation of 8 UV filters in biological activated carbon (BAC) process were investigated. Experiments were conducted at two water temperatures (7 and $18^{\circ}C$) and three EBCTs (5, 10 and 15 min). Increasing EBCT and water temperature increased the biodegradation efficiency of UV filters in BAC column. EHMC and BZC were the highest biodegradation efficiency, but BP and 4-MBC were the lowest. The kinetic analysis suggested a first-order reaction model for biodegradation of 8 UV filters at various water temperatures and EBCTs. The first-order biodegradation rate constants ($k_{bio}$) of 8 UV filters ranging from $0.2730{\sim}0.6365min^{-1}$ at $7^{\circ}C$ to $0.4824{\sim}0.8743min^{-1}$ at $18^{\circ}C$. By increasing the water temperature from $7^{\circ}C$ to $18^{\circ}C$, the biodegradation rate constants ($k_{bio}$) were increased 1.5~2.1 times.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.16 no.1
• /
• pp.1-7
• /
• 2004

This study has been numerically conducted to investigate the removal efficiency of Volatile Organic Compound (VOC) for different photocatalytic honeycomb filters. Recently, the photocatalysis is being applied to air-cleaner, air-conditioner and vacuum-cleaner with the capability of air-purification, sterilization and antibiosis. However, photocatalysis is less efficient than other methods for removing VOC except in the case of low concentration. So far most of studies have focused on an improvement of the photocatalytic materials, but this study have placed emphasis on the improvements of shape of photocatalytic honeycomb filter. UV irradiation, concentration profile and pressure drop have been investigated for different cross sections of filters and for different filter lengths. Light intensity is dropped sharply with increasing distance from the UV-lamp, and becomes very low in the middle of the filters. Since photocatalytic reaction rate is a function of light intensity, VOC concentration gradient might be small in the middle of long filters. Thus, most of reaction have risen within only three times of dimensionless axial distance. These results can be used effectively for the design of advanced photocatalytic honeycomb filters.

• Proceedings of the IEEK Conference
• /
• 1999.11a
• /
• pp.309-312
• /
• 1999

Fiber Bragg gratings have many applications such as fiber sensors, band-stop filters, add-drop filters, and mode convertors. In this paper, we present the fabrication method of various fiber Bragg gratings by using continuous wave UV-Argon(frequency-doubled Argon) laser. In our experiments, hydrogenation of fibers was used to enhance photosensitivity of fiber. And we fabricated fiber gratings by the phase mask method.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.31 no.3 s.52
• /
• pp.237-244
• /
• 2005

Sunscreens have been in use for about 70years and 'tanning without burning' was propagated as their major advantage. The objective changed from 'getting a tanned skin' to 'getting skin protection' since UV have been proposed to a major risk of skin cancer and the risk of developing skin cancer related also to non-burning UVA. The new expectation from consumers has triggered the development of new UV absorbers and led to the approval of 7 new, organic UV absorbers in Europe over the last few years. The significant progress due to these new UV absorbers will be discussed in this report. These UV absorbers provide an efficient absorption of UV radiation (UVB and/or UVA) and easily incorporate in any kind of formulation. These are also safe, i.e. devoid of adverse effects. These new filters give the formulators new possibilities to cover the whole UV range iron 290 to 400 nm, and also to use less filter due to the boosting effect of the new UVA and broadband fitters.