• Journal of the Korean Society of Safety
• /
• v.21 no.3 s.75
• /
• pp.53-58
• /
• 2006

Following a Mediterranean fruit fly outbreak in South Australia, a bait spray program involving the pesticides like malathion(MAL) was carried out. During the application, dermal exposure was considered for the pest controllers wearing PVC gloves. However there is a lack of information about PVC glove performance like break through times and permeation rates with MAL, therefore, a new analytical method for HPLC-UV was developed. A standard permeation test cell was used in this study. From the results of this study, more than 96% solubility of MAL was provided at 30% isopropyl alcohol in distilled water as a collecting media. However, there was significant decomposition of MAL when the solutions were kept at over $50^{\circ}C$ for 2-3 hours. As a mobile phase, 50% acetonitrile water solution (pH 6.0) gave the greater sensitivity compared with other compositions of acetonitrile solution. The arm section of the gloves had shorter breakthrough times and higher permeation rates compared with the palm. There was no malathion solution breakthrough up to 24 hours using the 1% MAL working strength solution. When the temperature was changed from $22{\pm}1^{\circ}C\;to\;37{\pm}1^{\circ}C$, the breakthrough times were decreased by 14.5% on palm and 37.5% on arm, and permeation rates were increased significantly. The findings of this study indicate that further investigations on used gloves, periods of use and varying working conditions like tasks and seasons should be carried out to assess potential worst case scenarios.

• Analytical Science and Technology
• /
• v.31 no.5
• /
• pp.179-184
• /
• 2018

Diphencyprone (DPCP) is frequently used as a compounded preparation in dermatology for the treatment of alopecia and recalcitrant warts based on the immune reaction of skin allergy. However, DPCP is a non-recognized agent in Pharmacopoeia, because there are no criteria or analytical method for quality control of its powder and formulation. DPCP is unstable under light irradiation because as it easily decomposes to diphenylacetylene (DPA). This study aims to develop a simultaneous HPLC analytical method for analyzing DPCP and DPA in the raw materials and compounded preparation. The method required a C18 column ($250{\times}4.6mm$, $5{\mu}m$) at $40^{\circ}C$ with a mobile phase of (A) 0.01 M phosphoric acid in water and (B) acetonitrile at UV 220 nm. DPA conversion to DPCP in the powder and compounded preparations was accelerated after light exposure for 60 min. In addition, this resulted in different patterns depending on the wavelength of light and the formulation. That is, DPCP in compounded preparation was more unstable than that in the powder. However, the DPCP formulation in amber bottles was observed to remain stable, although the measured concentrations of DPCP were somewhat different from the nominal concentration of the compounded preparations. The control of the exact concentration is required for effective disease treatment, depending on the state of the patient. In conclusion, these results will be useful for the recognition of DPCP in Pharmacopoeia and new DPCP formulation development to prevent photodecomposition.

• Nutrition Research and Practice
• /
• v.10 no.4
• /
• pp.371-376
• /
• 2016

BACKGROUND/OBJECTIVES: Chronic ultraviolet (UV) exposure-induced reactive oxygen species (ROS) are commonly involved in the pathogenesis of skin damage by activating the metalloproteinases (MMP) that break down type I collagen. Adenophora remotiflora (AR) is a perennial wild plant that inhabits Korea, China, and Japan. The present study investigated the protective effects of AR against UVB-induced photo-damage in keratinocytes. MATERIALS/METHODS: An in vitro cell-free system was used to examine the scavenging activity of 2,2-diphenyl-1-picrylhydrazyl (DPPH) free radical and nitric oxide (NO). The effect of AR on ROS formation, antioxidant enzymes, elastase, MMP-1 level, and mRNA expression of MMP-1 were determined in UVB-irradiated human keratinocyte HaCaT cells. RESULTS: AR demonstrated strong DPPH free radical and NO scavenging activity in a cell-free system exhibiting $IC_{50}$ values of 1.88 mg/mL and 6.77 mg/mL, respectively. AR pretreatment dose-dependently attenuated the production of UVB-induced intracellular ROS, and antioxidant enzymes (catalase and superoxide dismutase) were enhanced in HaCaT cells. Furthermore, pretreatment of AR prevented UVB-induced elastase and collagen degradation by inhibiting the MMP-1 protein level and mRNA expression. Accordingly, AR treatment elevated collagen content in UVB-irradiated HaCaT cells. CONCLUSION: The present study provides the first evidence of AR inhibiting UVB-induced ROS production and induction of MMP-1 as a result of augmentation of antioxidative activity in HaCaT human keratinocytes. These results suggest that AR might act as an effective inhibitor of UVB-modulated signaling pathways and might serve as a photo-protective agent.

• The Korean Journal of Physiology and Pharmacology
• /
• v.1 no.5
• /
• pp.581-589
• /
• 1997

This study was undertaken to examine the effects of ultraviolet light (UVL) and rebamipide on the cutaneous blood flow and tissue survival on rabbit skin flap. In a random bipedicle flap, Laser Doppler Flowmetry (LDF) was employed to measure the blood flow of flap (BFF). Wound Margin Strength (WMS) measured by force transducer and Light microscophy were used for evaluation of tissue viability. Single exposure to UVL increased the BFF gradually for more than 15 hours, and decreased the vasoconstrictor effect of intravenous phenylephrine. The UVL-induced increase in BFF regressed after 18 hours of irradiation, and this regression was tended to be enhanced by intradermal injection of L-NAME, a nitric oxide synthase (NOS) inhibitor, but the regression was significantly reversed by acetylcholine, an endothelial constitutive NOS (cNOS) activator and L-arginine, an NO precusor. Rebamipide, a novel antiulcer agent known to scavenge the hydroxyl radical, abruptly reversed the spontaneous regression of the UVL- induced increase in BFF by the same manner as L-arginine. In ischemic skin flap, rebamipide increased the BFF abruptly by the same manner as sodium nitroprusside (SNP), an NO doner, while N-acetylcystein (NAC), a free radical scavenger, gradually increase the BFF. The rebamipide-induced increase in BFF was sustained at the level of the SNP-induced increase in BFF during the late period of experiment. Rebamipide increased the WMS of skin flaps and prevented the tissue necrosis in comparison with L-NAME. Based on these results, it is concluded that in rabbit skin, UVL irradiation increases the BFF by NO release, and rebamipide exerts a protective effect on the viability of ischemic skin flaps by either or both the increase in BFF by NO release and free radical scavenger effect.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2011.05a
• /
• pp.11.2-11.2
• /
• 2011

Polymer based organic photovoltaics have attracted a great deal of attention due to the potential cost-effectiveness of light-weight and flexible solar cells. However, most BHJ polymer solar cells are not thermally stable as subsequent exposure to heat drives further development of the morphology towards a state of macrophase separation in the micrometer scale. Here we would like to show three different approaches for developing new electroactive polymers to improve the thermal stability of the BHJ solar cells, which is a critical problem for the commercialization of these solar cells. For one of the examples, we report a new series of functionalized polythiophene (PT-x) copolymers for use in solution processed organic photovoltaics (OPVs). PT-x copolymers were synthesized from two different monomers, where the ratio of the monomers was carefully controlled to achieve a UV photo-crosslinkable layer while leaving the ${\pi}-{\pi}$ stacking feature of conjugated polymers unchanged. The crosslinking stabilizes PT-x/PCBM blend morphology preventing the macro phase separation between two components, which lead to OPVs with remarkably enhanced thermal stability. The drastic improvement in thermal stabilities is further characterized by microscopy as well as grazing incidence X-ray scattering (GIXS). In the second part of talk, we will discuss the use of block copolymers as active materials for WOLEDs in which phosphorescent emitter isolation can be achieved. We have exploited the use of triarylamine (TPA) oxadiazole (OXA) diblock copolymers (TPA-b-OXA), which have been used as host materials due to their high triplet energy and charge-transport properties enabling a balance of holes and electrons. Organization of phosphorescent domains in TPA-b-OXA block copolymers is demonstrated to yield dual emission for white electroluminescence. Our approach minimizes energy transfer between two colored species by site isolation through morphology control, allowing higher loading concentration of red emitters with improved device performance. Furthermore, by varying the molecular weight of TPA-b-OXA and the ratio of blue to red emitters, we have investigated the effect of domain spacing on the electroluminescence spectrum and device performance.

• Korean Chemical Engineering Research
• /
• v.48 no.4
• /
• pp.470-474
• /
• 2010

In this study, we presents a simple microfluidic approach for generating uniform Poly(ethylene glycol)(PEG) microfiber. Elongated flow pattern of monomer induced by sheath flow of immiscible oil as continuous phase is generated in Y-shape junction and in situ polymerization by UV exposure. For uniform microfiber, we investigate the optimized flow condition and draw phase diagram as function of Ca and Qd. At the region for stable elongated flow pattern, the microfiber generated in microfluidic chip is very uniform and highly reproducible. Importantly, the thickness of microfibers can be easily controlled by flow rate of continuous and disperse phase. We also demonstrate the feasibility for biological application as encapsulating FITC-BSA in PEG microfiber.

• Journal of the Microelectronics and Packaging Society
• /
• v.11 no.1
• /
• pp.21-28
• /
• 2004

We have demonstrated the applicability of dry film photoresist (DFR) in photolithography process for fine pitch solder bumping on the polytetrafluoroethylene (PTFE/Teflon ) printed circuit board (PCB). The copper lines were formed with 100$\mu\textrm{m}$ width and 18$\mu\textrm{m}$ thickness on the PTFE test board, and varying the gaps between two copper lines in a range of 100-200$\mu\textrm{m}$. The DFRs of 15$\mu\textrm{m}$ thickness were laminated by hot roll laminator, by varying laminating temperature from $100{\circ}C$ to 15$0^{\circ}C$ and laminating speed from 0.28-0.98cm/s. We have found the optimum process of DFR lamination on PTFE PCB and accomplished the formation of indium solder bumps. The optimum lamination condition was temperature of $150^{\circ}C$ and speed of about 0.63cm/s. And the smallest size of indium solder bump was diameter of 50$\mu\textrm{m}$ with pitch of 100$\mu\textrm{m}$.

• BMB Reports
• /
• v.35 no.4
• /
• pp.358-363
• /
• 2002

Chemical and photochemical processes during storage and preparation rapidly degrade retinol, the most active form of vitamin A. therefore, the efficacy of incorporation into liposomes in order to modulate the kinetics of retinol degradation was investigated. Retinol was readily incorporated into multilamellar liposomes that were prepared form soybean phosphatidylcholine; the extent of the incorporation was 98.14±0.93% at pH 9.0 at a ratio of 0.01 : 1 (wt:wt) retinol : phospholipid. It was only marginally lower at higher retinol concentrations. The pH of the hydration buffer had a small effect. The incorporation efficiency ranged from 99.25±0.47% at pH 3 to 97.45±1.13% at pH 11. The time course of the retinol degradation in the aqueous solution in liposomes was compared to that of free retinol and free retinol with α-tocopherol under a variety of conditions of pH(3, 7, and 11), temperature(4, 25, 37, and 50℃), and light exposure(dark, visible, and UV). The retinol that was incorporated into the liposomes degraded significantly slower than the free retinol or retinol with α-tocopherol at pH 7 and 11. At pH 3, where the free retinol degrades rapidly, the degradation kinetics were similar in liposomes and the presence of α-tocopherol. At pH 7.0 and 4℃ in the light, for example, free aqueous retinol was completely degraded within 2 days, while only 20% of the retinol in the liposomes were degraded after 8 days. In general, the protective effect of the liposome incorporation was greater at low temperatures, at neutral and high pH, and in the dark. The results suggest that protection is greater in the solid, gel phase than in the fluid liquid crystalline phase lipids. These results indicate that the incorporation into liposomes can extend the shelf-life of retinol under a variety of conditions of temperature, pH, and ambient light conditions.

• BMB Reports
• /
• v.39 no.5
• /
• pp.618-625
• /
• 2006

The infiltration of both monocyte and activated T cells in the skin is one of critical steps in the development of UVB-induced inflammation. Upregulation of adhesion molecules such as intercellular adhesion molecule 1 (ICAM-1) on the surface of keratinocytes plays an important role in this process. In this study, we examined the molecular mechanism responsible for UVB-induced expression of ICAM-1 and subsequent monocyte adhesion by keratinocyte. We observed that (1) UVB induced protein and mRNA expression of ICAM-1 in a dose- and time-dependent manner in human keratinocyte cell HaCaT; (2) UVB induced the translocation of NF-kappaB and inhibition of NF-kappaB by NF-kappaB inhibitors suppressed UVB-induced mRNA and protein expression of ICAM-1; (3) UVB increased the intracellular level of reactive oxygen species (ROS) by HaCaT cells; (4) UVB-induced increase of intracellular ROS level was suppressed by pre-treatment with diphenyl iodonium (DPI) and N-acetyl cysteine (NAC); and (5) inhibition of UVB-induced ROS production by DPI or NAC suppressed UVB-mediated translocation of NF-kappaB, expression of ICAM-1 and subsequent monocyte adhesion in HaCaT cells. These results suggest that UVB-induced ROS is involved in the translocation of NF-kappaB which is responsible for expression of ICAM-1 and subsequent increased monocyte adhesion in human keratinocyte.

• Applied Chemistry for Engineering
• /
• v.31 no.4
• /
• pp.390-397
• /
• 2020

To synthesize non-corrosive metallic gold colored α-Al₂O₃ nanoplate-TiO₂ core-shell pigments with controlled roughness, we systematically checked the morphological variation of the TiO₂ shell with the mole ratio of TiCl₄ and NaOH from 1 : 1 to 1 : 1.5, 1 : 2, 1 : 2.5, 1 : 3, 1 : 3.5, and 1 : 4. The more increased mole ratio of TiCl₄ and NaOH resulted in the smoother TiO₂ shell due to the promoted formation of anatase TiO₂ than that of the rutile one. By the heat-treatment of pigments at 500 ℃, we could improve the adhesiveness between TiO₂ shell and α-Al₂O₃ nanoplates without changing their topology and roughness. In addition, the α-Al₂O₃ nanoplate with the robust TiO₂ by heat-treatment exhibited comparable photo-stability against photo-catalytic degradation by UV exposure compared with the commercially available α-Al₂O₃/TiO₂ lustering pigment.